Heinner HFF-160A+ User Manual

Page 1
EN User manual
Freezer
Model:HFF-160A+
www.heinner.com
1/12
Page 2
Safety and warning information
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _
Safety and warning information_ __ _ _ _ _ 2
Description of the appliance!_ _ _ _ _ _ _ _
Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
First use and installation_ _ _ _ _ _ _ _ _ _
Daily use _ _ _ _ _ _ __ _ _ _ _ _ _ _ _ _ _
7
8
9 10 12
4
4
6
7
Helpful hints and tips
Cleaning and care
What to do if_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Reversing the door
Disposal of the appliance
General safety
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or a lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for th e ir sa f ety. Chi l dr e n sho u ld be supervised to ensure that they do not play with the appliance. Keep all packaging away from children as there is risk of suffocation. If you are discarding the appliance, pull the plug out of the socket, cut the
Caution! Keep ventilation openings
clear of obstructions.
Safety for children and others who are vulnerable people
For your safety and correct usage before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to make sure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and be sure that they remain with the appliance if it is moved or sold, so
that a using it throughout its life will be properly informed on its correct appliance
usage and safety. For the safety of life and property, keep the precautions of these user's instructions as the manufacturer is not responsible for damages caused by omission.
,
connection cable (as close to the appliance as you can) and remove the door to prevent children playing from suffering an electric shock or from closing themselves inside it. If this appliance, featuring a magnetic door seals, is to replace an older appliance having a spring lock (latch) on the door or lid, be sure to make the spring lock unusable before you discard the old appliance. This will prevent it from becoming a death trap for a child.
The appliance is intended for keeping food and/or beverages in a normal household as explained in this instruction
Do not use a mechanical device or any artificial means to speed up the thawing process. Do not use other electrical appliances (such as ice cream makers) on the inside of refrigerating appliances, unless they are approved for this purpose by the manufacturer. Do not damage the refrigerant circuit. The refrigerant is contained within the refrigerant circuit of the appliance. a natural gas with a high level of environmental compatibility, which is nevertheless flammable.
manual.
It is
isobutane (R600a)
This appliance is in accordance with the following EU guidelines:
2006/95/EC and 2004/108/EC and 2009/125/EC and EC.643/2009.
www.heinner.com
2/12
Page 3
During the transportation and installation of the appliance, make certain that none of the components of the refrigerant circuit become damaged.
-avoid open flames and sources of ignition.
-thoroughly ventilate the room in which the appliance is located.
Caution: Risk of fire!
It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a shortcircuit, fire, and/or electric shock.
Warning! Any electrical component (power cord, plug, compressor) must be replaced by a certified service agent or qualified service personnel.
1. The power cord must not be lengthened.
2. Make sure that the power plug is not or damaged. A or damaged
power plug may overheat and cause a fire.
crushed crushed
3. Make sure that you can
plug of the appliance.
access the main
4. Do not pull the main cable.
5. If the power plug socket is loose, do not
insert the power plug. There is a risk of electric shock or fire.
6. You must not operate the appliance
without the interior lighting lamp cover.
Do not remove nor touch items from the freezer compartment if your hands are damp/wet, as this could cause skin abrasions or frost/freezer burns.
Do not place the appliance in direct sunlight.
Daily use
Do not store flammable gases or liquids inside the appliance. There is a risk of an explosion.
Do not operate any electrical appliances within the appliance (e.g. electric ice cream makers, mixers, etc.).
When unplugging, always pull the plug from the . Do not pull on the cord.
main outlet
Store pre-packaged frozen food in acc o r dance wi t h the fr o z en f o od manufacturer's instructions. 2)
The appliance's manufacturing storage recommendations should be strictly adhered to. Refer to instructions for storage.
Do not place carbonated or fizzy drinks in the freezer compartment as it creates pressure on the container, which may cause it to explode, resulting in damage to the appliance. 2)
Ice lollies can cause frost burns if consumed straight from the refrigerated compartment. 2)
the relevant
(popsicles)
Do not place hot items near the plastic components of this appliance.
Do not place food products directly against the air outlet on the rear wall. 1)
Frozen food must not be refrozen once it has been thawed out. 2)
Unpack the appliance and check if there is damages to it. Do not connect the appliance if it is damaged. Report possible damages immediately to the
you it. In this case,
retain . It is advisable to wait at least four hours
before connecting the appliance to allow the refrigerant to flow back into the compressor.
location
where purchased
all packing materials
For electrical connection, carefully, follow the instructions given in this manual.
Warning! Care and cleaning
Important! Installation
Before maintenance, switch off the appliance and disconnect the main plug from the main outlet. Do not clean the appliance with metal objects, steam cleaners, ethereal oils, organic solvents or abrasive cleansers. Do not use sharp objects to remove frost from the appliance.
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. This appliance is intended to be used in household and similar applications such as
-staff kitchen areas in shops, offices and other working environments;
-farm houses and by clients in hotels, motels and o t h e r residentia l type environments;
-bed and breakfast type environments;
-catering and similar non-retail applications Keep burning candles,lamps and other items with naked flames away from the appliance so that do not set the appliance on fire.
www.heinner.com
3/12
Page 4
Description of the appliance
Note: Due to unceasing modification of our products your refrigerator may be slightly different
from this Instruction Manual, but its functions and using methods remain the same.
View of the appliance
1. Control panel
2. Upper drawer
3. Drawers
4. Ice tray (inside)
5. Lower drawer
6. Adjustable feet
7. Door
Control panel
Normal
Min
Max
Important!-Normally we advise you select
setting of “Normal”, if you want the temperature higher or lower please turn the knob to Warmer or colder setting accordingly.
The thermostat control situated in the control panel regulates the temperature of the freezer compartment.
Position“MIN”–Cold. Position“NORMAL”–Colder normally, setting at this position. Position“MAX”–Coldest. The temperature will be affected by: Room temperature How often the door is opened How much food is stored Position of the appliance
In determining the correct temperature control setting, all these factors have to be considered and some experimentation may be necessary. Do not allow children to tamper with the controls or play with the product.
Adequate air circulation should be around the appliance, this leads to overheating. To a c h i e v e sufficient ventilation, follow the instructions relevant to the installation.
Wherever possible, the back of the product should be against a wall to avoid touching or catching warm parts (compressor, condenser), and to prevent the risk of fire, fol l ow the instr u ctions releva nt to installation.
The appliance must not be located close to radiators or
as a lack of
cooking appliances.
Any electrical work required to do the servicing of the appliance should be carried out by qualified electrician or
person.
This product must be serviced by an authorized Service Center, and only genuine spare parts must be used.
authorized
Service
2) If the appliance contains a freezer compartment.
1) If the appliance is Frost Free.
Make sure that the main plug is accessible after installation of the appliance.
1
2
3
4
5
6
7
www.heinner.com
4/12
Page 5
When you turn the knob to colder which can lead t o t he more energy e ffic iency. Otherwise, it would result the energy­consuming.
Important!-High ambient temperatures
(e.g. on hot summer days) and a cold setting on the temperature regulator (position “Max”) can cause the compressor to run
continuously or even non-stop!
Reason: when the ambient temperature is
high, the compressor must run continuously to maintain the low temperature in the appliance.
frozen food should be rearranged to leave space in the top two drawers for freezing. The packets to be frozen should be placed in the drawer in contact with the drawer surface as far as possible and spaced apart to allow cold air to circulate between them. They should not touch existing packets. If there is enough room, transfer the food you have frozen to the baskets or drawers to allow you to freeze a further load in the top drawer. Exceptionally large items can be stored by removing the drawer. Frozen food should not be refrozen once it has thawed out. Do not remove items from the freezer if your hands are damp/wet, as this could cause skin abrasions or “frost/freezer burns”.For safety reasons, the freezer drawer are fitted with stops but are readily removed by pulling them forward to the stop, then lifting the front and pulling all the way out. Refit by reversing this procedure.
Frozen food storage
The freezer compartment
The symbol means that your freezer will store frozen food at -18°C(-0.4F) or colder allowing for long term frozen-food storage and freezing of fresh food. The freezer temperature is controlled automatically by the thermostat situated in the control panel. Due to the different installations, methods of usage and weather conditions, adjustments to the temperature settings may be required.
These are best assessed against a temperature reading on a thermometer buried in the frozen food. The reading must be taken quickly as the thermometer temperature will rise rapidly after removal.
Freezing fresh food
Place the fresh food in the top freezer drawer. Food may need rearranging to achieve this. During the freezing process the temperature of fresh food should be reduced quickly so that ice crystals are kept as small as possible to avoid damaging the structure of food. If freezing takes place slowly large
ice crystals form and these will affect the quality of food once it has defrosted.Existing
Pre-packed commercially frozen food should be st o red i n ac c ord a nce wi t h t he manufacturer's instructions for a 4 star frozen food compartment and should be put in the freezer as soon as possible after purchase. Your freezer provides for long term storage which generally means up to 3 months but the length of the time can vary an d i t i s im po r ta nt t o f o ll ow t h e recommended times shown on packets of commercially frozen food. Do not place sealed containers or carbonated liquids such as fizzy drinks into the freezer as it creates pressure on the container which may cause it to explode leading to damage to the freezer. Ice cubes and ice lollies should not be consumed immediately after removal from the freezer as it may result in low temperature skin abrasions.
Briefly set the knob to the Max position.The
freezer temperature drops,the appliance operates with the maximum refrigerator capacity.
In case of a small amount food to be frozen,please wait about 4h;
In case of the maximum amount food to be frozen(see rating label),please wait about
24h. The appliance continues to operate in the
energy-saving, please set the knob to the
normal position。
www.heinner.com
5/12
Page 6
First use and installation
Cleaning before use
Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and neutral soap in order to remove the typical smell of a brand new product, then dry thoroughly.
Installation Positioning
Warning! Before installing, read the
instructions carefully for your safety and the correct operation of the appliance.
Position the appliance away from sources of heat such as stoves, radiators, direct sunlight, etc. Maximum performance and safety are guaranteed by maintaining the correct indoor temperature for the class of unit concerned, as specified on the rating plate.
This performs well from . The appliance may not work properly if it is left for a longer period at a temperature above or below the indicated range.
appliance N to ST
Climate class
Ambient temperature
SN
N
ST
T
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
75mm
100mm
100mm
Important!
freezer
For this r e ason,
space should be available around the freezer. It is advisable for there to be 75mm separating the back of the freezer to the wall at least 100mm of space on its two of over 100mm from its top and a clear space in front to allow the doors to open 160°.
It is necessary to have good ventilation around the to allow for the dissipation of heat, high efficiency,and low power consumption. su ffi ciently cle ared
sides, a height
Appliances must not be exposed to rain. Sufficient air must be allowed to circulate in the lower rear section of the appliance, as poor air circulation can affect perfor­mance. Built-in appliances should be positioned away from heat sources such as heaters and direct sunlight.
Leveling
The appliance should be level in order to eliminate vibration. To make the appliance level, it should be upright and both adjusters should be with in stable contact the floor. You can also adjust the level by
the appropriate level
the front (use your fingers or a suitable
spanner).
unscrewing adjustment in
Electrical connection
Caution! Any electrical work required to
install this appliance should be carried out by a qualified or person.authorized
Warning!This appliance must be grounded.
The manufacturer declines any liability should these safety measures not be observed.
www.heinner.com
6/12
Page 7
Daily use
Helpful hints and tips
Accessories 1) Freezer Drawer
For storing frozen food.
Ice-cube tray
For making ice and storing ice-cubes.
Freezer food compartment 2)
Thawing food 2)
In the freezer compartment. At room temperature. In a microwave oven. In a conventional or convection oven. Food once thawed should be re-frozen with the exception of special cases.
1) If the appliance contains related accessories and functions.
2) If the appliance contains a freezer compartment.
For freezing fresh food and storing frozen and deep-frozen food for long periods of time.
Noises during operation
Clicks- Whenever the compressor switches
on or off, a click can be heard. Humming- As soon as the compressor is in operation, you can hear it humming. Bubbling- When refrigerant flows into thin tubes, you can hear bubbling or splashing noises. Splashing- Even after the compressor has been switched off, this noise can be heard for a short time.
Energy saving tips
Do not install the appliance near stoves, radiators or other sources of warmth. Keep the time the appliance is open to a minimum. Do not set the temperature colder than necessary. Make sure the side plates and back plate of the appliance are at some distance from the wall, and follow the instructions relevant to installation. If th e d iagr am shows the correct combination for the drawers, crisper and shelves, do not adjust the combination as it would produce an effect on energy consumption.
Hints for freezing
When first starting-up or after a period out of use. Before putting the food in the compartment, let the appliance run at least 2 hours on the higher settings.
Hints for the storage of frozen food
Make sure that commercially frozen food was stored by the retailer. Once defrosted, foods deteriorate rapidly and can not be re-frozen. Do not exceed the storage period indicated by the food manufacturer.
Note: If the appliance contains related
accessories and functions.
Prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible to thaw only the quantity required.
subsequently
Wrap up the food in aluminum foil or
and make sure that the packages are airtight. Do not allow fresh, unfrozen food to touch food that is already frozen, thus avoiding a rise in the temperature of the latter.
polyethylene (plastic)
It is recommended to label and date each frozen package in order to keep track of the storage time.
Iced products, if consumed immediately after removal from the freezer compartment, can possibly cause skin to become freezer burnt.
www.heinner.com
7/12
Page 8
Cleaning and Care
Cleaning and care
For hygienic reasons, the appliance interior, including interior accessories, should be cleaned regularly.
The appliance should be cleaned and maintained at least every two months.
Warning! Danger of electrical shock!
The appliance should not be connected to the during cleaning. Before cleaning, switch the appliance off and remove the plug from the
switch off, or the circuit
breaker or fuse.
main power supply
main power
supply, shut off
Notice!
Remove the food from the appliance before cleaning. Store them in a cool place well covered.
Never clean the appliance with a steam cleaner. Moisture could accumulate in electrical components.
Hot vapors can lead to the damage of plastic parts.
Ethereal oils and organic solvents can attack plastic parts, e.g. lemon juice or the juice from an orange peel, butyric acid,or cleansers that contain acetic acid. Do not allow such substances to come into contact with appliance parts.
Do not use any abrasive cleansers.
and keep
Clean the appliance and the interior accessories with a cloth and lukewarm wa ter. Commercially available di sh washing detergents may also be used.
After cleaning, wipe with fresh water and a clean dish cloth.
Accumulation of dust at the condenser increases energy consumption; clean the condenser at the back of the appliance once a year with a soft brush or a vacuum cleaner.(Only for the outside-condenser product)
Check the water drain hole on the rear wall of the refrigerator compartment.
Clear a blocked drain hole with the aid of something like soft green peg, an be careful not to any damage to the cabinet by sharp
After everything is dry, the appliance back into service.
create
objects.
Defrosting Defrosting in the frozen food storage
compartment
Defrosting in the freezer chamber is operated manually. Before defrosting, take the food out. Take the ice tray and drawers out or put them into the fresh food compartment temporarily. Leave the door of the refrigerator open until ice and frost dissolve thoroughly and
at the bottom of the freezer chamber. Wipe out the water with the soft cloth. In up the process of defrosting, you may put a bowl of warm water (about 50°C) into the freezer chamber and scrape away the ice and frost with a defrosting spatula. After doing so, be sure to set the knob of the temperature regulator to the original position. It is not advisable to heat the freezer chamber directly with hot water or a hair d r y e r w hi le d e f r o s t i n g t o a v o i d deformation of the inner case. It is also not advisable to scrape off ice
accumulate
order to speed
and frost or separate foods from the containers which have been congealed together with the food with sharp tools or wooden bars, so as not to damage the inner casing or the surface of the evaporator.
Notice! The should be defrosted at least once a month. During its usage, if the door has been opened frequently the appliance has been used in extreme humidity, we advise the user to defrost every two weeks.
appliance
Empty the appliance. Pull out the power plug. Clean thoroughly (see section: Cleaning and Care). Leave the door open to prevent odours.
Taking the appliance out of service
www.heinner.com
8/12
Page 9
The food is too warm.
Interior lighting does not work.
Unusual noises.
The compressor does not start immediately after changing the temperature setting.
Water on the floor or storage shelves.
Temperature is not properly adjusted.
Door was open for an extended period.
A large quantity of warm food was placed in the appliance within the last 24 hours.
The appliance is near a heat source.
Light bulb is defective.
Door seal is not air-tight (possibly after reversing the door).
Appliance is not level.
The appliance is touching the wall or other objects.
A component, e.g. a pipe, on the rear of the appliance is touching another part of the appliance or the wall.
This is normal, no error has occurred.
Water drain hole is blocked.
Please the “Initial Start Up” section.
refer to
Open the door only as long as necessary.
Turn the to a colder setting temporarily.
Control panel
Please the “Installation Location” section.
refer to
Please look in the “Changing the Light Bulb “section.
Care f u l ly w a r m the leaking sections of the door seal with a hair dryer (on a cool setting). At the same time, shape the warmed door seal by hand so that it sits correctly.
Readjust the feet.
Move the appliance slightly.
If necessary, carefully bend the component out of the way.
The compressor starts after a period of time.
Refer to the “Cleaning and Care” section.
Heavy build-up of frost, possibly also on the door seal.
What to do if…
Problem Possible cause Solution
Appliance does not work.
Appliance cools too much.
Appliance is not switched on.
Main plug is not plugged in or is loose.
Fuse has blown or is defective.
Outlet is defective.
Temperature is set too cold.
Switch on the appliance.
Plug the appliance into the electrical socket.
Check fuse, replace if necessary. Defective parts need
repaired
to be
by an electrician.
Turn the temperature regulator to a warmer setting temporarily.
Important! Repairs to the appliance may only be performed by competent service engineers. Improper repairs can give rise to significant hazards for the user. If your appliance needs repairing, please contact your specialist dealer or your local Customer Service Center.
Warning! Before trouble-shooting, disconnect the power supply. Only a qualified electrician or other
personnel must carry out the trouble­shooting that is not in the manual.
www.heinner.com
9/12
Page 10
Reverse the door
1. Stand the , use a flat bladed screw driver to remove the 4 screw covers at the rear of the freezer lid.
freezer
2. Unscrew and lift the lid from the rear and remove it, then lift the upper door and place it on a padded surface to prevent it scratched.
The side in which the door opens can be
changed from the right side (as supplied) to
the left side, if the installation site
Tools you will need:
1. 8mm socket driver
2. Cross-shaped screwdriver
allows for it.
3. Putty knife or thin-blade screwdriver
6. Remove both adjustable feet and the bottom hinge bracket by unscrewing the bolts.
3. Use a flat bladed screw driver to remove the front ornament of top cover plate.
4. Replace the front ornament of top cover plate in the other side.
5.Remove the upper hinge core, transfer it to left side and tighten securely, then put it in a safe place.
www.heinner.com
10/12
Page 11
7. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it. Refit the bracket fitting the bottom hinge pin. Replace both adjustable feet. Transfer the lower door to the property position. Secure the door's level, make the bottom hinge pin into the lower hole of the door, then tight the bolts.
8.Replace the lid by fitting the upper hinge core into the upper door’s hole, securing it with the 4 screws.Replace the screw covers.
Warning!
When changing the side at which the door opens, the appliance must not be connected to the mains. Remove plug from the mains beforehand.
When you reverse the door, Please do :
1. Move the accessory B from the upper cover of the upper door and fit the accessory A that is a small detachable part from a small bag.
B
A
www.heinner.com
11/12
Page 12
Disposal of the appliance
Correct disposal of this product
It is prohibited to dispose of this appliance in domestic household waste.
Packaging materials
Packaging materials with the recycle symbol are recyclable. Dispose of the packaging in a suitable container to recycle it.
Before disposal of the appliance.
1. Disconnect the main plug from the main socket.
2. Cut off the main cable and discard it.
waste collection
This symbol on the product, or in its packaging, indicates that this product may not be treated as household waste. Instead, it should be taken to the appropriate waste collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by the inappropriate waste handling of this product. For more detailed information about the recycling of this product, please contact your local council, your household waste disposal service, or the shop where you purchased the product.
HEINNER is a registered trademark of Network One Distribution SRL. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from NETWORK ONE DISTRIBUTION.
This product is in conformity with norms and standards of European Community
Importer: Network One Distribution Europolis Logistic Park, Italia Street, 1-7, Chaijna, Ilfov, Romania Tel: +40 21 211 18 56, www.heinner.com , www.nod.ro
www.heinner.com
12/12
Loading...