HEATSTRIP THH1800AP Product & Assembly Manual
Product & Assembly
Manual
HEATSTRIP® Electric Portab l e H e ater
Model No. THH1800AP
Scan here for HEATSTRIP Installation video
www.heatstrip.com.au
2
For repairs or replacement parts, please contact:
Thermofilm Australia Pty Ltd
17 Johnston Court, Dandenong South, Victoria 3175, Australia
Telephone: (03) 9562 3455
8:30am-5:00pm Mon-Fri (EST)
Email: sales@thermofilm.com.au
To obtain the correct replacement parts for your electric radiant heater, please refer to
the part numbers in this parts list. The following information is required to ensure you
receive the correct parts:
1. Model and Serial Number (see label on the heater)
2. Part Number
3. Part Description
4. Quantity of parts needed
Important: Use only Thermofilm replacement parts. The use of any part that is not a
Thermofilm replacement part can be dangerous and void your product warranty. Keep
this Instruction Manual for convenient referral and for part replacement.
Contents
Product Overview 3
Specifications 3
Product Features & Benefits 3
Installation Requirements 4
Hardware Pack 4
Hardware Tools Required 4
Parts Diagram 5
Product Part List 6
Assembly Instructions 7
Electric Heater Assembly Instructions 7-9
Maintenance and Safety 10
Replacement Parts 10
Warranty 11
Manual # Rev A - Date:2017/02/09
3
Specifications - Australia
MODEL POWER
(WATTS)
CURRENT
(AMPS)
DIMENSIONS (mm) WEIGHT
(Kg)
LEAD
LENGTH
(mm)
PLUG
THH1800AP 1800 7.5 1104 (w) x 670 (d) x 2150 (h) 22 3000 Yes
HEATER TYPE High intensity electric radiant overhead heater with high surface area profiled
alloy
POWER 230-240 Volts Nominal at 50—60 Hertz, Single Phase
CONNECTION 3 Core Cable 2.5mm2
APPROVALS AUSTRALIA/NZ
PROTECTION RATING IP55 Protection from water ingress from all directions
COUNTRY OF ASSEMBLY Australia (Designed, engineered and assembled )
Features & Benefits
Stylish, high quality portable, free-standing outdoor heat-
er stand
Ideal for alfresco areas, balconies, apartments & hospital-
ity (internal & external use)
Heating area up to 3 - 4m2
Concealed power cable ensures a sleek appearance
Black, no glow heater
Components are sub-assembled for easy DIY installation
In-built wheels for easy portability, perfect for residential
and commercial applications
Corrosion protected for even the toughest environments
2 year residential and 1 year commercial warranty
Heater: High temp ceramic coated extruded alloy
Stand: E-coated mild steel with powder coat finish
Tips
If an extension lead is required, use one as short as pos-
sible, as a long lead may result in performance loss
Locate the heater as close to the power point as possible
This portable heater is for spot heating only. Locate as
close to the area you want to heat as possible (e.g. Table)
Store under cover to prolong heater life
4
Pan Head Screw M6x
10mm
Qty: 27
Part # S112M06102
Pan Head Screw M5x 10mm
Qty: 4
Part # S112M0510A
Hardware Diagram for THH1800AP
PART # PART DESCRIPTION QTY PURPOSE OF PART
P06033001A Hardware Pack For use in assembly of THH1800AP
S112M06102 Pan Head Screw M6 x 10mm Install Base Brackets to Base
S112M06102 Pan Head Screw M6 x 10mm Install Lower Post to Base
S112M06102 Pan Head Screw M6 x 10mm
Install Side Panels to Lower Post & Base
S112M06102 Pan Head Screw M6 x 10mm
S112M06102 Pan Head Screw M6 x 10mm
Install Real panel to Side Panel & Lower Post
S112M05102 Pan Head Screw M5 x 10mm
S112M06102 Pan Head Screw M6 x 10mm Install Heater Bracket to Upper Post
S112M06102 Pan Head Screw M6 x 10mm Install Upper Post to Lower Post
Screwdriver
Already Installed in Base
S112M0610A Pan Head Screw M6 x 10mm Install Lower Post to Base
S112M0610A Pan Head Screw M6 x 10mm Install Heater Bracket to Upper Post
Already Installed in Head Outer Case
S01010021A Bolt M6 x 130mm Install Heater Bracket
Hardware Pack For THH1800AP
Phillips Head Screwdriver
required (Not Included)
Loading...