Page 1
Installation Instructions
TABLE LAMP
1. Put the BOTTOM RING on the table,then attach 3/4 while
LAMP SHADE CLOTH PLATE around the BOTTOM RING.
2.Attach the TOP RING to the upper LAMP SHADE
CLOTH PLATE and the rest 1/4 LAMP SHADE
CLOTH PLATE to the BOTTOM RING. Then fix the place
where the LAMP SHADE CLOTH PLATE is joined end to end.
3.Insert and thread the TUBE onto the BASE by
turning clockwise until secure.
4.Squeeze HARP together and insert into SADDLE.
5. Install Bulb (NOT Included) onto the LAMPHOLDER
according to the wattage label.
6. Place SHADE onto HARP
TIP: You can grasp the FINIAL and FASTENER together to
adjust the SHADE to correct position if it is skew. FASTENER
is slightly rotatable by external force.
CAUTION - Refer to the wattage caution label located
on the LAMPHOLDER
wattage - DO NOT
WARNING - Do not attempt to replace the bulb while
the lamp is plugged into a wall receptacle.
for recommended maximum
exceed recommended wattage.
and Tighten SHADE by FINIAL.
IMPORTANT SAFETY INSTRUCTIONS
This portable lamp has a polarized plug (One blade is wider than
the other) as a safety feature to reduce the risk of the electric shock.
This plug will fit in a polarized outlet only one way. If the plug does
not fit in the outlet, reverse the plug. If it still does not fit, consult a
qualified electrician. Never use an extension cord unless the plug
can be fully inserted. Do not alter the plug.
FINIAL
SHADE
FASTENER
HARP
LAMPHOLDER
SADDLE
TUBE
BASE
PLUG
Keep this instruction for future reference.
★
MADE IN CHINA
Loading...