HEEYOUNG MC13H User Manual

User’s Manual
MC13H & MM13H series
CONTENTS
1. Safety Instructions………………………………………..………………….…..4
2. Regulatory Information………………………………………….….…….……..5
3. Precautions………………………..………………………………………….…..6
4. Before setting up…………………………………..…………………..…….…..7
5. Features & checking the products…….…………………………..…….….….8 Features of Lumimed series…………………………………………………...8 Checking the products………………………………………………………….8
6 Setting up the LCD Monitor…………………………………………….……......9
Features of Connectors…………………………………………………….....9
Description of Connectors…………………………………………….……....9
Connecting the LCD Monitor………………………………………………...10 Warm-up T i me………………………………………………………….……...10
7. Adjusting of OSD Menu………………………………………………………....11
Features of OSD Controls…………………………………………..………..11 Description of Control ports………………………………………..…………11 OSD Operation……………………………………………………………..….12
8.Adjusting the Viewing angle………………………………………………..……13
9.Appendix…..………………………………………………………………..……..14
Safety Instructions
Symbol Explanation
CAUTION !
RISK OF ELCTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
MEDICAL EQUIPMENT
13XX
E246477
WITH RESPECT TO ELECTRIC SHOCK.FIRE AND MECHANICAL
HAZARDS ONLY IN ACCORDANCE WITH UL60601-1,
AND CAN/CSA C22.2 NO. 601.1 MEDICAL EQUIPMENT
CERTIFIED FOR CANADA
Grounding Reliability can only be achieved when the equipment is connected to an equivalent receptacle
with marked “Hospital Only” or “Hospital Grade”
Explanation of Graphical Symbols
Attention, consult ACCOMPANYING DOCUMENTS
The lightning flash with arrowhead symbol, within an equilateral triangle ,is
intended to alert the be user to the presence of un-insulated ”dangerous voltage”
within the product’s enclosure that of may sufficient magnitude to constitute a risk
of electric shock to persons
Stand-by Switch. Press to turn the monitor on or off(Stand-by mode).
Alternating Current
Regulatory Information
FCC RF INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television receptions, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-. Reorient or relocate the receiving antenna.
-. Increase the separation between the equipment receiver.
-. Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-. Consult the or an experienced radio /TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate the equipment.
CE MARKING DECLARATION OF CONFORMITY
This LCD Monitor complies with the requirements of the EC Directive 89/336/EEC”EMC Directive” and
93/42/EEC - Medical Device directive
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in
residential areas. Business and light industrial premises and small-scale enterprises, inside as well as
outside of the buildings. All places of operation are characterized by connection to the public low
voltage power supply system.
Classification:
- Protection against electric shock: Class I
- Applied Parts No Applied Parts.
- Protection against harmful ingress of water: ordinary IPX0
- Mode of operation: Continuous
- Degree of safety in the presence of flammable anesthetics mixture with air or with oxygen
or with nitrous oxide
- Not suitable for use in the presence of a flammable anesthetics mixture with air or with
oxygen or with nitrous oxide.
Precautions
● Plug the power cord into a properly grounded outlet. There is the risk of electric shock.
● If you hear a noise or smell smoke from the view box or power cord, unplug the power
cord immediately, and call service center. There is the risk of electric shock or fire
● Do not overload an electrical outlet with too many devices. There is the risk of fire
● Do not unplug from the outlet by pulling the power cord or when your hands are wet.
Do not bend the power cord excessively or place heavy objects on it.
Keep children and pets away from the power cord as they may cause damage the power cord.
● Do not use a damaged power cord or plug. Make sure the plug fits snugly into the outlet.
● Unplug the Power cord for isolation from supply if you use not monitor for a long time..
● Do not expose this monitor to the direct sun-light.
● Do not allow any object or liquid to enter inside this monitor.
There is the risk of electric shock, fire, or damage to the monitor
● Do not attempt to disassemble, unfix or modify the monitor.
● Keep the monitor away from high temperature, humidity and dust etc..
-> Operating environment Temperature : 10~40 degrees Celsius (℃)
Humidity : 10~80 relative humidity (%)
● Use a proper voltage/current level indicated.
● The device could be send back to the manufacturer for recycling or proper disposal
after their useful lives. Alternatively the device shall be disposed in accordance with
national laws after their useful lives.
● Equipment with signal input / signal output connectors should either indicate the connected
equipment comply with IEC 60601-1 and / or IEC 60601-1-1 harmonized national standard
or the combination should be evaluated.
● This medical monitor is designed for viewing medical X-Ray Images
NOTIC
Before setting up
Before setting up the LCD monitor, please read this manual to help your understanding of
the Monochrome TFT-LCD Monitor.
● Install the LCD Monitor on a flat place.
● Don’t install in the place with much of water or moisture
● Put the LCD Monitor in a place with low humidity and a few of dust.
● Don’t overload an electrical outlet with too many devices. There is the risk of fire.
● Don’t expose the LCD monitor to the direct sun light.
● Keep the monitor away from high temperature.
● Do not place the monitor in hazardous position.
E
● Please clean the panel and cabinet of monitor with a clean damp cloth and then wipe
and dry with a clean soft cloth
● Please do not use volatile organic solvents such as alcohol, thinner, and benzenes
when cleaning.
These can be damaged to the front panel
● Do not attempt to service, modify or dismantle this product.
Recommended service should be done at the prescribed intervals by Heeyoung Service
engineer, Agent or a trained Technician.
Loading...
+ 12 hidden pages