Heinner HWM-V8214A++ User guide

Page 1
AUTOMATIC WASHING MACHINE
Model: HWM-V8214A++
Automatic washing machine Loading capacity: 8 kg Spin capacity: 1400 rpm Energy class: A++
Page 2
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
Thank you for purchasing this product!
I. INTRODUCTION
Before using the appliance, please read carefully this instruction manual and keep it for future reference.
This instruction manual is designed to provide you with all required instructions related to the installation, use and maintenance of the appliance. In order to operate the unit correctly and safety, please read this instruction manual carefully before installation and usage.
II. CONTENT OF YOUR PACKAGE
Washing machine User manual Warranty card
1
Page 3
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
III. SAFETY PRECAUTIONS
1. Your machine is designed to be used domestically. Commercial use
will cause your warranty to be cancelled.
2. Keep your pets away from your machine.
3. Please check the packaging of your machine before installation, and
the outer surface after the package is opened. Do not operate damaged machines or machines with opened package.
4. Have your machine installed only by authorized service. Any
interference to your machine by anyone other than authorized services shall cause your warranty to be void.
5. The appliance is not intended for use by people (including children)
with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsi- ble for their safety. Children should be supervised to ensure that they do not play with the appliance.
6. Use your machine only for laundries that have been specified as
suitable for washing by the manufacturer.
7. Before operating the washing machine, remove the 4 transportation
screws and rubber spacers from the back of the machine. If the screws are not removed, it may cause heavy vibration, noise and product malfunction, (voiding the guarantee).
8. Your machine is not covered under warranty for faults caused by any
kind of external factors (pesticides, fire, etc.)
9. Please do not throw away this user manual; keep it for future
reference. You or somebody else might need it in the future. Note: Machinery specifications may vary depending on the product purchased.
10. The necessary ambient temperature for your machine’s ideal
operation is 15-25°.
11. Frozen hoses can tear and explode. In regions where temperature is
below zero, ambient temperature might endanger the safe operation
of electronic card.
12. Please ensure that the clothes you will place in your machine do not
contain any foreign substances (nail, needle, coins, lighter, matches,
clip etc.) in their pockets. These foreign substances can damage your
machine.
13. Before starting to use your machine, you may call the nearest
authorized service and request free-of-charge help for installation,
operation and use of your machine.
14. It is recommended to perform the first washing operation in 90˚
Cotton programme and without laundry by inserting ½ scale of
detergent in 2nd compartment of the detergent drawer.
15. As detergent or softener exposed to air for a long time may cause
residues, put your detergent or softener in the detergent drawer at
the beginning of every washing.
16. It is advised that you unplug your machine and close the water inlet
tap if you will not use your machine for a long time. Also, leaving the
door of your machine will prevent the formation of bad odors due to
humidity.
2
Page 4
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
17. Some water might be left in your machine after the trials and tests
conducted due to Quality Control procedures. This will not damage
your machine.
18. Remember that packaging materials of your machine may be
dangerous for children.
19. Keep the packaging materials in a place where children cannot reach
or dispose of them appropriately.
20. Use pre-wash programs only for very dirty laundry.
21. Never open the detergent drawer when the appliance is running.
22. In case of any breakdown, unplug the appliance first and then turn the
tap off. Do not attempt to repair by yourself, always contact for
authorized service advice.
23. The amount of laundry you put in your washing machine should not
exceed the maximum amount indicated.
24. Never force the door to open when the machine is running.
25. Washing floury clothes in your machine damages the machine. Do not
wash floury clothes in your machine.
26. Please adhere to detergent/fabric conditioner manufacturers’ the use
of fabric conditioner or similar products in your machine.
27. Set up your machine in a place where its door can be completely
opened. (Do not set up your machine in places where its door cannot
be fully opened.)
28. Set up your machine at locations that can be fully ventilated and could
have constant air circulation.
You must read these warnings. You can thus protect yourself and your beloved ones against fatal injuries and risks.
DANGER OF GETTING BURNT!
Do not touch discharging hose and water during discharging as the appliance may reach high temperatures when running.
3
Page 5
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
DEATH RISK DUE TO ELECTRICAL CURRENT!
1. Do not use multiple receptacles or extension cord.
2. Do not plug in damaged plug sockets.
3. Never pull the cable when unplugging – always grip the plug itself.
4. Do not plug-in or out the plug from the receptacle with wet hands to prevent
electrocution!
5. Never touch the machine with wet hands or feet.
6. Call the nearest authorized service for a replacement if the power cord malfunctions.
FLOODING RISK!
1. Check whether the water runs fast or not before placing the discharge hose on the
sink.
2. Take necessary measures to prevent the slipping of your hose.
3. The backfiring force of a hose that is not placed appropriately can displace the hose.
Prevent the stopper inside your sink from blocking the sink hole.
4
Page 6
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
DANGER OF FIRE!
1. Do not keep inflammable liquids near your machine.
2. The sulphure content of paint removers might cause corrosion. For this reason, never
use paint-removing materials in your machine.
3. Never use products that contain solvent material (like washing gas) in your machine.
4. Remove all the objects in the pockets of your laundries (needle, paperclip, lighter,
matches etc.) when placing them your machine.
Fire and Explosion risk may occur.
FALL AND INJURY HAZARD!
1. Do not climb on your machine. The upper table of your machine may break and you
might get injured.
2. Tidy the hose, cable and packaging of your machine during installation. You might trip
over and fall.
3. Do not turn your machine upside down, or on its side.
4. Do not lift your machine by holding it from extruding parts (detergent drawer, door).
These parts might break and cause you to get injured.
5. There’s the risk of tripping and injury if the materials like hose and cables are not
properly stored after your machine is installed.
Machine must be carried by 2 people or more.
CHILD SAFETY!
1. Do not leave children unattended near the machine. Children might lock themselves
up into the machine and death risk might occur.
2. Door glass and surface might be extremely hot while your machine operates. Thus,
especially touching the machine might give damage to the skins of children.
3. Keep packaging material away from children.
4. Poisoning might occur if the detergent and maintenance materials are consumed, and
eyes or the skin might be irritated if they come into contact with the skin. Keep the cleaning materials away from the reach of children.
SAVING INFORMATION
Some important information to get more efficiency out of your machine: The amount of laundry you put in your washing machine should not exceed the maximum amount indicated. By this way, your machine shall run in saving mode. Not using the pre-wash feature for little and normal-dirty laundry shall save electricity and water.
5
Page 7
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
V. PRODUCT DESCRIPTION
6
Page 8
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
7
Page 9
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
REMOVING THE SCREWS
1. Before operating the washing machine, remove the 4 transportation screws and
rubber spacers from the back of the machine. If the screws are not removed, it may cause heavy vibration, noise and product malfunction, (voiding the guarantee).
2. For this reason, transportation safety screws shall be loosened by being rotated in
counter-clockwise using an appropriate wrench.
3. Transportation screws shall be removed by pulling out.
4. Fit the plastic transportation screw taps delivered in accessories bag to the palces
where transportation screws have been removed.
5. The transportation safety screws should be stored to be used in case of
transportation.
NOTE: You should absolutely remove the transportation screws of your machine before the first usage. Faults occurring in the machines operated with transportation screw fitted shall be out of scope of warranty.
VI. INSTALLATION
8
Page 10
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
ADJUSTMENT
Do not install your machine on a carpet or such grounds that would prevent the ventilation of its base. To ensure silent and vibration-free operation of your machine, it should be deployed on a non-sliding and firm ground. You can adjust the balance of your machine through the stays. Loosen the plastic adjustment nut.
Adjust the stays upward and downward by rotating them. After maintaining the balance, compress the plastic adjustment nut upward again. Never put cardboard, wood or suchlike materials under your machine if you are intending to stabilize the distortions on the ground. When cleaning the ground, on which your machine rests, be careful not to disorder stays stabilization.
9
Page 11
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
ELECTRICAL CONNECTION
Your washing machine is set to 220-240V and 50Hz.
The mains cord of your washing machine is equipped with a specific earthed plug.
This plug should always be inserted to a earthed socket of 10 amps.
The current value of the fuse should be 10 amps. Fuse current value of the power
line connected to this plug should also be 10 amperes.
If you don’t have such a receptacle and fuse confirming with this, please have it
done by a qualified electrician.
We do not take the responsibility of the damages that occur due to ungrounded
usage.
NOTE: Operating your machine under low voltage will cause the life cycle of your machine to be reduced and its performance to be restricted.
WATER INLET HOSE CONNECTION
Your machine may have either a single inlet (cold) or double water inlets (cold/hot)
based on its specifications. White-capped hose should be connected to cold water inlet
and red-capped hose to hot water inlet (applicable for machines with double water
inlets).
To eliminate water leakages in points of contact, 1 or 2 nuts are provided in the hose
package (applicable for machines with double water inlets). Fit these nuts to the ends
of new water inlet hoses on the side of faucet.
Mount new water inlet hoses to a ¾ ˝, threaded faucet. Connect the white-elbow end of the water inlet hoses to the white-filtered water inlet
valve on the rear side of the machine and the red-elbow end to red-filtered one
(applicable for machines with double water inlets). Tighten plastic parts of the
junctions using your hand. In uncertain conditions, have the connection works be done
by a qualified plumber.
Flow of water with pressure of 0,1-1 Mpa will allow your machine to operate more
efficiently.) (0,1 Mpa pressure means that more than 8 litres of water will flow through
a fully-tapped faucet per one minute.)
Ensure that points of contact do not leak by tapping the faucet completely after
carrying making the connections.
Ensure that the new water inlet hoses are not bent, broken, crushed and resized. If your machine has double hot water inlets, the temperature of hot water inlet should
be maximum 70°C.
3/4”
10
Page 12
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
Note: Use only the new water inlet hose coming with your machine while making water inlet connections of your machine. Never use old, used or damaged water inlet hoses.
WATER DISCHARGE CONNECTION
The end of water discharge hose can be fitted to a specific apparatus directly attached
to dirty water discharge hole or outlet joint of the basin elbow.
Never attempt to extend the water discharge hose by jointing. Do not put discharging hose of your machine in a vessel, bucket or sink. Make sure that the water discharge hose does not bend, buckle, be crushed or
extended. Please note: The water drain hose should be mounted at a height maximum
100 cm from the ground.
~ 95 cm
~ 145 cm
~ 140 cm
~ 95 cm
95 cm
150 cm
11
Page 13
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
VII. CONTROL PANEL
You can use the liquid level determination plate when you want to wash your laundry with liquid detergent. You can use your liquid detergents in all programs without prewashing. Place the liquid detergent aparatus in the second compartment (which is available inside the machine) of the detergent drawer and set the detergent amount. (Use the recommended amount of liquid detergent by detergent producers). Do not exceed the MAX level, use only for liquid detergent, do not use this aparatus for powder detergent and take it out.
12
Page 14
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
Machinery specifications may vary dependind on the product purchased.
Main wash detergent compartment:
In this compartment, only materials like detergent (liquid or powder), lime preventer and such can be used. You can find the liquid detergent aparatus inside your machine at first installation.
Fabric conditioner, starch, detergent compartment:
You can use softener for your laundry (recommended amount and type by the producer is recommended). Sometimes the fabric conditioners you use for your laundry mar remain in this compartment. The reason for this is that the conditioner is not viscous. To prevent this situation, more viscuous liquid softeners are recommended to be used or the softener could be thinned and then used. Pre-wash detergent compartment: This compartment must only be used when the pre-wash feature is selected. Pre-wash feature is recommended for very dirty laundry.
13
Page 15
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
You can select the programme you want to wash your laundry in through programme knob. You may set the programme selection operation by rotating the programme knob in both directions. Ensure that the programme knob is exactly on the programme you want to select.
VII. PROGRAM KNOB
14
Page 16
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
On the display panel, you may see delay timer of your machine, speed setting of your machine, the auxiliary functions you have selected and stage of the programme you are running on your machine ( pre wash / wash state, rinsing stage, spinning stage). Furthermore, electronic display will warn you by means of led combinations that will turn on its display when a fault occurs on your machine and notify you of the completion of the washing programme by revealing expression of “End” on the display as soon as the washing programme you have selected has finished as well.
VIII. ELECTRONIC DISPLAY
15
Page 17
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
SEPARATING LAUNDRIES
Your laundry has product labels on them that specifiy their specifications. Wash or dry
your laundry according to the specifications on the product label.
Separate your laundries according to their types (cotton, synthetic, sensitive, wool
etc.), their temperatures (cold, 30°, 40°, 60°, 90°) and degree of contamination (slightly
stained, stained, highly stained).
Never wash your coloured and white laundry together. Wash your coloured laundries separately in the first washing as they may bleed. Ensure that there are no metallic materials on your laundries or in the pockets; if so,
take them up.
CAUTION: Faults that will emerge in case of penetration of foreign substances into
your machine are not included within the scope of warranty.
Zip up and button up your laundries. Remove the metallic or plastic hooks of tulle curtains or curtains or place them in a
washing net or bag and then muzzle them.
Reverse textiles such as pants, knitwear, t-shirt and sweat suit. Wash socks, handkerchief and suchlike small laundries in a washing net.
IX. USING YOUR APPLIANCE
16
Page 18
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
17
Page 19
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
PUTTING LAUNDRIES IN THE MACHINE
Open the door of your machine. Spread your laundries in your machine.
NOTE: Maximum loading capacity may vary based on the laundry type you will wash, degree of contamination and the programme you have chosen. Do not exceed maximum dry loading capacity indicated in the programme table for washing programmes.
You can take the following table of weights as an example:
Laundry type
Weight (gr)
Towel
200
Linen
500
Nathrobe
1200
Quilt cover
700
Pillow slip
200
Underwear
100
Tablecloth
250
Put each item of laundry separately. Ensure that no laundry is stuck between the cover and bellow seal when closing
the door of your machine.
Push the door of your machine until hearing the locking sound to close it. Close the door of your machine properly, otherwise your machine will not start the
washing operation.
CLICK
18
Page 20
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
ADDING DETERGENT INTO MACHINE
The amount of detergent you will put in your machine will depend on the following
criteria:
• Your detergent utilization will be based on the degree of contamination of your laundries.
Do not prewash your less stained laundries and put your slight amount of detergent in the 2nd compartment of the detergent drawer.
• For your much stained laundries, select a programme including prewashing, and put ¼ of
the detergent you will put in the detergent drawer in the 1st compartment of the detergent drawer while putting the remaining ¾ of it into 2nd compartment.
• Use detergents produced for automatic washing machine in your machine. The amount
of detergent you will use for your laundries is printed on the detergent package.
• The higher the degree of hardness of the water the more detergent you will use.
• The amount of the detergent you will use will increase as the amount of your laundries
increase.
• Put the softener in the softener compartment in the detergent drawer. Do not exceed
the MAX level. Otherwise, softener will flow into washing water through flushing.
• Softeners with high density are required to be thinned to a degree before being put in
the drawer. Because high-density softener will clog the flush and avoid the flow of the softener.
• You can use your liquid detergents in all programs without prewashing. For this, fit liquid
detergent level plate in the accessories bag or the liquid detergent apparatus (*) into 2nd compartment of the detergent drawer and set the amount of liquid detergent according to the levels on this plate. Remember to detach the liquid detergent plate.
19
Page 21
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
OPERATING YOUR MACHINE
1. Plug your machine in.
2. Open the water faucet.
3. Open the machine door.
4. Spread your laundries in machine.
5. Push the door until hearing the locking sound to close it.
SELECTING PROGRAMME
Select the convenient programme for your laundries on the programme table.
AUXILIARY FUNCTIONS
Before starting the p[rogramme, you can optionally select an auxiliary function. Press on the button of auxiliary function you would like to select. If auxiliary function symbol on electronic display flashes continuously, the auxiliary function you have selected will be activated. If auxiliary function symbol on electronic display blinks, the auxiliary function you have selected will not be activated.
Reason for non-activation:
The auxiliary function you want to use in the washing programme you have selected is
not applicable.
Your machine has passed over the stage, during which the auxiliary function you would
like to select would be implemented.
It is not compatible with an auxiliary function you have selected previously.
HALF-LOAD DETECTION SYSTEM Your machine features a half-load detection system. In case you put approximately half or less amount of laundries of maximum laundry capacity in your machine, your machine will run so as to save washing time, watre consumption and energy in some programmes. When the half-load function is active, the machine acn complete the programme you have set in a shorter time.
20
Page 22
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
1. DELAY TIMER By using this auxiliary function, you can make your machine to start the washing operation with delays between “3h, 6h, 9h, 12h”.
To use auxiliary function of delayed start:
Press the delayed start button once.s
- “3 h” led shall appear.
- Press on delayed start button until the time, on which you want washing operation to be started.
- To activate the time delay you have selected in the programme, you may press on any auxiliary function button you like except “Start/ Pause” button.
2. SPIN SPEED SELECTION
You can adjust the spin speed of your laundry with the spin speed setting button. When you select a new programme, the max. spin speed of the programme you have selected shall be displayed on the display panel. By pressing the spin speed setting button, you can change the spin speed of the selected programme between its max. value. If you have skipped the spin speed you want to set, you can re-switch to the revolution by keeping the speed setting button pressed.
3. EXTRA RINSE
You can make additional rinse operation on your laundry by using this additional function. You may make the programme active by pressing the extra rinsing auxiliary function button when the led light of the symbol turns on.
Auxiliary function
Auxiliary function button 2
Buttons 3 or 4
21
Page 23
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
4. PRE-WASH (*optional)
You can expose your very dirty laundries to prewashing operation prior to main washing by using this additional function. When using this function, you should put detergent in front washing compartment of the detergent drawer. You may make the programme active by pressing the pre-wash button on the display panel when the led light of the symbol
turns on.
5. ANTI-ALLERGIC (*optional)
In the programmes where this auxiliary function is active, you may have your machine perform an extra rinsing operation on your laundries prior to latest rinsing operation. You may make the programme active by pressing the anti-allergic button on the display panel when the led light of the symbol turns on.
6. RAPID WASH (*optional)
By using this auxiliary function, you can wash your laundry in a shorter time and spending less energy and water. ( It is advised that laundry that is less than half the capacity of the selected washing programme is placed.) You may make the programme active by pressing the rapid wash button on the display panel when the led light of the symbol turns on.
NOTE: In case you put half or less than half of the laundry capacity of the washing programme you have selected in your machine, your machine will detect this thanks to automotive half-load detection system and the programme you have selected will wash your laundries in a shorter time to consume less energy and water. If your machine detects half load, the led of the symbol will automatically flash on display panel.
7. COLD WASH( *optional)
You can use this auxiliary function when you want to wash your laundry with cold water (tap water). You may make the programme active by pressing the cold washing button on the display panel when the led light of the symbol turns on.
8. EASY IRONING
You can enable your laundries to be taken out less wrinkled as the washing operation is completed by employing this auxiliary function. You may make the programme active by pressing the easy ironing auxiliary function button when the led light of the symbol turns on.
Buttons 3 or 4
22
Page 24
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
9. NO SPIN BUTTON (*optional)
If you don’t want to perform wringing on your laundry, you can use this auxiliary function. You may make the programme active by pressing the wringing cancel button on the display panel when the led light of the symbol turns on.
START/PAUSE BUTTON
By pressing on the Start/Pause button, you may start the programme you have selected or suspend a running programme. If you switch your machine to the standby mode, the Start/Pause led on the electronic display will blink.
23
Page 25
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
CHILD LOCK
To avoid programme flow from being affected if programme buttons are pressed or programme button is turned when performing washing operation in your machine, child lock is available. Child lock will be activated in case pressed on both auxiliary functions 1 and 2 at the same time for more than 3 seconds. You can see the auxiliary function leds on the display when activated.
If pressed any button while child lock is active, the Additional Function Leds will blink on the display. If while the child lock is engaged and any programme is running, the programme knob is switched to the CANCEL position and another programme is selected, the programme previously selected continues from where it left. To deactivate it, it will be sufficient to press on the same buttons for more than 3 seconds. When the child lock is deactivated, the Additional Function Leds will blink on the display.
24
Page 26
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
CANCELLING PROGRAMME If you want to cancel any programme running:
Switch the programme knob to “CANCEL” position. Your machine will stop the washing operation and the programme will be cancelled. To get rid of the water accumulated in the machine switch the programme knob to any
programme.
Your machine will perform the necessary discharge operation and cancel the
programme.
You can run your machine by selecting a new programme.
FINISHING PROGRAMME
Your machine will stop by itself as soon as the programme you have selected finishes:
- The expression of “END” will flash on the electronic display
- You can open the machine’s door and remove the laundry.
- Leave the door of your machine open to allow the inner part of your machine to dry after removing your laundries.
- Switch the programme knob to CANCEL position.
- Unplug your machine.
- Turn the water faucet off.
25
Page 27
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
COTTON 90°
Washing temperature
90
Maximum dry laundry amount
8,0
Detergent compartment
2
Programme duration (Min)
187
Laundry type / descriptions
Very dirty, cotton and flax textiles (underwear, linen, tablecloth, towel max 4,0kg, bedclothes etc.)
PRE-WASH COTTON
Washing temperature
60
Maximum dry laundry amount
8,0
Detergent compartment
1&2
Programme duration
164
Laundry type / description
Dirty cotton and flax textiles (underwear, linen, tablecloth, towel max 4,0kg, bedclothes etc.)
COTTON ECO 60°
Washing temperature
60
Maximum dry laundry amount
8,0
Detergent compartment
2
Programme duration
240
Laundry type / description
Dirty cotton and flax textiles (underwear, linen, tablecloth, towel max 4,0kg, bedclothes etc.)
COTTON 40°
Washing temperature
40
Maximum dry laundry amount
8,0
Detergent compartment
2
Programme duration
235
Laundry type / description
Dirty cotton and flax textiles (underwear, linen, tablecloth, towel max 4,0kg, bedclothes etc.)
ECO 20°
Washing temperature
20
Maximum dry laundry amount
4,0
Detergent compartment
2
Programme duration
96
Laundry type / description
Less dirty, cotton and linen textiles (underwear, linen, tablecloth, towel max 2kg, bedclothes etc.)
VIII. PROGRAM TABLE
26
Page 28
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
EASY CARE
Washing temperature
40
Maximum dry laundry amount
3,5
Detergent compartment
2
Programme duration
110
Laundry type / description
Very sirty and synthetic-mixed textiles (nylon socks, shirts, blouses, synthetic – including trousers)
WOOL
Washing temperature
30
Maximum dry laundry amount
2,5
Detergent compartment
2
Programme duration
43
Laundry type / description
Woollen laundries with machine wash labels
RINSE
Washing temperature
-
Maximum dry laundry amount
8,0
Detergent compartment
-
Programme duration
42
Laundry type / description
If you want to additionally rinse your laundries upon completion of washing operation, you may use this program for any kind of laundries.
SPIN
Washing temperature
-
Maximum dry laundry amount
8,0
Detergent compartment
-
Programme duration
17
Laundry type / description
If you want to additionally Spinning yo laundries upon completion of washing operation, you may use this program for any kind of laundries.
HAND WASH / DELICATE
Washing temperature
30
Maximum dry laundry amount
2,5
Detergent compartment
2
Programme duration
90
Laundry type / description
Laundry recommended for hand wash or sensitive laundry.
27
Page 29
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
SPORTS WEAR
Washing temperature
30
Maximum dry laundry amount
3,5
Detergent compartment
2
Programme duration
80
Laundry type / description
Sportswear
MIXED
Washing temperature
30
Maximum dry laundry amount
3,5
Detergent compartment
2
Programme duration
81
Laundry type / description
Dirty cotton, synthetics, colour and flax textiles can be washed together
BLOUSES / SHIRTS
Washing temperature
60
Maximum dry laundry amount
4,0
Detergent compartment
2
Programme duration
114
Laundry type / description
Dirty cotton, synthetic and synthetic-mixed shirts and blouses can be washed together
DAILY 60 min
Washing temperature
60
Maximum dry laundry amount
4,0
Detergent compartment
2
Programme duration
60
Laundry type / description
You can wash dirty cotton, colour and flax textiles at 60° in 60 minutes
RAPID 15 min
Washing temperature
30
Maximum dry laundry amount
2,0
Detergent compartment
2
Programme duration
15
Laundry type / description
You can wash sligtly stained, cotton, coloured and flax textiles within only 15 minutes
NOTE: As the washing period is short, less amount of detergent is required to be used compared to other programmes. The programme period will increase if your machine detects instable loading. You can open the door of your machine 2 minutes after the completion of washing operation. (The duration of 2 minutes required to open the door of your machine is not included in the washing period.)
28
Page 30
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
WARNING!
Unplug your machine before starting the maintenance and cleaning of your machine. Turn the tap water off before starting the maintenance cand cleaning of your machine.
CAUTION: Your machine’s parts might be damaged if cleaners with solvent agents are
used. Do not use cleaning materials with solvent agents.
WATER INLET FILTERS
Filters to avoid dirt and foreign substances in the water from penetrating into the machine are available both on the side of faucet and on the ends of water valves along the water inlet hose of your machine. If your machine cannot intake sufficient amount of water despite water faucet being open, these filters should be cleaned. (It is recommended that you clean you pump filter one in 2 months)
1. Detach the water inlet hoses.
2. Remove the filters on water inlet valves using pliers and then clean it with a brush
in water.
3. Disassemble the filters on the side of faucet side of water inlet hoses manually and
clean it.
4. Having the filters cleaned, you can fit them in the same way reversely.
CAUTION: Filters of water inlet valves may be clogged due to contaminated water faucet or lack of necessary maintenance or valves may be broken down, causing water leaking into your machine continuously. The breakdowns that may arise due to these reasons are out of the scope of warranty.
IX. CLEANING AND MAINTENANCE
29
Page 31
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
PUMP FILTER
A filter system which avoids threads remaining from your laun- dries and tiny materials from entering into the pump during water discharging operation carried out by your machine after complet- ing washing so prolonging the lifecycle of your pump is available. It is recommended that you clean your pump filter once in 2 months. To clean pump filter: To open the pump cover, you can use the powder detergent spade or liquid detergent
level plate coming out of your machine.
Fit the end point of the plastic part to the gap of the pump cover and push it back. This
will open the cover.
Before opening the filter cover, settle a vessel in front of the filter cover to prevent the
water remained in the machine from flowing on the ground.
Loosen the filter cover in counter-clockwise and then empty water. Note: You may have to empty the water collection vessel several times according to the amount of water in the machine.
Clean the foreign materials in the filter with a brush. After cleaning the filter, fit the cover and tighten it by rotating it in clockwise direction. While closing the pump cover, ensure that the parts on the inner side of the cover to
match the holes on the front panel side.
You can reattach the pump cover in the reverse order that you removed it.
As water in the pump may be hot, wait until it cools down.
30
Page 32
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
DETERGENT DRAWER
Your detergents may deposit residue in detergent drawer and housing of detergent drawer over time. To clean the residue formed, disassemble the detergent drawer in particular periods. It is recommended that you clean your pump filter every 2 months. To eject the detergent drawer:
- Pull the detergent drawer up to the end
- Keep on pulling by depressing on the section shown below in the detergent drawer and keep pulling and then unsettle the detergent drawer
- Flush it using a brush.
- Collect residues in the housing of the detergent drawer without dropping them inside the machine
- Assemble the detergent drawer after drying it using a towel or dry cloth Do not wash your detergent drawer in dishwasher.
LIQUID DETERGENT APPARATUS
Take out the liquid detergent level apparatus for cleaning and maintenance purposes as shown in the picture and clean well detergent residues. Put the apparatus back into its place. Make sure no residues are left inside.
31
Page 33
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
X. FLUSH STOPPER / BODY / DRUM
Flush stopper
Disassemble the detergent drawer. Disassemble the flush stopper and clean the softener residues completely. Refit the flush stopper after cleaning it. Check whether it has settled properly.
Body
Clean the outer body of your machine with warm water and a non-inflammable cleaning agent that will not abrade the body of your machine. After rinsing with some water, dry it using a soft and dry cloth.
Drum
Do not leave metallic objects such as needles, paper clips, coins etc. in your machine. This objects lead to formation of rust stains in the drum. To clean such rust stains, use a non-chlorine cleaning agent and follow the instructions of manufacturers of the cleaning agent. Never use wire wool or similar hard objects for cleaning rust stains.
32
Page 34
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
FAULT
POSSIBLE CAUSE
TROUBLESHOOTING
Your machine does not start.
It is not plugged.
Plug machine in.
Fuses out of order.
Replace the fuses.
Electricity cut-off.
Check mains power.
Start/Pause button not pressed.
Press on Start/ Pause button.
Programme dial ‘stop’
position.
Switch the programme button to the desired position.
The machine door is not completely closed.
Close the machine door.
Your machine does not intake water.
Water tap is turned off.
Turn your faucet on.
Water inlet hose may be twisted.
Check water inlet hose and untwist.
Water inlet hose clogged.
Clean water inlet hose filters.
Valve inlet filter clogged.
Clean the valve inlet filters.
The machine door not completely closed.
Close the machine door.
Your machine does not discharge water.
Discharging hose clogged or twisted.
Check the discharging hose, then either clean or untwist.
Pump filter clogged.
Clean the pump filter.
Laundries settled in the machine non­homogeneously.
Spread your laundry in the machine evenly.
XI. TROUBLESHOOTING
All repairing operations required for your machine should be carried out by our authorised service. If your machine requires a repair or if you cannot remove the fault by the help of the information provided as follows:
• Unplug your machine.
• Turn the water faucet off.
33
Page 35
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
FAULT
POSSIBLE CAUSE
TROUBLESHOOTING
Your machine vibrates.
The feet of your machine have not been adjusted.
Adjust the feet on your machine.
Safety stays fitted for transportation not disassembled.
Disassemble the safety stays of your machine.
Less amount of laundry in the appliance.
This will not block operation of your machine.
Your machine is over- loaded with laundry or laundry settled unevenly.
Do not put in laundry more than the amount recommended and settle the laundry in the machine evenly
Your machine rests on a hard surface.
Prevent your machine from resting on hard surfaces.
Excessive foam is formed in the detergent drawer.
Excessive amount of detergent used.
Press on Start/Pause button. To eliminate foam formation, mix a spoon of softener with half litres of water, and pour the mixture in the detergent drawer. After 5-10 minutes, Press on Start/ Pause button again. In your next washing opera- tion, Adjust the detergent dose accordingly.
Wrong detergent used.
Use detergents produced only for automatic washing machines in your machine.
34
Page 36
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
FAULT
POSSIBLE CAUSE
TROUBLESHOOTING
Unsatisfactory washing result.
The contamination degree of your laundries does not match the programme you have chosen.
Select the programme appropriate for the contamination degree of your laundries. (See programme table)
Amount of detergent used insufficient.
Adjust the amount of detergent based on the amount and contamination degree of your laundries.
Laundries in excess of maximum capacity put in your machine.
Load your machine with laundries, amount of which will not exceed maximum laundry capacity.
Unsatisfactory washing result.
Water being hard.
( Contaminated, lime water etc.)
Adjust the amount of detergent based on the instruction of detergent manufacturer.
Laundries distributed in your machine non- homogenously.
Spread your laundries in the machine properly and homogeneously.
As soon as the ma­chine is loaded with water, water dis­charges.
The end of water discharging hose is too low for the machine.
Set the water discharging hose on appropriate height.
No water appears in the drum during washing.
No fault. Water is in the unseen part of the drum.
Laundries have detergent residues on them.
Non-dissolving particles of some detergents may stick to your laundries as white spots.
Perform an Extra rinse by setting your machine to “Rinsing” programme, or clean the spots using a brush after your laundries dry.
Grey spots appear on the laundries.
The reason for such spots may be oil, cream or ointment.
Apply the maximum amount of detergent instructed by the detergent manufacturer in the next washing operation.
35
Page 37
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
Spinning operation is not performed or runs late.
No fault. Unbalanced load control system has been activated.
Unbalanced load control system will try to spread your laundries homogenously. Spinning operation will begin after your laundry is spread. Place the laundry in the machine in a balanced fashion the next time.
TROUBLE CODE
POSSIBLE FAULT
WHAT TO DO
The door of your machine is left open
Close the machine door. If your machine persists to indicate fault, turn off your machine, unplug it and contact the nearest authorised service immediately.
The water pressure or the water level inside the machine is low
Turn on the faucet. Mains water may be cut-off. If the problem still continues, your machine will stop after a while automatically. Unplug the machine, turn off your faucet and contact the nearest authorised service.
The pump is faulty or pump filter is clogged or electrical connection of the pump is faulty
Clean the pump filter. If the problem persists, contact the nearest authorised service.
Your machine has excessive amount of water
Your machine will discharge water by itself. Pursuant to discharging operation, turn off your machine and unplug it. Turn off your faucet and contact the nearest authorised service.
XII. AUTOMATIC FAULT WARNINGS AND WHAT TO BE DONE
Your machine is equipped with the systems which are capable of both taking necessary precautions and warning you in case of any breakdown by means of continuous self-check-ing during washing operations.
36
Page 38
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
XIII. PRACTICAL INFORMATION
Alcoholic drinks: Spotted area should initially be washed using cold water, and then be
wiped with glycerine and water and rinsed with vinegar-mixed water. Shoe shine: Spot should be rubbed out gently without damaging the cloth and be scrubbed and rinsed with detergent. If not removed, it should be scrubbed using the mixture obtained by adding 1 scale of alcohol (96˚) into 2 scales of water, and then be washed with warm water. Tea and coffee: Stretch the spotted area of your laundry throughout the openning of a vessel, and pour hot water as much as the type of your laundry can resist. In case the type of your laundry permits, wash with bleacher. Chocolate and cocoa: After submerging your laundries in cold water and rubbing it using soap or detergent, wash it in tempera- ture that fabric type of your laundry can resist. In case the oil stain is still visible, wipe with oxygen water (3%). Tomato paste: After rubbing out the dried substances without damaging your laundry, submerge it in water for 30 minutes, and then scrub and wash it with detergent. Bouillon-Egg: Remove dried spot residues on your laundry, and then wipe it with a sponge or soft cloth submerged in cold water previously. Scrub with detergent, wash with diluted bleacher. Grease and oil stains: Firstly, wie the residues. Scrub the spot with detergent and wash it with warm soapy water. Mustard: Apply glycerine on spotted area. Scrub with detergent and wash. If the spot cannot be removed, wipe with alcohol. (For synthetic and colour fabrics, a mixture of 1 scale of alcohol and 2 scales of water should be used. Fruit: Stretch the spotted area of your laundry throughout the opening of a vessel, and pour cold water on it. Do not pour hot water on the spot. Wipe with cold water and apply glycerine. Allow 1-2 hours, wipe with a few drops of white vinegar, and rinse it. Grass stain: Wipe the stained part with detergent. If the type of your cloth permits bleacher using, wash with bleacher. Wipe your woollen laundries with alcohol. (For colour fabrics, a mixture of 1 scale of pure alcohol and 2 scales of water) Oil paint: Spot should be removed by applying thinner before drying. Then it should be wiped with detergent and washed. Burn stain: If your laundry is suitable for applying bleacher, you can add bleacher into washing water. For wool fabric, a cloth previously submerged in oxygen water should be covered over the stain and it should be ironed after putting a dry cloth on this cloth. It should be washed after being rinsed properly. Blood stain: Submerge your laundries in cold water for 30 minutes. If the stain is not removed, then submerge in a mixture of water and ammoniac (3 spoons of ammoniac in 4 litres of water) for 30 minutes.
37
Page 39
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
Crema, ice cream and milk: Submerge your laundries in cold water and scrub the spotted area
with detergent. If the spot is not removed, apply bleacher to the extent suitable for your laundries. (Do not use bleacher for colour laundries.) Mould: Mould stains should be cleaned as soon as possible. Stain should be washed with detergent water, nevertheless if it cannot be removed, it should be wipped with oxiygen water (3%). Ink: Subject the spotted area to running water and wait until the flow of inked water ends. Then wipe it with lemon-added water and detergent, and wash it after allowing 5 minutes.
38
Page 40
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
Environment friendly disposal
You can help protect the environment! Please remember to respect the local regulations: hand in the non-working electrical equipment’s to an appropriate waste disposal center.
HEINNER is a registered trademark of Network One Distribution SRL. Other brands and product
names are trademarks or registered trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from NETWORK ONE DISTRIBUTION.
Copyright © 2013 Network One Distibution. All rights reserved.
www.heinner.com, http://www.nod.ro http://www.heinner.com, http://www.nod.ro
Importer: Network One Distribution Marcel Iancu Street, 3-5, Bucharest, Romania Tel: +40 21 211 18 56, www.heinner.com , www.nod.ro
This product is in conformity with norms and standards of European Community
39
Page 41
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
MASINA DE SPALAT AUTOMATA
Model: HWM-V8214A++
Masina de spalat automata
Capacitate: 8 kg
1200 rpm
Clasa energetica: A++
40
Page 42
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
Vă mulțumim pentru alegerea acestui produs!
I. INTRODUCERE
Înainte de a utiliza acest aparat, citiți cu atenție manualul de instrucțiuni și păstrați-l pentru consultări ulterioare.
Acest manual este conceput pentru a vă oferi toate instrucţiunile necesare referitoare la instalarea, utilizarea şi întreţinerea aparatului. Pentru utilizarea corectă şi în siguranţă a aparatului, vă rugam să citiţi cu atenţie acest manual de instrucţiuni, înainte de instalare şi utilizare.
II. CONȚINUTUL PACHETULUI DUMNEAVOASTRĂ
Maşina de spălat rufe Manual de utilizare Certificat de garanție
41
Page 43
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
III. MĂSURI DE SIGURANȚĂ
1. Maşina este proiectată pentru uz casnic. Utilizarea comercială va
cauza ca garanţia să fie anulată.
2. Ţineţi-vă animalele departe de maşină.
3. Înainte de montare, vă rugăm să verificaţi materialul de ambalaj al
maşinii, şi suprafaţa exterioară a acestuia dacă este deschisă. Nu
utilizaţi maşini avariate sau maşini cu ambalajul deschis.
4. Maşina dumneavoastră trebuie să fie montată de către un service
autorizat. Orice interferenţă la maşina dumneavoastră efectuată de
către altcineva decât service-ul autorizat va cauza ca garanţia să fie
anulată.
5. Acest produs nu este destinat utilizării de către persoane (inclusiv
copii) cu capacităţi fizice, senzoriale sau mentale reduse, sau lipsă de
experienţă şi cunoştinţe, cu condiţia să fie supravegheaţi sau instruiţi
cu privire la utilizarea în siguranţă a produsului şi la pericolele
asociate cu acesta. Copiii trebuie supravegheaţi pentru a nu se juca
cu aparatul.
6. Utilizaţi maşina doar pentru rufe care sunt specificate pentru a fi
spălate de către producător.
7. Înainte de utilizarea maşinii de spălat, scoateţi cele 4 şuruburi de
transport şi despărţitoarele de cauciuc din spatele maşinii. Dacă
şuruburile nu sunt scoase, acestea pot cauza vibraţii, zgomot şi
defecţiunea produsului (garanţia fiind anulată).
8. Maşina dumneavoastră nu este acoperită de garanţie pentru
defectele cauzate de orice fel de factori externi (pesticide, incendiu,
etc.).
9. Vă rugăm să nu aruncaţi acest manual de utilizare; menţineţi-l pentru
utilizare ulterioară. Dumneavoastră sau altcineva va avea nevoie de el
în viitor.
10. Reţineţi: Specificaţiile tehnice pot varia depinzând de produsul
achiziţionat.
11. Temperatura ambientală necesară pentru funcţionarea ideală a
maşinii este de 15-25°.
12. Furtunurile îngheţate se pot rupe şi exploda. În regiuni unde
temperatura este sub zero grade, temperatura ambientală poate
dăuna operaţiunii în siguranţă a cardului electronic.
13. Asiguraţi-vă că articolele dumneavoastră de îmbrăcăminte pe care le
plasaţi în maşină nu conţin substanţe străine (cuie, ace, monede,
brichetă, chibrituri, agrafe, etc) în buzunarele lor. Aceste materiale
străine pot avaria maşina.
14. Înainte de utilizarea maşinii, dumneavoastră trebuie să apelaţi la cel
mai apropiat service autorizaţi şi să solicitaţi un ajutor netaxabil
pentru montarea, funcţionarea şi utilizarea maşinii.
15. Este recomandat să efectuaţi prima operaţiune de spălare utilizând
programul Bumbac 90˚ C şi fără rufe prin introducerea a unei
jumătăţi de cantităţi de detergent în al doilea compartiment din
sertarul detergentului.
42
Page 44
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
16. Deoarece detergentul şi balsamul este expus la aer pentru o perioadă
lungă de timp acesta poate produce reziduuri, introduceţi detergentul
sau balsamul în sertarul pentru detergent la începerea fiecărei spălări.
17. Dacă nu utilizaţi maşina pentru o perioadă lungă de timp, este sfătuit
să scoateţi maşina din priză şi să închideţi robinetul de admisie. De
asemenea, lăsarea uşii maşinii închise va preveni formarea de mirosuri
urâte datorită umidităţii.
18. Datorită procedurilor de control al calităţii, o cantitate mică de apă ar
putea să rămână în maşina dumneavoastră după testele făcute. Acest
lucru nu va avaria maşina.
19. Reţineţi că materialele pentru ambalarea maşinii pot fi periculoase
pentru copii.
20. Menţineţi materialele de ambalare în locuri unde copii nu pot ajunge
sau eliminaţi-le corespunzător.
21. Utilizaţi programele de pre-spălare doar pentru rufe foarte murdare.
22. Nu deschideţi niciodată sertarul de detergent atunci când maşina
funcţionează.
23. În cazul stricării, prima dată decuplaţi produsul şi apoi închideţi
robinetul. Nu încercaţi să o reparaţi singur, contactaţi întotdeauna
service-ul autorizat pentru sfaturi.
24. Cantitatea de rufe pe care o introduceţi în maşina de spălat nu trebuie
să depăşească cantitatea maximă indicate.
25. Nu forţaţi deschiderea uşii atunci când maşina funcţionează.
26. Spălarea articolelor de îmbrăcăminte cu făină avariază maşina. Nu
spălaţi haine murdare de făină în maşină.
Dumneavoastră trebuie să citiţi aceste avertismente. Dumneavoastră vă puteţi proteja şi apropiaţii dumneavoastră împotriva vătămărilor grave şi riscurilor.
PERICOL DE ARSURI!
Nu atingeţi furtunul de evacuare şi apa în timpul evacuării deoarece produsul poate atinge temperaturi ridicate în momentul funcţionării.
43
Page 45
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
RISC DE DECES CAUZAT DE CURENTUL ELECTRIC!
1. Nu utilizaţi prize multiple sau prelungitor
2. Nu puneţi în prize de perete avariate
3. Atunci când scoateţi din cablu, nu trageţi de cablu - apucaţi întotdeauna de ştecher.
4. Nu introduceţi sau trageţi din ştecher din priză cu mâinile ude pentru a preveni
eletrocutarea!
5. Nu atingeţi niciodată maşina cu mâinile sau picioarele umede.
6. Sunaţi la cel mai apropiat service autorizat pentru înlocuire dacă cablul de alimentare
este deteriorat.
RISC DE INUNDARE!
1. Verificaţi dacă apa curge rapid sau nu înainte de plasarea furtunului de evacuare în
chiuvetă.
2. Luaţi măsurile necesare pentru a preveni alunecarea furtunului.
3. Forţa de berbec a furtunului care nu este plasată apropiat poate arunca furtunul.
Preveniţi opritorul din interiorul chiuvetei să blocheze gura de evacuare a acesteia.
44
Page 46
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
PERICOL DE INCENDIU!
1. Nu menţineţi lichide inflamabile lângă maşina dumneavoastră.
2. Conţinutul sulfuros al diluanţilor poate cauza coroziunea. Din acest motiv, nu utilizaţi
materiale de eliminare a vopselei în maşina dumneavoastră.
3. Nu utilizaţi niciodată produse care conţin material solvent (cum ar fi gaz de spălare) în
maşină.
4. Scoateţi toate obiectele din buzunarele rufelor (ac, agrafă, brichetă, chibrite, etc) în
momentul introducerii în maşină.
Riscul de incendiu şi de explozie poate apărea.
PERICOL DE CADERE SI VATAMARE!
1. Nu vă urcaţi pe maşină. Blatul superior al maşinii se poate rupe şi dumneavoastră vă
puteţi vătăma.
2. În timpul instalării, rulaţi furtunul, cablul şi ambalajul maşinii. Vă puteţi împiedica şi
cădea.
3. Nu răsuciţi maşina, sau pe o parte.
4. Nu ridicaţi maşina prin menţinerea acesteia de componentele extrudate (sertarul de
detergent, uşă). Aceste componente se pot rupe şi vă pot cauza vătămări.
5. Există un risc de împiedicare şi vătămare dacă materiale cum ar fi furtun şi cabluri nu
sunt depozitate corespunzător după ce maşina este instalată.
Maşina trebuie să fie transportată de 2 sau mai multe persoane.
SIGURANTA PENTRU COPII!
1. Nu lăsaţi copiii nesupravegheaţi lângă maşină. Copiii se pot bloca în maşină iar riscul
de deces poate survine.
2. Sticla uşii şi suprafaţa pot fi foarte fierbinţi atunci când maşina funcţionează. În special
atingerea maşinii poate dărui avarii asupra pielii copilului.
3. Menţineţi materialele de ambalare departe de copii.
4. Otrăvirea poate apărea dacă detergentul şi materialele de întreţinere sunt consumate,
şi ochii sau pielea poate fi iritată dacă vin în contact cu pielea. Menţineţi materialele de curăţare departe de copii.
INFORMATII PENTRU ECONOMISIRE
Unele informaţii importante pentru a vă îmbunătăţi eficienţa maşinii dumneavoastră: Cantitatea de rufe pe care o introduceţi în maşina de spălat nu trebuie să depăşească cantitatea maximă indicată. Prin acest lucru, maşina dumneavoastră va funcţiona în modul de economisire.Neutilizarea funcţiei de prespălare pentru rufe cu grad mic şi normal de murdărire va economisi electricitate şi apă.
45
Page 47
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
VI. DESCRIEREA PRODUSULUI
46
Page 48
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
Surub de siguranta in timpul transportului
Valva admisie apa
Furtun de evacuare
Cablu de alimentare
Surub de siguranta in timpul transportului
Surub de siguranta in timpul transportului
Surub de siguranta in timpul transportului
47
Page 49
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
SCOATEREA ŞURUBURILOR DE TRANSPORT
1. Înainte de utilizarea maşinii de spălat, scoateţi cele 4 şuruburi de transport şi
despărţitoarele de cauciuc din spatele maşinii. Dacă şuruburile nu sunt scoase, acestea
pot cauza vibraţii, zgomot şi defecţiunea produsului (garanţia fiind anulată).
2. Din acest motiv, şuruburile de transport vor fi slăbite prin rotirea în sensul invers al
acelor de ceasornic utilizând o cheie corespunzătoare.
3. Şuruburile de transport vor fi scoase prin tragerea lor.
4. Montaţi şuruburile de transport din plastic furnizate în punga de accesorii către
locurile unde şuruburile de transport au fost scoase.
5. Şuruburile de transport trebuie să fie depozitate pentru a fi utilizate în caz de
transport.
NOTĂ: Îndepărtaţi neapărat şuruburile de transport ale maşinii de spălat, înainte de prima utilizare. Avariile maşinilor ce au funcţionat cu şuruburile înăuntru nu fac obiectul garanţiei.
VIII. INSTALARE
48
Page 50
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
AJUSTAREA PICIOARELOR
Nu plasaţi produsul pe carpetă sau pardoselii care pot preveni ventilarea produsului. Pentru asigurarea unei funcţionări silenţioase şi fără vibraţii ale maşinii dumneavoastră, această trebuie să fie poziţionată pe un teren neaderent şi ferm. Puteţi regla echilibrul maşinii cu ajutorul picioruşelor. Slăbiţi piuliţa de reglare din plastic.
Ajustaţi poziţia picioruşelor în sus şi jos prin rotirea lor. După menţinerea echilibrului, comprimaţi din nou piuliţa din plastic. Niciodată nu puneţi carton, lemn sau materiale asemănătoare sub maşină dacă dumneavoastră doriţi să stabilizaţi distorsiunile pardoselii. Atunci când curăţaţi pardoseală, pe care maşina stă, fiţi atenţi să nu cauzaţi deteriorări la stabilizarea picioruşelor.
49
Page 51
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
CONEXIUNEA ELECTRICA
Maşina de spălat este setată la 220-240V şi 50Hz.
Cablul principal al maşinii de spălat este echipat cu un ştecher împământat
specific. Acest ştecher trebuie să fie întotdeauna introdus într-o priză cu împământare de 10 amperi.
Valoarea curentă a siguranţei trebuie să fie de 10 amperi. Valoarea curentă a
siguranţei pentru cablul de alimentare conectat la acest ştecher trebuie de
asemenea de 10 amperi.
Dacă nu aveţi o astfel de priză sau siguranţă conformă cu această, vă rugăm să o
aveţi montată de către un electrician calificat.
Nu ne asumam vina in caz de avarii care pot apărea datorită utilizării fără
împământare.
REŢINEŢI: Funcţionarea maşinii dumneavoastră sub tensiune scăzută va cauza ciclul de durată a maşinii să fie redus şi performanţele maşinii vor fi limitate.
CONEXIUNEA FURTUNULUI DE ADMISIE A APEI
Bazate pe specificaţiile sale, maşina dumneavoastră poate fi dotată cu o singură
admisie de apă (rece) sau o admisie de apă dublă (caldă/rece). Furtunul cu capac alb
trebuie să fie conectat la admisia de apă rece şi furtunul cu capac roşu trebuie să fie
conectat la admisia de apă caldă (aplicabile pentru maşinile cu admisie dublă de apă).
Pentru eliminarea scurgerilor de apă de la punctele de contact, piuliţele 1 sau 2 sunt
furnizate în ambalajul furtunului (aplicabile pentru maşinile cu admisie dublă de apă).
Montaţi aceste piuliţe pe capetele noilor furtunuri de admisie a apei pe partea
robinetului.
Montaţi noile furtunuri de admisie pe un robinet cu filet de ¾ ˝. Conectaţi cotul alb al capătului furtunurilor de admisie a apei la valva albă de admisie a
apei în partea din spate a maşinii şi cotul roşu al capătului furtunului roşu (aplicabil
pentru maşinile cu admisie dublă de apă). Strângeţi manual componentele din plastic
la îmbinări. În condiţii nesigure, verificaţi lucrările de conectare efectuate cu ajutorul
unui instalator calificat.
Debitul apei cu o presiune de 0,1-1 Mpa va permite maşinii să funcţioneze mai
eficient.) (Presiune de 0,1 Mpa înseamnă că mai mult de 8 litri de apă vor curge
printr-un robinet deschis într-o perioadă de un minut.)
Asiguraţi-vă că punctele de contact nu picură prin oprirea robinetului complet după
efectuarea conexiunilor.
Asiguraţi-vă că noile furtunuri de admisie sunt cotite, stricate, deformate şi
redimensionate.
Dacă maşina dumneavoastră este dotată cu admisie caldă de apă, temperatura apei
calde trebuie să fie de maxim 70°C.
3/4”
3/4”
50
Page 52
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
Notă: Utilizaţi doar furtunul nou de alimentare cu apă ce este livrat odată cu maşina în timp ce faceţi conexiunile de admisie ale maşinii. Nu utilizaţi niciodată furtunuri de admisie a apei vechi, utilizate sau deteriorate.
CONEXIUNEA DE EVACUARE A APEI
Capătul furtunului de evacuare a apei poate fi montat pe un aparat direct ataşat la
furtunul de evacuare a apei sau îmbinarea exterioară a cotului bazinului.
Nu încercaţi să extindeţi furtunul de evacuare a apei prin înnădire. Nu introduceţi furtunul de evacuare într-un recipient, găleată sau chiuvetă. Asiguraţi-vă că furtunul de evacuare nu este cotit, îndoit, apăsat sau extins. Vă rugăm
să reţineţi: furtunul de evacuare trebuie să fie montat la o înălţime de maxim 100 cm
de la podea.
~ 95 cm
~ 145 cm
~ 140 cm
~ 95 cm
95 cm
150 cm
51
Page 53
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
IX. PANOU DE CONTROL
Atunci când doriţi să spălaţi rufele cu detergent lichid, dumneavoastră puteţi utiliza mostra de determinare a nivelului de lichid. Dumneavoastră puteţi utiliza detergenţi lichid în toate programele fără prespălare. Plasaţi aparatura detergentului lichid în al doi- lea compartiment (ce este disponibil în interiorul maşinii) în sertarul de detergent şi setaţi cantitatea de detergent. (Utilizaţi cantitatea de detergent lichid recomandată de către producătorii de detergent). Nu depăşiţi nivelul MAX, utilizaţi doar detergent lichid, nu utilizaţi acestă aparatură pentru detergentul pudră şi îndepărtaţi-l.)
52
Page 54
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
Compartiment detergent spălare principală:
În acest compartiment, doar materia- lele cum ar fi detergentul (lichid sau pudră), soluţie anticalcar pot fi utilizate. La prima instalare, dumneavoastră puteţi găsit această apa- ratură pentru detergent lichid în interiorul maşinii.
Balsam de material, amidon, compartiment de detergent:
Dumneavoastră puteţi utiliza balsam pentru rufe (cantitatea şi tipul este recomandat de către producător). Câteodată balsamurile de material pe care utilizaţi pe rufe pot rămâne în acest compartiment. Motivul pentru acest lucru este că balsamul nu este vâscos. Pentru prevenirea acestei situaţii, balsamuri lichide mai vâscoase sunt recomandate de a fi utilizate sau balsamul trebuie să fie diluat şi apoi utilizat.
Compartiment detergent lichid
Compartiment detergent spalare principala
Balsam
Compartiment detergent pentru prespalare
Niveluri pentru detergent pudra
Mostra detergent pudra
53
Page 55
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
Compartiment detergent pentru prespălare:
Acest compartiment trebuie să fie utilizat în momentul când caracteristica de prespălare este selectată. Functia de prespălare este recomandată pentru rufe cu grad mărit de murdărire.
54
Page 56
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
Dumneavoastră puteţi selecta programul pe care-l doriţi să-l utilizaţi pentru a vă spăla lenjeria cu ajutorul butonului de program.
Puteţi seta funcţionarea selectării programului prin rotirea în ambele părţi a butonului de
program. Asiguraţi-vă că butonul de program se află exact pe programul pe care-l doriţi să-l selectaţi.
IX. BUTONUL DE PROGRAM
Cotton 60˚C
Cotton 40˚C
Eco 20˚C
Sinthetic 40˚C
Wool
Rinse
55
Page 57
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
Pe panoul de afişaj, dumneavoastră puteţi vedea cronometrul de întârziere a spălării maşinii, selectarea de temperatură, funcţiile suplimentare pe care le-aţi selectat şi stagiul programului care funcţionează în prezent ( stagiu de prespălare/spălare, stagiu de clătire, stagiu de stoarcere). Suplimentar, afişajul electronic vă va avertiza prin intermedi- ul simbolurilor de defecţiuni pe afişaj atunci când o defecţiune survine la maşină şi vă va anunţa în momentul finalizării programului de spălare prin furnizarea expresiei ”FINALIZARE” pe afişaj cât de rapid programul de spălare pe care l-aţi selectat s-a finalizat.
X. AFIŞAJ ELECTRONIC
56
Page 58
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
SEPARAREA RUFELOR
Îmbrăcămintea conţine etichete pe acestea care specifică specificaţiile acestora
Spălarea sau uscarea rufelor dumneavoastră conform cu specificaţiile din eticheta
produsului.
Separaţi îmbrăcămintea conform tipurilor (bumbac, sintetic, sensibile, lână etc.),
temperaturile lor (rece, 30°, 40°, 60°, 90°) şi gradele de murdărire (puţin murdare,
murdare, murdare ridicat).
Nu spălaţi niciodată rufele albe şi cele colorate împreună. Spălaţi îmbrăcămintea colorată separat în prima spălare deoarece se pot decolora. Asiguraţi-vă că nu sunt materiale metalice în îmbrăcăminte sau în buzunare; dacă sunt,
scoateţi-le.
AVERTISMENT: Defecţiunile vor surveni în cazul penetrărilor substanţelor străine în
maşină şi nu sunt incluse în garanţie.
Trageţi fermoarul şi încheiaţi nasturii hainelor. Scoateţi inelele de prindere din metal sau din plastic ale perdelelor din tul sau
draperiilor sau plasaţi-le într-o pungă de spălare şi apoi strângeţi-le.
Inversaţi materialele textile cum ar fi pantalonii, tricotajele, tricourile şi puloverele. Spălaţi şosetele, batistele sau rufe mici în plasa de spălare.
IX. UTILIZAREA MASINII
57
Page 59
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
58
Page 60
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
INTRODUCEREA RUFELOR ÎN MAŞINĂ
Deschideţi uşa maşinii. Distribuiţi rufele în maşină.
Notă: Capacitatea maximă de încărcare poate varia fiind bazată pe tipul rufelor pe care le veţi spăla, gradul de contaminare şi programul pe care l-aţi ales. Nu depăşiţi capacitatea maximă de încărcare indicată în tabelul pentru programele de spălare.
Puteţi utiliza următorul tabel de greutăţi ca exemplu:
Tip de rufe
Greutate (gr)
Prosop
200
In
500
Halat de baie
1200
Cuvertura matlasata
700
Fata de perna
200
Lenjerie intima
100
Fata de masa
250
Introduceţi fiecare articol separat. Asiguraţi-vă rufele nu se lipesc între protecţie şi garnitura inferioară în momentul
când închideţi uşa.
Împingeţi uşa maşinii până când auziţi un zgomot de blocare pentru a o închide. Închideţi corespunzător uşa maşinii, în caz contrar maşina nu va porni operaţiunea
de spălare.
59
Page 61
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
ADĂUGAREA DETERGENTULUI ÎN MAŞINĂ
Cantitatea de detergent pe care o introduceţi în maşină va depinde de următoarele criterii:
• Utilizarea detergentului va fi bazată pe gradul de murdărire a rufelor dum- neavoastră.
Nu prespălaţi rufele cu grad mic de murdărire şi introduceţi o cantitate mică de detergent
în cel de-al doilea compartiment al sertarului de detergent.
• Pentru rufele murdare, selectaţi un program incluzând prespălarea, şi introduceţi ¼ din
detergent pe care o veţi introduce în sertarul pentru detergent în primul compartiment în timp ce introduceţi cantitatea rămasă în al doilea compartiment.
• Utilizaţi detergenţi produşi pentru maşini automate de spălat în maşina dvs. Cantitatea
de detergent pe care o folosiţi pentru rufele dvs este mentionata pe ambalajul
detergentului.
• Cu cât gradul de duritate a apei este mai mare, o cantitate de detergent se va folosi.
• Cantitatea de detergent pe care dumneavoastră o veţi folosi va creşte dacă cantitatea de
rufe creşte.
• Introduceţi balsam în compartimentul de balsam aflat în sertarul de deter- gent. Nu
treceţi de nivelul MAX. În caz contrar, balsamul va curge în apa de spălare prin
intermediul curgerii.
• Balsamurile cu densitare ridicate sunt necesare pentru a fi diluate la un grad înainte de a
fi introduse în sertar. Deoarece balsamurile cu densitate ridicată vor înfunda debitul şi evita mişcarea acestuia.
• Dumneavoastră puteţi utiliza detergenţi lichid în toate programele fără prespălare.
Pentru acest lucru, introduceţi placa de nivel a detergentului lichid din trusa de accesorii sau aparatul detergentului lichid în al doilea compartiment al sertarului de detergent şi setaţi cantitatea de detergent lichid conform cu nivelele de pe această placă. Reţineţi să scoateţi placa detergentului lichid.
60
Page 62
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
UTILIZAREA MAŞINII
1. Conectaţi maşina.
2. Deschideţi robinetul de apă.
3. Deschideţi uşa maşinii.
4. Distribuiţi rufele în maşină.
5. Împingeţi uşa maşinii până când auziţi un zgomot de blocare pentru a o închide.
SELECTAREA PROGRAMULUI
Selectaţi programele corespunzătoare pentru rufele dvs din tabelul de program.
FUNCŢII AUXILIARE
1. Înainte de pornirea programului, dumneavoastră puteţi selecta o funcţie auxiliară.
2. Apăsaţi butonul funcţiei auxiliare pe care o doriţi să selectaţi.
3. Dacă simbolul funcţiei auxiliare de pe afişajul electronic clipeşte în mod continuu,
funcţia auxiliară pe care aţi selectat-o va fi activată.
4. Dacă simbolul funcţiei auxiliare de pe afişajul electronic clipeşte, funcţia auxiliară pe
care aţi selectat-o nu va fi activată.
MOTIV PENTRU NEACTIVARE:
1. Funcţia auxiliară pe care doriţi să le utilizaţi în programul de spălare pe care
dumneavoastră l-aţi selectat nu este aplicabilă.
2. Maşina a trecut de etapă, în timpul funcţiei auxiliare pe care aţi selectat-o să fie
implementată.
3. Dacă nu este compatibilă cu o funcţie auxiliare pe care aţi selectat-o anterior.
SISTEM DE DETECTARE ÎNCĂRCARE PE JUMĂTATE
Maşina dumneavoastră este prevăzută cu un sistem de detectare a încărcării pe jumătate. În cazul în care exista jumătate sau mai puţin de jumătate din cantitatea de rufe, maşina dumneavoastră va economisi apa de spălare, consumul de apă şi energie în unele programe. În momentul când funcţia încărcare pe jumătate este activă, maşina poate finaliza programul pe care l-aţi ales într-un timp mai scurt.
61
Page 63
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
1. FUNCTIE START INTARZIAT
Prin utilizarea acestei funcţii auxiliare, dumneavoastră puteţi seta maşina să înceapă operaţia de spălare cu întârzieri între ”3h, 6h, 9h, 12h”.
Pentru utilizarea funcţiei auxiliare ca cronometru de întârziere:
Apăsaţi o singură dată butonul de întârziere.
- Led-ul de “3 h” va apărea.
- Apăsaţi pe butonul de întârziere până când timpul la care doriţi operaţiunea de spălare să înceapă.
- Pentru activarea întârzierii timpului pe care aţi selectat-o în program, dumneavoastră va
trebui să apăsaţi pe orice alt buton auxiliar pe care doriţi cu excepţia butonului “Start/Aşteptare” .
2. SELECTAREA VITEZEI DE CENTRIFUGARE
Puteți ajusta viteza de centrifugare cu ajutorul butonului pentru setarea vitezei de centrifugare. Atunci când selectați un program nou, viteza maximă de centrifugare a programului selectat va fi afișată pe panou. Cu ajutorul butonului pentru selectarea vitezei, puteți modifica viteza de centrifugare. Dacă ați trecut peste viteza de centrifugare pe care doriti sa o setati, puteti relua setarea vitezei prin mentinerea apasata a butonului.
Buton 2
funcție
Pornire intarziata
Daca ati trecut de functia de iontarziere a timpului pe care o doriti sa o setati, puteti recomuta la rotatie prin mentinerea butonului de setare a rotatiei apasat. Daca doriti sa anulati functia de intarziere, trebuie sa apasati o data, iar simbolul nu va clipi pe afisajul electronic.
62
Page 64
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
FARA CENTRIFUGARE (*optional)
Dacă nu doriţi să efectuaţi centrifugare asupra rufelor, puteţi utiliza această funcţie auxiliară. Prin apăsarea butonului fără centrifugare, simbolul atunci când lumina led-ului
simbolului se aprinde.
3. ANTI-ALERGICE (*optional)
În programele unde această funcţie auxiliară este activă, maşina dumneavoastră va efectua o operaţiune suplimentară de clătire a rufelor înainte de utima operaţiune de clătire. Dumneavoastră puteţi activa programul prin apăsarea butonului funcţiei auxiliare de clătire suplimentară în momentul când led-ul roşu al simbolului se aprinde.
4. CALCARE USOARA
Prin activarea acestei funcţii auxiliare, dum- neavoastră puteţi permite rufelor să aibe mai puţine cute la finalizarea operaţiunii de spălare. Dumneavoastră puteţi activa programul prin apăsarea butonului funcţiei auxiliare de clătire suplimentară în momentul când led-ul roşu al simbolului se aprinde.
5. PRESPALARE (*optional)
Dumneavoastră vă puteţi expune rufele cu grad mărit de murdărire la operaţiuni de prespălare înainte de spălarea principală prin utilizarea acestei funcţii suplimentare. În momentul când utilizaţi această funcţie, dumneavoastră trebuie să introduceţi detergent in compartimentul de prespalare al sertarului de detergent. Dumneavoastră puteţi activa programul prin apăsarea butonului funcţiei auxiliare de clătire suplimentară în momentul când led-ul roşu al simbolului se aprinde.
6. CLATIRE SUPLIMENTARA
Puteţi efectua operaţiuni suplimentare de clătire ale rufelor prin utilizarea acestei funcţii suplimentare. Puteti activa programul prin apasarea butonului functiei auxiliare de clatire suplimentara in momentul cand ledul rosu al simbolului se aprinde.
7. SPALARE LA RECE (*optional)
Dumneavoastră puteţi utiliza această funcţie auxiliară în momentul când spălaţi rufele utilizând apă rece (apă de la robinet).
Puteti active programul prin apasarea butonului functiei auxiliare de spalare la rece in momentul cand ledul rosu al simbolului se aprinde.
63
Page 65
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
8. SPALARE RAPIDA (*optional)
Prin utilizarea acestei funcţii auxiliare, dumneavoastră puteţi spăla rufele într-o perioadă mai scurtă de timp şi să consumaţi mai puţină energie şi apă. (Este avizat că rufele care reprezintă o cantitate mai puţină din programul de spălare selectat să fie introdus). Dumneavoastră puteţi activa programul prin apăsarea butonului funcţiei auxiliare de clătire suplimentară în momentul când led-ul roşu al simbolului se aprinde.
NOTA: In cazul in care introduceti jumatate sau mai putin de jumatate din capacitatea de spalare a programului pe care dumneavoastra l-ati selectat in masina, aceasta va detecta datorita sistemului acest lucru si programul pe care l-ati selectat va spala rufele intr-un timp mai scurt pentru a consuma mai putina apa si energie. In momentul cand masina detecteaza jumatate de incarcare, ledul simbolului se va aprinde automat.
9. BUTON PORNIRE / PAUZA
Prin apăsarea butonului Pornire/Pauză, dumneavoastră puteţi porni programul pe care l-aţi selectat sau suspenda programul care funcţionează. Dacă comutaţi maşina în modul standby, ledul Start/Standby de pe afişajul electronic va clipi.
SISTEM DE BLOCARE PENTRU COPII
Blocarea pentru copii este disponibila pentru a nu afecta programul atunci cand butoanele
sunt apăsate sau butonul programului este pornit în momentul efectuării operaţiunii de spălare. Blocarea pentru copii va fi activată în cazul apăsării pe ambele funcţii auxiliare 1
şi 2 în acelaşi timp pentru mai mult de 3 secunde. În momentul activării, puteţi vedea led-urile funcţiilor auxiliare pe afişaj.
Dacă apăsaţi orice buton în momentul când blocarea pentru copii este activă, led-urile funcţiei suplimentare vor clipi pe afişaj. În timp ce funcţia de blocare pentru copii este activă şi programul funcţionează, butonul de program se află în poziţia ANULARE şi un alt program este selectat, programul selectat anterior îşi va rezuma funcţia de unde s-a oprit. Pentru a-l dezactiva, este suficient să apăsaţi pe aceleaşi butoane timp de 3 secunde. Atunci când blocarea pentru copii este dezactivată, led-urile funcţiilor suplimentare vor clipi pe afişaj.
64
Page 66
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
ANULAREA PROGRAMULUI Dacă doriţi să anulaţi orice program în timpul funcţionării:
Comutaţi butonul programului în poziţia ”ANULARE”. Maşina dumneavoastră va opri operaţia de spălare şi programul se va anula. Pentru a evacua apa acumulată în maşină, comutaţi butonul programului la orice alt
program.
Maşina va efectua operaţiunile de evacuare necesare şi anula programul. Dumneavoastră puteţi rula maşina prin selectarea a unui nou program.
FINALIZAREA PROGRAMULUI
Maşina se va opri atât timp cât programul pe care l-aţi selectat se finalizează. Led-ul de finalizare va clipi pe panoul de afişaj.
Puteţi deschide uşa maşinii şi scoate rufele.
Lăsaţi uşa maşinii deschisă pentru a permite componentelor interne ale maşinii să
se usuce după scoaterea rufelor.
Comutaţi butonul programului în poziţia ANULARE.
Decuplaţi maşina.
Opriţi robinetul de apă.
65
Page 67
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
Bumbac 90°
Temperatura de spalare
90
Capacitate maxima de rufe uscate
8,0
Compartiment pentru detergent
2
Durata program (Min)
187
Tip de rufe / Descriere
Foarte murdare, bumbac şi textile din blană artificială. (Lenjerie intimă, in, faţă de masă, prosop
(maxim 34,0 kg), pijamale, etc.
Bumbac prespalare
Temperatura de spalare
60
Capacitate maxima de rufe uscate
8,0
Compartiment pentru detergent
1&2
Durata program (Min)
164
Tip de rufe / Descriere
Bumbac murdar şi textile din blană artificială. (Lenjerie intimă, in, faţă de masă, prosop (maxim
4,0 kg), pijamale, etc.
Bumbac ECO 60°
Temperatura de spalare
60
Capacitate maxima de rufe uscate
8,0
Compartiment pentru detergent
2
Durata program (Min)
240
Tip de rufe / Descriere
Bumbac murdar şi textile din blană artificială. (Lenjerie intimă, in, faţă de masă, prosop (maxim
4,0 kg), pijamale, etc.
Bumbac 40°
Temperatura de spalare
40
Capacitate maxima de rufe uscate
8,0
Compartiment pentru detergent
2
Durata program (Min)
235
Tip de rufe / Descriere
Bumbac murdar şi textile din blană artificială. (Lenjerie intimă, in, faţă de masă, prosop (maxim
4,0 kg), pijamale, etc.
ECO 20°
Temperatura de spalare
20
Capacitate maxima de rufe uscate
4,0
Compartiment pentru detergent
2
Durata program (Min)
96
Tip de rufe / Descriere
Mai puţin murdar, bumbac şi textile din in. (L jerie intimă, in, faţă de masă, prosop (maxim 2 kg),
pijamale, etc.)
XIV. TABEL CU PROGRAME
66
Page 68
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
EASY CARE
Temperatura de spalare
40
Capacitate maxima de rufe uscate
3,5
Compartiment pentru detergent
2
Durata program (Min)
110
Tip de rufe / Descriere
Foarte murdare sau textile din amestec sinte
(Şosete din nailon, cămăşi, bluze, pantaloni
sintetici, etc).
LANA
Temperatura de spalare
30
Capacitate maxima de rufe uscate
2,5
Compartiment pentru detergent
2
Durata program (Min)
43
Tip de rufe / Descriere
Rufe din lână cu etichete de spălare la maşină.
CLATIRE
Temperatura de spalare
-
Capacitate maxima de rufe uscate
8,0
Compartiment pentru detergent
-
Durata program (Min)
42
Tip de rufe / Descriere
După finalizarea operaţiunii de clătire, dacă doriţi să clătiţi suplimentar rufele, dumneavoastră puteţi utiliza acest program pentru orice fel de rufă.
CENTRIFUGARE
Temperatura de spalare
-
Capacitate maxima de rufe uscate
8,0
Compartiment pentru detergent
-
Durata program (Min)
177
Tip de rufe / Descriere
După finalizarea operaţiunii de spălare, dacă doriţi să centrifugaţi suplimentar rufele,
dumneavoastră puteţi utiliza acest program pentru orice fel de rufe.
SENSIBILE / SPALARE MANUALA
Temperatura de spalare
30
Capacitate maxima de rufe uscate
2,5
Compartiment pentru detergent
2
Durata program (Min)
90
Tip de rufe / Descriere
Rufe recomandate pentru spălare manuală si rufe sensibile.
67
Page 69
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
IMBRACAMINTE SPORTIVA
Temperatura de spalare
30
Capacitate maxima de rufe uscate
3,5
Compartiment pentru detergent
2
Durata program (Min)
80
Tip de rufe / Descriere
Imbracaminte sportiva
AMESTECATE
Temperatura de spalare
30
Capacitate maxima de rufe uscate
3,5
Compartiment pentru detergent
2
Durata program (Min)
81
Tip de rufe / Descriere
Bumbac murdar, sintetice, colorate şi textile din blană artificiale pot fi spălate împreună.
BLUZE / CAMASI
Temperatura de spalare
60
Capacitate maxima de rufe uscate
4,0
Compartiment pentru detergent
2
Durata program (Min)
114
Tip de rufe / Descriere
Bumbac murdar, sintetice şi cămăşi din amestec sintetic şi bluze pot fi spălate împreună.
ZILNIC 60 min
Temperatura de spalare
60
Capacitate maxima de rufe uscate
4,0
Compartiment pentru detergent
2
Durata program (Min)
60
Tip de rufe / Descriere
Dumneavoastră puteţi spăla îmbrăcămintea din bumba murdară, colorată sau textile la 60°C în 60
minute.
RAPID 15 min
Temperatura de spalare
30
Capacitate maxima de rufe uscate
2,0
Compartiment pentru detergent
2
Durata program (Min)
15
Tip de rufe / Descriere
Dumneavoastră puteţi spăla rufele cu grad mic de murdărire, bumbacul, coloratele şi materialele textile din blană artificială în doar 15 minute.
REŢINEŢI: Deoarece în acest program, perioada de spălare este mică, o cantitate mai mică de detergent este necesară a fi utilizată în comparaţie cu celelalte programe. Perioada progra­mului va creşte dacă maşina detectează o încărcare neechilibrată. Dumneavoastră puteţi deschide uşa maşinii la 2 minute după finalizarea operaţiunii de spălare. (Durata de 2 minute necesară pentru deschiderea uşii maşinii nu este inclusă în perioada de spălare).
68
Page 70
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
AVERTISMENT!
Înainte de începerea operaţiunilor de întreţinere şi curăţare a maşinii, decuplaţi-o. Înainte de începerea operaţiunilor de întreţinere şi curăţare, închideţi robinetul.
AVERTISMENT: Componentele maşinii pot fi avariate dacă substanţe de curăţat cu agenţi solvenţi sunt utilizaţi. Nu utilizaţi materiale de curăţare cu agenţi solvenţi.
FILTRELE DE ADMISIE A APEI
Filtrele pentru evitarea murdăriilor şi substanţelor străine din apă de la penetrarea în maşină sunt disponibile ambele pe partea robinetului şi la capele valvelor de apă împreună cu furtunul de admisie a apei. Dacă maşina nu poate lua o cantitate suficientă de apă în ciuda deschiderii complete a robinetului, aceşti filtre trebuie să fie curăţaţi. (Este
recomandat să curăţaţi filtrul pompei o dată la fiecare 2 luni.)
1. Detaşaţi furtunurile de admisie a apei.
2. Scoateţi filtrele de pe valvele de admisie a apei cu ajutorul cleştilor şi apoi curăţaţi
cu o perie în apă.
3. Dezasamblaţi filtrele de pe partea robinetului a furtunurilor de admisie a apei
manual şi curăţaţi-le.
4. După ce filtrele au fost curăţate, puteţi să le montaţi invers.
AVERTISMENT:
Filtrele valvelor de admisie a apei pot fi înfundate datorită contaminării robinetului de apă sau lipsa întreţinerii necesare sau valvele pot fi stricate, cauzând scurgerea apei în maşină
în mod continuu. Aceste defecţiuni pot apărea datorită acestor motive sunt în afara garanţiei.
XV. ÎNTREŢINEREA ŞI CURĂŢAREA MAŞINII
69
Page 71
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
FILTRUL POMPEI
Un sistem de filtrare ce evită scamele ce rămân de pe rufe şi materiale mici din intrarea în pompă în timpul operaţiunii de evacuare efectuată de către maşină după finalizarea spălării pentru a prelungi ciclul de viaţă al pompei este disponibil Este recomandat să curăţaţi filtrul pompei o dată la fiecare 2 luni. Pentru curăţarea filtrului pompei: Pentru a deschide protecţia pompei, dumneavoastră puteţi utiliza linguriţa
detergentului pudră sau discul detergentului lichid ce iese din maşină.
Montaţi punctul de final al componentei de plastic în fanta protecţiei pompei şi
împingeţi-o înapoi. Acest lucru va deschide protecţia.
Înainte de deschiderea protecţiei filtrului, puneţi un vas în partea frontală a protecţiei
filtrului pentru preveni ieşirea apei rămase din maşină.
Slăbiţi protecţia filtrului în sensul invers al acelor de ceasornic şi apoi goliţi apa. Reţineţi: Va trebui să goliţi vasul de colectare a apei de mai multe ori datorită cantităţii de apă din maşină.
Curăţaţi materialele străine din filtru cu ajutorul unei perii. După curăţarea filtrului, montaţi protecţia acestuia şi strângeţi prin rotirea acesteia în
direcţia acelor de ceasornic.
În timp ce închideţi protecţia pompei, asiguraţi-vă că toate componentele părţilor
interioare se potrivesc cu găurile din panoul frontal.
Puteţi reataşa protecţia pompei într-o ordine inversă faţă de cum aţi scos-o.
Deoarece apa din pompă poate fi fierbinte, aşteptaţi până ce se răceşte.
70
Page 72
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
SERTAR DE DETERGENT
În timp detergenţii pot depozita reziduuri în sertarul pentru detergent şi carcasa sertarului de detergent. Pentru a curăţa reziduul format, dezasamblaţi sertarul pentru detergent în perioade corespunzătoare. Este recomandat să curăţaţi filtrul pompei o dată la fiecare 2 luni. Pentru scoaterea sertarului de detergent:
- Trageţi de sertarul de detergent până la capăt.
- Menţineţi tragerea prin apăsarea secţiunii prezentate mai jos din sertarul de detergent si apoi desurubati-l.
- Curăţaţi-l cu ajutorul unei perii.
- Colectaţi reziduurile în carcasa sertarului pentru detergent fără a le scăpa în maşină.
- Ansamblaţi sertarul după uscarea acestuia cu un prosop sau material textil uscat. Nu spălaţi sertarul pentru detergent în maşina de spălat vase.
COMPARTIMENTUL DETERGENTULUI LICHID
Demontaţi în scopul curăţării şi întreţinerii aparatura detergentului lichid după cum este prezentat în figura şi curăţaţi bine reziduurile de detergent. Puneţi aparatura înapoi. Asiguraţi-vă că nu sunt reziduuri în interior.
71
Page 73
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
XVI. OPRIRE CURGERE / CORP PRINCIPAL / TAMBUR
Oprire curgere
Dezasamblaţi sertarul pentru detergent. Dezasamblaţi şi curăţaţi reziduurile de balsam complet. După curăţare remontaţi-l. Verificaţi dacă este poziţionat corespunzător.
Corp
Curăţaţi corpul exterior al maşinii cu ajutorul apei calde şi agenţi de curăţare non-inflamabili care nu vor şlefui corpul maşinii. După clătirea cu puţină apă, uscaţi-l cu ajutorul unui material textil uscat şi moale.
Tambur
Nu lăsaţi obiecte metalice cum ar fi ace, agrafe, monezi etc. în maşină. Aceste obiecte duc la formarea de pete de rugină pe tambur. Pentru curăţarea unor astfel de pete, utilizaţi un agent de curăţare fără clor şi urmaţi instrucţiunile producătorilor agentului de curăţare. Nu utilizaţi niciodată burete de sârmă sau obiecte dure puternice pentru curăţarea petelor de rugină.
72
Page 74
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
DEFECTIUNE
CAUZE POSIBILE
DEPANARE
Maşina nu porneşte.
Dacă nu este conectată.
Conectati masina.
Sigurantele nu sunt bune.
Inlocuiti sigurantele.
Oprirea electricitatii.
Verificati puterea de alimentare.
Butonul Pornire/ Pauza nu este apasat.
Apasati butonul Start/Pauza.
Pozitia “stop” este activata
Comutati butonul programului in pozitia dorita.
Usa masinii nu este inchisa complet
Inchideti usa.
Maşina nu primeşte apă.
Robinetul este oprit.
Deschideţi robinetul.
Furtunul de admisie al apei
poate fi răsucit.
Verificaţi furtunul de admisie a apei şi dezrăsuciţi.
Furtun de admisie apă
înfundat.
Curăţaţi filtrele furtunului de admisie a
apei.
Filtru admisie înfundat.
Curăţaţi valvele filtrului de admisie
Uşa maşinii nu este închisă
complet.
Închideţi uşa.
Maşina nu evacuează apa.
Furtun de evacuare înfundat
sau răsucit.
Verificaţi furtunul de descărcare, apoi curăţaţi-l sau indreptati-l.
Filtrul pompei înfundat.
Curăţaţi filtrul pompei.
Rufe aşezate neomogen în maşină.
Distribuiţi corect rufele în maşină.
XVII. PROBLEME DE FUNCTIONARE
Toate operaţiunile de reparaţie necesare pentru maşină dumneavoastră trebuie să fie efectuate de către service-ul nostru autorizat. Dacă maşina are nevoie de o reparaţie sau dacă nu puteţi elimina defecta cu ajutorul informaţiilor furnizate după cum urmează:
• Decuplati masina.
• Opriti robinetul.
73
Page 75
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
DEFECTIUNE
CAUZE POSIBILE
DEPANARE
Maşina vibrează.
Picioruşele maşinii nu au
fost reglate.
Reglaţi picioruşele maşinii.
Balamalele de siguranţă montate pentru transport nu sunt dezasamblate.
Dezasamblaţi balamalele de siguranţă a maşinii.
Cantitate mai mică de rufe în maşină.
Aceasta nu va bloca funcţionarea maşinii.
Maşina este supraîncărcată cu
rufe sau acestea nu sunt bine distribuite.
Nu introduceţi mai multe rufe decât cantitatea necesară şi distribuiţi corespunzător rufele în maşină.
Maşina se sprijină pe o suprafaţă tare.
Preveniţi maşina de sprijinirea pe suprafeţe tari.
Spumă excesivă este formată în sertarul pentru
detergent.
Cantitate excesivă de detergent folosită.
Apăsaţi butonul Pornire/Pauză Pentru a elimina formarea de spumă, amestecaţi o lingură de balsam cu jumătate de litru de apă, şi turnaţi
amestecul în sertarul pentru detergent.
După 5-10 minute, apăsaţi din nou butonul Pornire/Pauză. În următoarea operaţiune de spălare, reglaţi corespunzător doza de detergent.
Detergent utilizat greşit.
Utilizaţi detergenţi produşi doar pentru maşini de spălat automate.
74
Page 76
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
DEFECTIUNE
CAUZE POSIBILE
DEPANARE
Rezultat de spălare
nesatisfăcător.
Gradul de contaminare a rufelor nu corespunde cu programul pe care l-aţi ales.
Selectaţi programul corespunzător pentru gradul de contaminare al rufelor dumneavoastră. (Consultaţi tabelul de program)
Cantitate de detergent
utilizată insuficient.
Reglaţi cantitatea de detergent bazată pe cantitatea şi gradul de contaminare
al rufelor.
Rufe amplasate în maşină în
exces de capacitatea
maximă.
Încărcaţi maşina cu rufe, cantitatea
care nu trebuie să depăşească capacitatea maximă de rufe
Apa este grea. (Contaminată, apă calcaroasă etc)
Reglaţi cantitatea de detergent bazată
pe instrucţiunile producătorului detergentului.
Rufe aşezate neomogen în maşină.
Distribuiţi corect şi omogen rufele dumneavoastră în maşină.
De îndată ce maşina este încărcată cu apă, aceasta este evacuată.
Capătul de final al furtunului de descărcare
este prea jos pentru
maşină.
Setaţi înălţimea corespunzătoare a
furtunului de evacuare a apei.
În timpul spălării, nu apare apă în
tambur.
Fără defect. Apa se află în partea neutilizată a
tamburului.
Rufele lasă reziduuri
de detergent pe acestea.
Particulele nedizolvate ale
unilor detergenţi se pot lipi
de rufe ca pete albe.
Efectuaţi o clătire suplimentară prin setarea maşinii la programul ”Clătire”, sau curăţaţi petele utilizând o perie după ce acestea s-au uscat.
Pete gri apar pe rufe.
Motivul pentru care apar poate
fi ulei, cremă sau alifii.
Aplicaţi cantitatea maximă de detergent conform producătorului detergentului în următoarea operaţiune de spălare.
75
Page 77
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
Operaţiunea de centrifugare nu este
efectuată sau întârzie.
Fără defect. Sistemul
nebalansat de control al încărcării a fost activat.
Sistemul nebalansat de control al
încărcării va încerca să distribuie rufele omogen. Operaţiunea de centrifugare va porni după ce rufele sunt distri- buite. Plasaţi rufele în maşină într-o formă balansată pentru următoarea dată.
COD DEFECTIUNE
CAUZA POSIBILA
REZOLVARE
Uşa maşinii este lăsată închisă.
Închideţi uşa. Dacă maşina menţine indicarea defecţiunii, opriţi maşina, decuplaţi-o şi contactaţi imediat cel
mai apropiat service autorizat.
Presiunea apei sau nivelul apei din interiorul maşinii
este scăzut.
Deschideţi robinetul. Apa principală poate fi decuplată. Dacă problema persistă, maşina dumneavoastră se va opri automat după un timp. Dacă problema persistă, opriţi robinetul şi contactaţi cel mai
apropiat centru autorizat de service.
Pompa este defectă sau
filtrul pompei este înfundat
sau conexiunea electrică a pompei este defectă.
Curăţaţi filtrul pompei. Dacă
problema persistă, contactaţi cel mai apropiat centru autorizat de service.
Maşina are o cantitate excesivă de apă.
Maşina va evacua apa singură. Înainte de operaţiunile de evacuare, opriţi maşina şi decuplaţi-o. Opriţi robinetul şi
contactaţi cel mai apropiat centru autorizat de service.
XVIII. PRECAUTII SI AVERTISMENTE
Maşina dumneavoastră este dotată cu sisteme ce sunt capabile de a lua precauţiile şi avertismentele necesare în cazul unei defecţiuni prin intermediul unei verificări în mod continuu în timpul operaţiunilor de spălare.
76
Page 78
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
XIX. INFORMATII PRACTICE
Băuturi alcoolice: Zona pătată trebuie spălată iniţial utilizând apă caldă, apoi curăţată cu glicerină şi apă şi apoi clătită cu apă amestecată cu oteţ.
Cremă de pantofi: Pata trebuie să fie curatata uşor fără avarierea ţesăturii şi apoi spălată şi clătită cu detergent. Dacă nu este eliminată, aceasta trebuie spălată utilizând un amestec obţinut din adăugarea unei cantităţi de alcool (96˚) în două cantităţi de apă, şi apoi spălată cu apă caldă. Ceai şi cafea: Întindeţi zona pătată pentru a cuprinde deschiderea unui vas şi turnaţi apă caldă cât de tare poate materialul să reziste. In acest caz, tipul materialului dumneavoastra, permite spalare cu înălbitor. Ciocolată şi cacao: După scufundarea rufelor dumneavoastră în apă rece şi frecarea cu să­pun sau detergent, spălaţi la temperatură tipul de material la care poate să reziste. În cazul în care pata de ulei este încă vizibilă, curăţaţi-o cu apă oxigenată (3%). Pastă de tomate: După frecarea substanţelor uscate fără avarierea ţesăturii, scufundaţi în apă timp de 30 de minute, şi apoi spălaţi cu detergent. Maioneza: Scoateţi reziduurile uscate ale petei de pe rufe, şi apoi ştergeţi cu un burete sau material textil moale scufundat mai întâi în apă rece. Frecaţi cu detergent, spălaţi cu înălbitor diluat. Pete de vaselină şi ulei: Mai întâi cântăriţi reziduurile. Frecaţi pata cu detergent şi spălaţi cu apă caldă cu săpun. Muştar: Aplicaţi glicerină pe zona pătată. Frecaţi cu detergent şi spălaţi. Dacă pata nu a ieşit, ştergeţi cu alcool. (Pentru materiale sintetice şi colorate, un amestec de o cantitate de alcool la două cantităţi de apă trebuie să fie utilizat) Fructe: Întindeţi zona pătată până când ajunge gura recipientului şi turnaţi apă rece peste. Nu turnaţi apă caldă peste pată. Ştergeţi cu apă caldă şi aplicaţi glicerină. Permiteţi 1-2 ore, ştergeţi cu câteva picături de oţet alb, şi clătiţi. Pete de iarbă: Ştergeţi zona pătată cu detergent. Dacă tipul materialului permite utilizarea înălbitorului, spălaţi cu înălbitor. Ştergeţi rufele din lână cu alcool. (Pentru materiale colorate, un amestec de o cantitate de alcool pur la două cantităţi de apă trebuie să fie utilizat)
Vopsea pe bază de ulei: Pata trebuie să fie eliminată prin aplicarea diluantului înainte de uscare. Apoi aceasta trebuie stearsa cu detergent si spalata.
Pată de arsură: Dacă rufa este potrivită aplicării înălbitorului, dumneavoastră puteţi adăuga înăl- bitor în apa de spălare. Pentru îmbrăcăminte din lenjerie, un material textil anterior scufundat în apă oxigenată va trebui să fie plasată peste pată şi trebuie călcată după ce s-a mai pus un material textil uscat peste acesta. Acesta trebuie să fie spălat după ce a fost clătit corespunzător.
77
Page 79
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
Cremă, îngheţată şi lapte: Scufundaţi rufele dumneavoastră în apă rece şi apoi frecaţi zona pătată, cu detergent. Dacă pata nu este eliminată, aplicaţi înălbitor potrivit rufelor dvs. (Nu utilizaţi înălbitor pentru rufele colorate) Mucegai: Petele de mucegai trebuie să fie eliminate cât mai repede posibil. Pata trebuie să fie spălată cu apă cu detergent, totuşi dacă nu poate fi scoasă, aceasta trebuie ştearsă cu apă oxigenată (3%). Cerneala: Supuneţi zona pătată la apă curentă şi aşteptaţi până când debitul de apă murdară se opreşte. Apoi ştergeţi cu apă cu lămâie şi detergent, şi spălaţi după aşteptând 5 minute.
78
Page 80
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
MASURI PENTRU PROTECTIA MEDIULUI
Va informam ca persoanele fizice au urmatoarele obligatii prin legislatia specifica privind protectia mediului si regimul deseurilor:
- Deseurile de echipamente electrice si electronice (DEEE), pot contine substante periculoase pentru mediu si sanatatea umana. Conform OUG 5/2015, exista obligativitatea predarii acestora, pentru tratarea corespunzatoare si valorificarea componentelor reciclabile. Societatea Network One
Distribution S.R.L. este platitoare de taxa de” timbru verde” pentru fiecare Echipament Electric si
Electronic (EEE) pe care il pune pe piata. Acest cost asigura tratarea ulterioara a echipamentelor uzate colectate. Din acest motiv, odata ce devine deseu, produsul EEE poate fi predat gratuit operatorului Dvs. de salubritate, la magazine atunci cand achizitionati alt echipament similar, sistemul “unul la unu “sau la punctul de colectare organizat de Primaria Sectorului / localitatii Dvs.
- Simbolul (marcajul) aplicat produselor, care indica faptul ca deseurile DEEE, bateriile si acumulatorii - fac obiectul unei colectari separate, il reprezinta o pubela barata cu o cruce.
Aceste masuri vor ajuta la protejarea mediului
Societatea Network One Distribution S.R.L. este inscrisa in Registrul de punere pe piata a echipamentelor electrice si electronice, avand numarul de inregistrare: RO-2016-03-EEE-0201-IV. De asemenea, au fost intocmite si sunt gestionate: Registrul de Retragere EEE si Registrul de Rechemare EEE, in conformitate cu HG 322/2013. Totodata societatea este inscrisa in Registrul de punere pe piata a bateriilor, avnd numarul de inregistrare: RO-2011-03-B&A-0283. Conformitatea cu directiva RoHS: Produsul pe care l-aţi cumpărat este conform cu Directiva RoHS UE (2011/65/UE). Nu conţine materialele dăunătoare şi interzise specificate în Directivă.
Va multumim ca participati alaturi de noi la protejarea mediului si a sanatatii umane!
79
Page 81
www.heinner.com 8Kg, 220-240V~50Hz, 1400rpm
HEINNER este marcă înregistrată a companiei Network One Distribution SRL. Celelalte
branduri și denumirile produselor sunt mărci de comerț sau mărci de comerț înregistrate ale respectivilor deținători.
Nicio parte a specificațiilor nu poate fi reprodusă sub nicio formă și prin niciun mijloc, nici utilizată pentru obținerea unor derivate precum traduceri, transformări sau adaptări, fără consimțământul
prealabil al companiei NETWORK ONE DISTRIBUTION.
Copyright © 2013 Network One Distribution. Toate drepturile rezervate.
www.heinner.com, http://www.nod.ro
Acest produs este proiectat și realizat în conformitate cu standardele și normele Comunității Europene.
Importator: Network One Distribution Str. Marcel Iancu, nr. 3-5, București, România Tel: +40 21 211 18 56, www.heinner.com , www.nod.ro
80
Loading...