HEEYOUNG MM20 Users Manual

Contents

1. Safety Instructions --------------------------- 2

2. Regulatory Information --------------------------- 3

3. Precautions --------------------------- 4

4. Before setting up

--------------------------- 5

5. Brief specifications of LCD Monitor ------------------------ 6

6. Setting up the LCD Monitor -------------------- 7

1) LCD Monitor’s Connectors -------------------- 7

2) Connecting the LCD Monitor

-------------------- 8

7. Adjusting the LCD Monitor --------------------------- 9

1) Adjustment OSD MENU Contents ---------------- 9

2) Adjusting the height and the viewing angle --------- 10

3) Adjustment OSD MENU Contents ---------------- 11

※ Appendix ----------------------------------- 12

1) DVI-D connector ----------------------- 12

2) Power Management ----------------------- 12

3) Specification ------------------------ 13

4) Trouble shooting ----------------------- 14

5) Contact ----------------------- 14

Safety Instructions

Symbol Explanation

CAUTION !

RISK OF ELCTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER(OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

MEDICAL EQUIPMENT

13XX

E246477

WITH RESPECT TO ELECTRIC SHOCK.FIRE AND MECHANICAL

HAZARDS ONLY IN ACCORDANCE WITH UL60601-1, AND

CAN/CSA C22.2 NO. 601.1

MEDICAL EQUIPMENT CERTIFIED

FOR CANADA

Grounding Reliability can only be achieved when the equipment is connected to an equivalent

receptacle with marked “Hospital Only” or “Hospital Grade”

Explanation of Graphical Symbols

Attention, consult ACCOMPANYING DOCUMENTS

The lightning flash with arrowhead symbol, within an equilateral triangle ,is

intended to alert the be user to the presence of un-insulated ”dangerous voltage”

within the product’s enclosure that of may sufficient magnitude to constitute a risk

of electric shock to persons

Stand-by Switch. Press to turn the monitor on or off(Stand-by mode).

Alternating Current

Regulatory Information

FCC RF INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures.

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio, TV technical for help.

Finally, any changes or modifications to the equipment by the user not expressly approved by the

grantee or manufacturer could void the users authority to operate such equipment.

For 120Volt applications, use only UL listed detachable power cord with NEMA configuration 5-15P

type(parallel blades) plug cap.For 240Volt applications use only UL Listed Detachable power supply

cord with NEMA configration 6-15P type(tandem blades) plug cap.

CE MARKING DECLARATION OF CONFORMITY

This LCD Monitor complies with the reguirements of the EC Directive 89/336/EEC “EMC Directive”and

73/23/EEC “Low Voltage Directive”as amended by Directive 93/68/EEC

The electro-magnetic susceptibility has been chosen at a level that gives correct operation in

residential areas. Business and light industrial premises and small-scale enterprises, inside as well as

outside of the buildings. All places of operation are characterized by connection to the public low

voltage power supply system.

Classification :

- Protection against electric shock : class I

- Applied Parts No Applied Parts.

- Protection against harmful ingress of water : ordinary IPXO

- Mode of operation : Continuous

- Degree of safety in the presence of flammable anesthetics mixture with air or with oxygen or

with nitrous oxide

- Not suitable for use in the presence of a flammable anesthetics mixture with air or with

oxygen or with nitrous oxide.

Precautions

1. Plug the power cord into a properly grounded outlet.

There is the risk of electric shock.

2. If you hear a noise or smell smoke from the view box or power

cord, unplug the power code immediately, and call service center.

There is the risk of electric shock or fire.

3. Do not overload an electrical outlet with too many devices.

There is the risk of fire.

4. Do not unplug from the outlet by pulling the power cord or when your hands are wet.

5. Do not bend the power cord excessively or place heavy objects on it.

Keep children and pets away from the power cord as they may cause damage the

power cord.

There is the risk of electric shock or fire.

6. Do not use a damaged power code or plug. Make sure the plug fits snugly into the outlet.

There is the risk of electric shock or fire.

7. Do not expose this monitor to the direct sun-light.

8. Do not allow any object or liquid to enter inside this monitor.

There is the risk of electric shock, fire, or damage to the monitor.

9. Do not attempt to disassemble, unfix or modify the monitor.

There is the risk of electric shock or fire.

10. Keep the monitor away from high temperature, humidity and dust etc..

-> Operating environment : 10~40 degrees Celsius (℃)

-> Operating environment : 10~80 relative humidity (%)

11. Use a proper voltage/current level indicated.

12. The device could be send back to the manufacturer for recycling or proper disposal

after their useful lives.

Alternatively the device shall be disposed in accordance with national laws after their

useful lives.

13. Equipment with signal input / signal output connectors should either indicate the connected

equipment comply with IEC 60601-1 and / or IEC 60601-1-1 harmonized

national standard or the combination should be evaluated.

14. This medical monitor is designed for viewing medical X-Ray Imaging.

15. Unplug the Power cord for isolation from supply.