HEATSTRIP THX2400UK, THX2400EU, THX3600UK, THX3600EU Operation, Installation, And Maintenance Manual

R A D I A N T O U T D O O R H E A T E R S

OPERATION, INSTALLATION AND MAINTENANCE MANUAL

HEATSTRIP® Max –EUROPE

The heater that i s a d e s i g n f e a t u r e !

2

Product Overview

Rev C NOV13

Why choose Heatstrip® electric radiant heaters for your outdoor or hard-to-heat indoor area?

As there is typically constant air movement in an outdoor or open indoor area, many conventional patio heaters rely on
convection heating which works by heating the surrounding air. This can be quite impractical for these areas, as this
heated air can easily blow away with natural air movement. Radiant style heaters transfer heat directly to objects through
infra-red waves.
Whilst convection heaters heat the air in between objects, radiant heaters heat the surface of the objects themselves.
HEATSTRIP® electric radiant heaters are more effective within an outdoor or uninsulated indoor area because they
provide targeted warmth directly to the people and objects in their path.

Discrete, stylish heating for undercover outdoor and indoor open areas

Using the radiant heating principle, HEATSTRIP® can provide effective and energy efficient comfort heating for undercover
outdoor and indoor open areas. HEATSTRIP® has successfully enabled many entertainment venues such as restaurants,
pubs and clubs to utilise their outdoor dining areas day and night, through all seasons. Within your workplace or business,
HEATSTRIP® can provide comfort heating for designated outdoor smoking and leisure areas, as well as for workstation
spot heating in factories, warehouses and showrooms. Within your home, HEATSTRIP® can provide comfort heating for
undercover alfresco dining and BBQ area, patios, verandas, courtyards and balconies.

APPLICATION THS THD THX

Indoor insulated areas, classrooms, offices, bathrooms, wet areas, drying rooms

√ √ X

Outdoor under cover, café, veranda, patio, balcony ceiling height 3m or less

X √ X

Outdoor under cover, café, veranda, patio, balcony ceiling height 3m or more

X X √

Highly exposed outdoor area

X X √

Indoor open area, warehouse, factory, production areas, sports facilities

√ √ √

Indoor spot heating, above tables, assembly areas

X √ √

There are 3 different series of products within the Heatstrip® product category. Each has a different temperature output,
making them ideal for different applications. Below is a list of some common applications, to assist with the selection of the
most effective and efficient series. This is a general guide only, please refer to the Product Manual for each product, for
more information.

HEATSTRIP® Design (THD models) is a premium high temperature heater and is primarily used for outdoor rooms where
there is 1,2 3, or 4 enclosed sides, with an ideal mounting height of 2.1 m to 2.7m.

HEATSTRIP® Max (THX models) is an ultra high temperature heater used for uncovered or open areas with a mounting
height of 2.4 m to 3.5m.

HEATSTRIP® Indoor (THS models) is a medium intensity heater used for protected indoor applications.

3

Efficient, cost effective electric heating

The innovative design of the HEATSTRIP® enables comfortable and even heat dispersion from the surface with minimal
operating costs.

Design flexibility

Two HEATSTRIP® Max models are available, ensuring the heating requirements of any outdoor or open
indoor area is possible. Brackets for direct ceiling or wall/ceiling angled mounting are supplied as standard.
Optional HEATSTRIP® accessories include extension mount brackets, twin mount brackets and end to end mounting
brackets.

Minimal maintenance

The HEATSTRIP® incorporates no internal moving parts ensuring quiet and virtually maintenance free operation.

Australian made

Designed, engineered and assembled in Australia

Easy to use

The standard HEATSTRIP® is controlled by a simple on/off operation, either when plugged directly into a power point, or
hard-wired via a wall mounted on/off switch. The unit takes approximately 5 minutes to heat up to maximum temperature
and approximately 30 minutes to cool down, depending upon the ambient temperature. Please don’t forget to turn it off.

4

Specifications

MODEL POWER

(WATTS)

CURRENT

(AMPS)

DIMENSIONS

(mm)

WEIGHT

(Kg)

LEAD

LENGTH

(mm)

PLUG

THX2400UK 2400 @ 240 v 10 854 x 170 x 80 5 1000 YES

THX3600UK 3600 @ 240 v 15 1184 x 170 x 80 6 1000 NO

THX2400EU 2400 @ 230 v 10 854 x 170 x 80 5 1000 YES

THX3600EU 3600 @ 230 v 15 1184 x 170 x 80 6 1000 NO

MODEL

HEATER TYPE High intensity electric radiant overhead heater with Incoloy 840 element

OUTPUT Refer to model code chart above

POWER 230-240 Volts Nominal at 50—60 Hertz, Single Phase

CONNECTION 3 Core Cable 2.5mm2

APPROVALS AUSTRALIA/CE

MOUNTING HEIGHT MINIMUM

RECOMMENDED
MAXIMUM

2.1 m

2.4 m to 3.5 m

3.5 m (For higher ceiling heights, units can be
lowered using optional bracket kits or refer to the
Heatstrip Max range)

PROTECTION RATING IPX5 Protection from water ingress from all directions

COUNTRY OF MANUFACTURE Australia

MOUNTING OPTIONS Suitable for ceiling, wall, beam mounting. Also available for extension

mount using rigid fixing poles and chain mount bracket.

8

5

4

1

1

8

0

1

7

0

1

7

0

80

80

5

BAR

BAR STOOLS

DINING TABLE

LOUNGE

BBQ

Spot heating principle

In most outdoor or difficult-to-heat indoor applications, therefore are 2 options when looking at the size and quan­tity of the heater required. Option 1 is to comfort heat the entire area based on the total dimensions of the space,
regarding of whether the entire area is being fully occupied. Option 2 is to spot heat the high use areas, such as
over outdoor tables, BBQ’s, lounges, assembly lines or indoor workstation.
Often it is more practical and efficient to spot heat these areas. Spot heating will help to reduce the initial capital
cost, as well as the running costs. Spot heating will allow the area to be “zoned”, meaning heating only the areas
that are being used, such as tables in a restaurant or outdoor alfresco area.

The top table shows how HEATSTRIP® Max can be used over a table.

The bottom table shows the flexibility of using HEATSTRIP® to provide a comfortable environment, even when
the layout of the area is very unusual.

THX2400

THX3600

6

Radiant footprint

HEATSTRIP® electric heater produce radiant heat, which heats objects rather than the air. Therefore, it is imperative that
objects to be heated (ie. People), are within the direct radiant footprint of the heater.

The diagram below shows the radiant footprint of HEATSTRIP® Max, and is an approximate guide based on a fully
enclosed, outdoor environment.
This diagram shows that the maximum heat output is found directly under the heater, and the temperature decreases as

you move away from the heater.
It highlights the importance of maintaining recommended mounting heights, and positioning the heater directly above the
area to be heated, if possible.

Also, the temperature (ie. surface temperature) is the same for both models, regardless of the wattage. However, the size
increases and the length of the unit increases, the radiant footprint will be larger.

800mm STANDING HEIGHT

1170mm SITTING HEIGHT

2400

1500

25°C

21°C

6

6

°

23°C

2600

3800

4400

THX RADIANT CROSS SECTIONAL AREA

3000

3500mm MAXIMUM HEIGHT

7

Selection guide

Prior to selecting the exact model and quantity required for your application, please ensure the correct range of Heatstrip
heaters is being used.

Below is an overview of the Heatstrip options.

HEATSTRIP® Design (THD models) is a premium high temperature heater and is primarily used for outdoor rooms where
there is 1,2 3 or 4 enclosed sides, with an ideal mounting height of 2.1 m to 2.7m. Ideal for hard to heat indoor applica­tions or moist environments where an IP55 rating is required.

HEATSTRIP® Max (THX models) is an ultra high temperature heater used for uncovered or open areas with a mounting
height of 2.4 m to 3.5m. Also suitable for difficult indoor environments such as showrooms, production lines, warehouses
etc.

HEATSTRIP® Indoor (THS models) is a medium intensity heater used for protected indoor applications, such as sun­rooms, school classrooms, halls, gymnasiums etc.

General recommendations for HEATSTRIP® Max:

• Ideal mounting height: 2.4m to 3.5m. Maximum is 3.5m in a protected outdoor environment.

• Ideal mounting location: ceiling mounted, directly above area to be heated (eg. above a table)

• Based on the radiant footprint of the previous page, for a protected outdoor area, a minimum of 250W/m2 is re-

quired. For indoor spot heating, a minimum heating capacity of 150W/m2 is recommended.

The below table outlines the coverage of each HEATSTRIP

®

Max model (in m2), based on 3 different scenarios. For

example, for an outdoor area that is protected from prevailing winds by walls, café blinds etc, Model THX2400 will cover

9.5m2 and Model THx3600 will cover 14.5m2.

MODEL INDOOR PROTECTED (m2) OUTDOOR ENCLOSED (m2) OUTDOOR EXPOSED (m2)

THX2400 16 9.5 6

THX3600 24 14.5 9

8

CEILING

Installation Requirements

The ideal mounting position for the HEATSTRIP®. Max is on the ceiling, directly above the area to be heated. If this is not
possible, HEATSTRIP®. Max can be mounted on a wall and angled downwards. In this situation, ensure the mounting
height is in the range of 2.4m to 3.0m and the table is within 3.0m of the wall.

For mounting heights more than 3.5m, we recommend the use of the optional accessories to reduce the height of the
heater to 2.4m—3.5 m. This will increase the effectiveness of your HEATSTRIP

®.

Refer to the Mounting Accessory section
for more information.
Electrical connections/GPO’s should not be located at the back of the heater. They should be located outside the physical
footprint of the units to minimize heat build-up behind the units.

Incorrect Installation Correct Installation

The heating surface must never be directed toward the ceiling

CEILING

C

E

I

L

I

N

G

CEILING

9

LIGHT OR SPRINKLER MUST

NOT BE BELOW THE HEATER

CEILING

FLOOR

SURFACE BELOW HEATER

150mm MIN.

300mm MIN.

1000mm MIN.

150mm MIN.

2100mm MIN.

LIGHT OR SPRINKLER MUST

NOT BE BELOW THE HEATER

CEILING

FLOOR

SURFACE BELOW HEATER

300mm MIN.

150mm MIN.

150mm MIN.

2100mm MIN.

1000mm MIN.

Angled Ceiling Installation

Ceiling Installation

150mm MIN.

150mm MIN.

300mm MIN.

LIGHT OR SPRINKLER MUST

NOT BE BELOW THE HEATER

CEILING

FLOOR

SURFACE BELOW HEATER

1000mm MIN.

2100mm MIN.

Installation location

—the below diagrams confirm the minimum recommended clearances.

Angled Wall Installation

10

Mounting options

The installation of HEATSTRIP® Max is simple and easy with the standard mounting brackets supplied. For other more
challenging locations there are a range of mounting options available - refer to below diagrams.

The HEATSTRIP® Max can be mounted directly to the ceiling, angled downwards on a wall, suspended on chains or
poles; attached to beams or poles; or 2 units together. Refer to the following pages for more detailed information on each
mounting option.

TWIN MOUNT

BRACKET

STANDARD
BRACKET

EXTENSION MOUNT

BRACKET

SUSPENSION MOUNT USING
STANDARD BRACKET

BEAM MOUNT USING

STANDARD BRACKET

EXTENSION MOUNT KIT WITH POLES

SUSPENSION MOUNTING

WITH STANDARD BRACKET

TWIN MOUNTING BRACKETS

END TO END MOUNTING BRACKET

STANDARD MOUNTING BRACKETS

INCLUDED IN BOX

BEAM MOUNT

WITH STANDARD BRACKET

11

Standard mounting brackets

The HEATSTRIP® Max comes with a pair of standard mounting brackets. These adjustable brackets allow direct ceiling or
wall mount, and come with preset angle options of parallel, 22.5° and 45°.

The flexible standard mounting bracket can be turned 90 degrees to mount onto a beam, it can also be used to suspend
with chains.

The brackets need to be mounted onto a secure frame or wall with a minimum distance between the two brackets. The
minimum distance (“B”) for each model is listed in the table below.

When completing the installation, ensure all screws are tight and unit is secure.

Note: When suspension mounting, chains are not included.

PART No PACKAGED

DIMENSIONS (mm)

WEIGHT (kg)

ZBRAK-85 100 x 100 x 25 0.5

MATERIALS

316 SS

Standard Mounting Bracket

CEILING MOUNTING

BEAM MOUNTING

SUSPENSION MOUNTING

WALL MOUNTING

CEILING

100

80

170

12

MODEL “B”

MINIMUM DISTANCE (mm)

THX2400 400

THX3600 600

"

B

"

MOUNTING

Fix the two mounting brackets to the ceiling or wall in the desired location (refer minimum bracket centre chart).
Make sure the method of fixing (bolts or screws) will be more than strong enough to support weight of heater
allowing for strong winds and other conditions.

Fix the L brackets to the threaded connectors in the required locations on rear of heater to match the centres of
the mounting brackets.
Lift heater into position and secure the mounting brackets to the L brackets using the screws provided.
Locate the C cutout on the L bracket onto the stud in the mounting bracket so you achieve either horizontal or
angle mounting position as required.
Tighten all screws/bolts/nuts.

NOTE: the standard bracket allows for normal or angle mounting of the heater and is suitable for ceiling or wall
mounting.

13

Twin mounting bracket

PART No PACKAGED

DIMENSIONS (mm)

WEIGHT

(kg)

THXAC-018 220 x 100 x 25 1

MATERIALS

316 SS

The optional Twin Mount bracket allows for two (2) units of HEATSTRIP
Max to be mounted side-by-side, either in parallel or angled as per the
diagram on the right. This is ideal for applications when a wider heat
coverage is required, or when there is mounting restrictions/limitations
(such as running between 2 rows of tables etc.)

14

End to end mounting bracket

PART No PACKAGAED

DIMENSIONS (mm)

WEIGHT

(kg)

THXAC-019 260 x 50 x 50 0.5

MATERIALS

316 SS

The end to end bracket allows multiple units to be joined in a straight line for maximum heat performance
and aesthetic appeal. This is ideal for applications such as long rows of tables and assembly lines, where a
constant heat coverage is required.

The bracket allows for a 50mm gap between units and an opening for the power connection. As per the dia­gram below, units should be mounted with the power leads together.

The end to end bracket can be used with either the standard ceiling/wall mount bracket or the extension
bracket & pole kit.

15

Extension Mount Bracket

PART No PACKAGED

DIMENSIONS (mm)

WEIGHT

(kg)

MATERIALS NOTES

THHAC-005 300 x 150 x 50 2 316 SS Kit includes 2x300mm extension pole, screws

and brackets

THHAC-006 600 x 150 x 50 2 316 SS Kit includes 2x600mm extension pole, screws

and brackets

THHAC-007 900 x 150 x 50 2.5 316 SS Kit includes 2x900mm extension pole, screws

and brackets

THHAC-008 1200 x 150 x 50 3 316 SS Kit includes 2x1200mm extension pole, screws

The Extension Mount bracket allows HEATSTRIP® Max units to be lowered from high ceilings, using rigid con­nections. The brackets are for use with 25mm x 25mm x 1mm tube (SHS), supplied as a complete kit with
brackets, pre-cut poles and connections. The standard length options as part of the kit are 300mm, 600mm,
900mm and 1200mm.

The kits include all brackets, poles and screws necessary for connection to the heaters, however it does not
include screws for attachment to the ceiling.

300

600

388

900

1200

688

988

1288

16

Safety

HEATSTRIP® Max has an IP rating of X5. This means it is safe for water ingress from all directions. The HEATSTRIP®
can be safely hosed down.
HEATSTRIP® has undergone extensive testing both in laboratory conditions; in Thermofilm’s manufacturing facility in
Melbourne and field trials in Australia, Europe and overseas. It has been this testing that gives the purchaser the
confidence of a high quality product.

Independent laboratory testing has confirmed full compliance with Australian and other International Standards. This
includes CE, AS/ANZ, UL/CSE

The heater comes in both plug (2400W) and hardwired (3600W) versions. In both cases the fixed wiring must be installed
by a licensed electrician in accordance with the relevant wiring regulations.

HEATSTRIP® is Class 1 equipment and must be earthed.

In operation, this heater is VERY HOT— do not touch any part of the heater while it is turned on. Do not touch any part
until 30 minutes after it is turned off.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or intellectual
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play with the
appliance.

Do not allow any cables, furnishings, flammable materials or other items come in contact with any surface of the heater.

If installed in wet areas, the heater switches or controls must be located so that they cannot be touched by persons in the
bath or shower.

The heater needs to be installed as per the installation instructions paying special attention to the minimum clearances.
The heater needs to be mounted on a rigid bracket or fixing.

The heater must not be mounted immediately below or in front of a socket outlet.

In case of a heater fault or damaged supply lead, the appliance should be returned to the point of purchase for return to
Grand Hall Europe B.V. for repair.

Maintenance

The HEATSTRIP® is made from durable materials, however regular care and maintenance of your heater will help prolong
the life of the heater.

It is recommended that you hose down the heater and with a soft cloth gently wipe the surfaces of the heater with a mild
detergent to remove the built up contaminants from the environment. Then rinse all detergent off the heater.
All chemicals in the atmosphere including cigarette smoke, pollution etc. will tarnish the surface of the heater. In this case,
additional cleaning and maintenance may be required. The cleaning process at least every three months will reduce the
amount of build up and keep it looking as best it can. If the heater is in a corrosive environment eg. salt spray, we
recommend that you clean your heater with a light spray of fresh water every week. After cleaning, turn the heater on for
20 minutes to dry any water residue and prevent water staining.
Before cleaning or inspection activity, the heater must be switched off and cooled down completely.
Do not use any abrasive materials or products to clean the heater, this includes solvents, citrus based cleaners or other
harsh cleaning products.

When handling the heater, ensure that your hands are clean or that you use clean gloves as grease or dirt can mark the
surface of the heater.

Do not use high pressure water to clean heaters, light water spray only.

17

1x THX2400
3x THX3600

THX2400
HEATER

FIELD WIRINGIN SWITCHBOARD

TT-MTM

WALL CONTROLLER

MAXIMUM 15A

ACTIVE
NEUTRAL
EARTH

10A

1x THX2400

THX2400
HEATER

FIELD WIRINGIN SWITCHBOARD

TT-MTM

WALL CONTROLLER

MAXIMUM 15A

ACTIVE
NEUTRAL
EARTH

10A

RCD

CIRCUIT

BREAKER

RCD

CIRCUIT

BREAKER

ISOLATOR

ISOLATOR

THX3600
HEATER

15A

ISOLATOR

RELAY

ISOLATOR

ACTIVE
NEUTRAL
EARTH

RCD

ACTIVE
NEUTRAL
EARTH

RCD

THX3600
HEATER

15A

THX3600
HEATER

15A

1x THX3600

THX3600
HEATER

FIELD WIRINGIN SWITCHBOARD

TT-MTM

WALL CONTROLLER

MAXIMUM 15A

ACTIVE
NEUTRAL
EARTH

15A

RCD

CIRCUIT

BREAKER

ISOLATOR

Heater wiring schematic diagrams

The HEATSTRIP® Max is required to be fitted with an "ON/OFF" isolation switch.

When more units need to connected from the same switch, a relay is needed. It is recommended that you talk to your
electrician for more detail.

When using contactors or relays ensure there is a minimum load of 250W on the controller.

18

Warranty Terms & Conditions

The below Warranty Terms and Conditions apply for international warranty only.

Grand Hall B.V. warrants to the original owner that HEATSTRIP® Max products will be free from defects in materials and
workmanship for a period of 12 months from the date of purchase in accordance with the following warranty terms and
conditions.

Provision of this warranty is subject to:

• The HEATSTRIP

®

product must be installed in accordance with the Installation Instructions and relevant electrical

standards and codes.

• The HEATSTRIP

®

product must be maintained and cleaned according to instructions detailed in the Installation Manual.

• There is no warranty expressed or implied with regard to capacity requirements. The selection of the unit or units

depends entirely upon the system design and capacities as determined by the purchaser.

• The customer has not repaired, opened or altered the product in any unauthorised manner.

• This warranty excludes damage to the product or components arising from circumstances outside the control of Grand

Hall B.V., including, but not limited to, where the product is not used for intended purpose; where the product has
been rectified in any way; incorrect installation; incorrect power supply; damaged caused during delivery; misapplication,
misuse, abuse, vandalism, lack of maintenance or accident.

• Grand Hall Europe’s obligations under this warranty are limited to repair or replacement at Grand Hall Europe B.V. of any

components of the product which Grand Hall Europe B.V. identifies to its satisfaction to be defective.

• Transportation charges involved in return of the product to Grand Hall Europe B.V. is the sole responsibility of the

customer.

• All products are inspected and tested before despatch and are at the risk of the purchaser after the shipment from Grand

Hall Europe B.V., if not delivered by Grand Hall Europe B.V. to destination.

• Discolouration of the surface may occur after a period of time, this does not constitute a warrantable event.

• Twisting and bending of the heaters may occur, this does not constitute a warrantable event.

• No products or components will be supplied in advance of an examination of the faulty product or components by Grand

Hall Europe B.V. or an authorized representative of Grand Hall Europe B.V.

• Grand Hall Europe B.V. does not participate in any site related costs or labour expenses incidental to replacement of

parts, repairing, removing, installing, servicing, transportation or handling of parts to complete products, and assumes no
liability on parts repaired or replaced without written authorisation. Grand Hall Europe B.V. shall not be liable for any
default or delay in performance of its warranty obligations caused by any circumstances beyond its control, including, but
not limited to, judicial or government restrictions, strikes, fires, floods, abnormal weather conditions, delayed supply of
components.

Should products be determined as damaged on arrival, immediately notify the transport company of the condition and have
them noted on the freight documents. If damage is discovered after unpacking, demand immediate inspection by the
transportation company and insist that a record of the damage is made on the freight documentation.

The customer warrants using the product in accordance with:

• Any instructions provided to it by Grand Hall Europe B.V. from time to time.

• All government and local regulations, including but not limited to all relevant electrical, environmental laws and

regulations governing the installation, storage, use, handling and maintenance of the goods.

• All necessary and appropriate precautions and safety measures relating to the installation, storage, use, handling and

maintenance of goods.

DISTRIBUTOR DETAILS FOR
EUROPE & UNITED KINGDOM

Distributed by: Manufactured by:

Grand Hall Europe B.V. Thermofilm Australia Pty. Ltd.

Tolstraat 17A 27 Rosalie St
7482 DC Haaksbergen, The Netherlands Springvale, Victoria, 3171 Australia

www.heatstrip.eu

R A D I A N T O U T D O O R H E A T E R S

HANDLEIDING VOOR BEDIENING, INSTALLATIE EN ONDERHOUD

HEATSTRIP® Max – EUROPA

De heater a ls d e s i g n e l e m e n t !

20

Productoverzicht

Rev. B MAY13

Heatstrip®-heaters voor buitenruimtes of moeilijk te verwarmen binnenruimtes

Omdat er buiten of in open binnenruimtes vaak een constante luchtstroom is, zijn veel terraskachels gebaseerd op
convectiewarmte waarmee de lucht verwarmd wordt. Dit kan uitermate onpraktisch zijn voor dit soort locaties, omdat de
verwarmde lucht eenvoudig weggeblazen kan worden door natuurlijke luchtstromen. Straalkachels verwarmen objecten
rechtstreeks door middel van infrarode straling.
Terwijl convectiekachels de lucht tussen objecten verwarmen, verwarmen straalheaters de oppervlakte van de objecten
zelf. HEATSTRIP®-straalheaters zijn effectiever in buitenruimtes en niet-geïsoleerde ruimtes omdat ze gericht warmte
afgeven aan de mensen en objecten in hun baan.

Discrete, stijlvolle heater voor overdekte buitenruimtes en open binnenruimtes

Dankzij het straalkachelprincipe kan HEATSTRIP® effectieve en energiezuinige comfortverwarming leveren voor
overdekte buitenruimtes en open binnenruimtes. Dankzij HEATSTRIP® kunnen veel uitgaansgelegenheden zoals
restaurants, kroegen en clubs dag en nacht en in alle seizoenen gebruik maken van hun terras. Op uw werkplaats of in uw
bedrijf kan HEATSTRIP®-comfortverwarming bieden voor aangewezen rookplekken en recreatiegebieden, maar ook
puntverwarming voor werkplaatsen in fabrieken, magazijnen en showrooms. Thuis kan HEATSTRIP®­comfortverwarming bieden onder overkappingen tijdens het buiten eten en barbecueën, of op patio’s, veranda’s,
binnenplaatsen en balkons.

Er zijn drie verschillende productseries in de Heatstrip®-productcategorie. Ze hebben elk een verschillende
temperatuuroutput, waardoor ze geschikt zijn voor verschillende toepassingen. Hieronder vindt u een lijst met
veelvoorkomende toepassingen om u te helpen de effectiefste en efficiëntste serie te kiezen. Dit is slechts een algemene
gids; raadpleeg de producthandleiding voor elk product voor meer informatie.

HEATSTRIP® Design (THD-modellen) is een premium heater met hoge temperatuur en is vooral bedoeld voor
buitenruimtes met 1, 2, 3 of 4 afgesloten zijden en met een ideale montagehoogte van 2,1 m tot 2,7 m.

HEATSTRIP® Max (THX-modellen) is een heater met extreem hoge temperatuur voor niet-overdekte of open gebieden
met een montagehoogte van 2,4 m tot 3,5 m.

HEATSTRIP® Indoor (THS-modellen) is een heater met een gemiddelde intensiteit voor toepassingen in beschermde
binnenruimtes.

TOEPASSING

THS THH THX

Geïsoleerde binnenruimtes, klaslokalen, kantoren, badkamers, vochtige gebieden, droogruimtes

√ √ X

Buiten overdekt, café, veranda, patio, balkon met plafond van 3 m of lager

X √ X

Buiten overdekt, café, veranda, patio, balkon met plafond van 3 m of hoger

X X √

Zeer open terrein buiten

X X √

Open ruimte binnen, magazijn, fabriek, productiefaciliteit, sportfaciliteiten

√ √ √

Puntverwarming binnen, boven tafels, montageruimtes

X √ √

21

Efficiënte, kosteneffectieve elektrische verwarming

Het innovatieve design van de HEATSTRIP® zorgt voor een comfortabele en gelijkmatige warmteverspreiding vanaf de
oppervlakte met minimale gebruikskosten.

Flexibel design

Er zijn twee HEATSTRIP® Max-modellen beschikbaar, zodat voldaan kan worden aan de verwarmingseisen voor elke
buitenruimte of open binnenruimte. Beugels voor montage aan de muur of het plafond worden standaard meegeleverd.
Ook zijn er optionele HEATSTRIP®-accessoires, zoals verlengde montagebeugels, dubbele montagebeugels en end-to­end montagebeugels.

Onderhoudsvriendelijk

De HEATSTRIP® bevat geen bewegende onderdelen, waardoor de heater vrijwel geluidloos werkt en vrijwel vrij van
onderhoud is.

Geproduceerd in Australië

De HEATSTRIP® is ontworpen, geproduceerd en geassembleerd in Australië.

Eenvoudig in gebruik

De standaard HEATSTRIP® wordt bediend door een eenvoudige aan/uit-schakelaar. Hij kan rechtstreeks op het
stopcontact aangesloten worden of permanent aangesloten worden via een in de muur geplaatste aan/uit-schakelaar. De
unit heeft ongeveer vijf minuten nodig om tot de maximale temperatuur op te warmen en ongeveer dertig minuten om af
te koelen, afhankelijk van de omgevingstemperatuur. Vergeet niet de unit uit te schakelen.

22

Specificaties

MODEL

VERMOGEN

(WATT)

STROOM

(AMPÈRE)

AFMETINGEN

(MM)

GEWICHT

(KG)

LENGTE KABEL

(MM)

STEKKER

THX2400UK 2400 @ 240 v 10 854 x 170 x 80 5 1000 JA

THX3600UK 3600 @ 240 v 15 1184 x 170 x 80 6 1000 NEE

THX2400EU 2400 @ 230 v 10 854 x 170 x 80 5 1000 JA

THX3600EU 3600 @ 230 v 15 1184 x 170 x 80 6 1000 NEE

MODEL

TYPE HEATER Hangende elektrische straalheater met hoge intensiteit met Incoloy 840-element

OUTPUT

Zie bovenstaande modeltabel

SPANNING 230-240 volt nominaal bij 50-60 Hertz, 1-fase

VERBINDING 3-aderige kabel 2,5 mm

2

KEURMERKEN AUSTRALIË/CE

MONTAGEHOOGTE MINIMAAL

AANBEVOLEN
MAXIMAAL

2.1 m

2.4 m to 3.5 m

3.5 m (voor hogere plafonds kunnen units verlaagd

worden met optionele beugelsets of het gamma van
Heatstrip Max)

BESCHERMINGSGRAAD IPX5-bescherming tegen indringing van water uit alle richtingen

LAND VAN HERKOMST Australië

MONTAGEMOGELIJKHEDEN Geschikt voor montage aan plafonds, muren en balken. Ook geschikt voor

verlengde montage met behulp van stijve bevestigingsbuizen en kettingbeugels.

8

5

4

1

1

8

0

1

7

0

1

7

0

80

80