Heitronic 36035, 36036, 36041, 36042 Installation and operating instructions
GB Installation and operating instructions
Heitronic
®
LED ground spike
Art. No. 36035,36036,36041,36042
Many thanks for deciding to buy our lights.
Our LED ground spike is made out of sturdy, high value materials and will provide you with quality
lighting. The LED ground spike consists of a stablehousing and a connection cable. It can be used
both indoors and outdoors.
Please read through installation and operation instructions carefully and keep these in a safe
place.
We do not accept liability for damage to persons or property caused by non observation of the
instructions, improper handling or for unauthorized changes made to the product.
Package contents:
1 x LED ground spike with LED illuminants
Installation and operating instructions
Technical data:
Article Connection Burden Illuminant
Protection
type
Protection
Class
LED illuminant, GU 5,3
36035 12 V AC 5kN
3W, only LED max.3,5W,
IP67 III
can be changed
LED illuminant, GU 5,3
36036 12 V AC
5kN
3W, only LED max.3,5W,
IP67 III
can be changed
LED illuminant, GU 5,3
36041 12 V AC -
3W, only LED max.3,5W,
IP67 III
can be changed
LED illuminant, GU 5,3
36042 12 V AC -
3W, only LED max.3,5W,
IP67 III
can be changed
Before Installation:
The ground spike may only be used after it has been taken out of the packaging.
Take the parts carefully out of the packaging.
Make sure, before using the lighting system that this has not been damaged during
transportation. The lighting system must not be operated if there is damage to cable or the
electrical parts are damaged. Each faulty fuse has to be replaced. Repairs may only be done
by a specialist electrician.
Keep packaging materials well away from children and pets. Danger of suffocation!
Safety and warning notes:
Do not look directly into the LED - especially for longer periods of time - without protecting
your eyes. A LED beam should not be directed into other people's eyes.
Operation is strictly forbidden if there is damage to the lights, plugs or the supply line.
Never make your own repairs to faulty parts. Repairs must be done by trained specialists.
Do not leave children unattended in the area of the lights or other electrical appliances.
Never expose the lights to a direct jet of water (high pressure cleaner, for example) and never
immerse the lights into water or other liquids!
Do not expose the lights to extreme heat or exposed flames.
The entire product must neither be changed nor converted. Changes made to the lighting set
lead to invalidation of the guarantee (warranty).
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein
Installation instructions Art. No. 36035,36036,36041,36042 Page 1 of 2 Status 08.2014
Care and servicing:
Heitronic
®
You must make sure that the power supply is disconnected before cleaning.
Use a dry, or slightly damp cloth for cleaning.
Never use chemicals or abrasives for cleaning. Do not use road salt in the winter.
Disposal:
Old electronic equipment must be brought to public connection points and must not be
disposed of as household waste.
Installation:
Perform all handling operations on the ground spike only when the power is disconnected.
Place the ground spike at the selected place by following the safety and warning notes. Make
sure that no water can collect at the location.
Push the ground spike into the ground by hand. Please do not use a hammer or similar tool to
do this.
The ground spike cannot be rammed into rock. There is danger of injury and the spike could
become damaged.
Position the ground spike at the desired place. Make sure that the ground spikes are firmly
connected with the base.
Make sure that there are no obstacles in the walking area when laying the cable.
The ground spike and the cable must not be buried into the ground and must be freed from
leaves and dirt if necessary.
Check the entire system at regular intervals for tightness, ability to function and possible
damage.
Check the proper connections once again.
The name plate must not be removed.
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein
Installation instructions Art. No. 36035,36036,36041,36042 Page 2 of 2 Status 08.2014
Loading...