HEATSTRIP THH1500A, THH1800A, THH2400A, THH3200A Product Installation Manual
Product &
Installation Manual
HEATSTRIP® Classic (THH-A)
The heater t h a t i s a d e s i g n f e ature!
2
Product Overview Rev I MAR16
APPLICATION THS THH THX
Indoor insulated areas, classrooms, offices, bathrooms, wet areas, drying rooms √ √
Outdoor under cover, café, veranda, patio, balcony ceiling height 2.7m or less √ √
Outdoor under cover, café, veranda, patio, balcony ceiling height 2.7m to 3.0m √
Highly exposed outdoor area √
Indoor open area, warehouse, factory, production areas, sports facilities √ √ √
Indoor spot heating, above tables, assembly areas √ √
There are three (3) different series of products within the Heatstrip® product category. Each has a different temperature
output, making them ideal for different applications. Below is a list of some common applications to assist with the
selection of the most effective and efficient series.
HEATSTRIP® Classic (THH-A models) is a premium high temperature heater and is primarily used for outdoor rooms
where there is 1,2 3, or 4 enclosed sides, with an mounting height of 2.1m to 2.7m.
HEATSTRIP® Max (THX models) is an ultra high temperature heater us ed for uncovered or open indoor or outdoor
areas with a mounting height of 2.1 m to 3.0m.
HEATSTRIP® Indoor (THS-A models) is a medium intensity heater used for protected indoor applications only.
Heatstrip Indoor (THS-A) Heatstrip Classic (THH-A) Heatstrip Max (THX)
3
Efficient, cost effective electric heating
The innovative design of the HEATSTRIP® enables comfortable and even heat dispersion from the surface with minimal
operating costs.
Design flexibility
Four HEATSTRIP® models are available, ensuring the heating requirements of any undercover outdoor or open
indoor area is possible. Brackets for direct ceiling or wall/ceiling angled mounting are supplied as standard.
Optional HEATSTRIP® accessories include beam or fixed umbrella mount brackets, extension mount brackets,
chain suspension brackets, twin mount brackets and flush mounting enclosures.
Minimal maintenance
The HEATSTRIP® incorporates no internal moving parts ensuring quiet and virtually maintenance free operation.
Australian made
Designed, engineered and assembled in Australia the HEATSTRIP® ,is fully backed by a 24 month residential warranty,
and 12 month commercial warranty.
Stylish design— The Heater that is a Design Feature!
The attractive HEATSTRIP® comes with a standard black face and anodised alloy rear casing.
Easy to use
The standard HEATSTRIP® is controller by a simple on/off operation, either when plugged directly into a power point, or
hard-wired via a wall mounted on/off switch. The unit takes approximately 15 minutes to heat up to maximum temperature
and approximately 30 minutes to cool down, depending upon the ambient temperature. Please don’t forget to turn it off.
We recommend installing your HEATSTRIP® Classic with a timer controller to ensure the unit is turned off after a preset
time. Thermofilm recommends Model TT-MTM controller, which includes a timer function and temperature control.
4
Why choose Heatstrip® electric radiant heaters for your outdoor or hard-to-heat indoor area?
Many conventional patio heaters rely on convection heating which works by heating the surrounding air to provide comfort.
This can be quite impractical for outdoor and open-indoor areas as there is typically constant air movement which can
easily blow away the warmed air. Radiant style heaters transfer heat directly to objects through infra-red waves.
While convection heaters heat the air between objects, radiant heaters directly heat the surface of the objects themselves.
HEATSTRIP® electric radiant heaters are more effective within an outdoor or uninsulated indoor area because they
provide targeted warmth directly to the people and objects in their path.
Discrete, stylish heating for undercover outdoor and indoor open areas
Using the radiant heating principle, HEATSTRIP® can provide effective and energy efficient comfort heating for undercover
outdoor and indoor open areas. HEATSTRIP® has successfully enabled many entertainment venues such as restaurants,
pubs and clubs to utilise their outdoor dining areas day and night, through all seasons. Within your workplace or business,
HEATSTRIP® can provide comfort heating for designated outdoor smoking and leisure areas, as well as for workstation
spot heating in factories, warehouses and showrooms. Within your home, HEATSTRIP® can provide comfort heating for
undercover alfresco dining and BBQ area, patios, verandas, courtyards and balconies.
Subtle, minimalist design
The stylish, slimline black face of the HEATSTRIP® does not emit light or glow when in use, blending elegantly into your
décor. Ceiling, wall and umbrella mounting options ensure that your valuable floor and table space is not wasted.
Efficient, cost effective electric heating
The innovative design of the HEATSTRIP® enables comfortable and even heat
dispersion from the heater surface with minimal operating costs.
Design flexibility
Four HEATSTRIP® models are available, ensuring the heating requirements of any
undercover outdoor or open indoor area is possible. Brackets for direct ceiling or
wall/ceiling angled mounting are supplied as standard.
Optional HEATSTRIP® accessories include beam or fixed umbrella mount brackets,
extension mount brackets,
chain suspension brackets, twin mount brackets and flush mounting enclosures.
Minimal maintenance
The HEATSTRIP® incorporates no internal moving parts ensuring quiet and virtually maintenance free operation.
Australian Product
Designed, engineered and assembled in Australia the HEATSTRIP® Classic is fully backed by a 24 month residential
warranty, and 12 month commercial warranty.
Stylish design— The Heater that is a Design Feature!
The attractive HEATSTRIP® comes with a standard black face and anodised alloy rear casing.
Easy to use
The standard HEATSTRIP® Classic is controlled by a simple on/off operation, either when plugged directly into a power
point, or hard-wired via a wall mounted on/off switch. The unit takes approximately 15 minutes to heat up to maximum
temperature and approximately 30 minutes to cool down, depending upon the ambient temperature. Please don’t forget to
turn it off.
We recommend installing your HEATSTRIP® with a timer controller to ensure the unit is turned off after a pre-set time.
Thermofilm recommends Model TT-MTM2 controller, which includes a timer function and temperature control functions.
5
Specifications - Australia
MODEL POWER
(WATTS)
CURRENT
(AMPS)
DIMENSIONS
(mm)
WEIGHT
(Kg)
LEAD
LENGTH
(mm)
PLUG
THH1500A 1500 6.3 924 x 165 x 48 5 1000 YES
THH1800A 1800 7.5 1104x 165 x 48 6 1000 YES
THH2400A 2400 10 1364 x 165 x 48 7 1000 YES
THH3200A 3200 13.3 1774 x 165 x 48 9 500 NO
MODEL
HEATER TYPE High intensity electric radiant overhead heater with high surface area
profiled alloy
OUTPUT Refer to model code chart above
POWER 230-240 Volts Nominal at 50—60 Hertz, Single Phase
CONNECTION 3 Core Cable 2.5mm2
APPROVALS AUSTRALIA/NZ
MOUNTING HEIGHT MINIMUM
RECOMMENDED
MAXIMUM
2.1 m
2.3 m to 2.5 m
2.7 m in a fully enclosed outdoor area (For higher
ceiling heights, units can be lowered using optional
bracket kits or refer to the Heatstrip Max range)
MOUNTING OPTIONS Suitable for ceiling, wall, beam, fixed umbrella and recess mounting. Also
available for extension mount using rigid fixing poles and chain mount
bracket.
PROTECTION RATING IP55 Protection from water ingress from all directions
COUNTRY OF MANUFACTURE Australia
6
Specifications - International
MODEL REGION VOLTAGE
(Volts)
POWER
(WATTS)
CURRENT
(AMPS)
DIMENSIONS
(mm)
WEIGHT
(Kg)
LEAD
LENGTH
(mm)
PLUG
THH1500AEU EUROPE 230 1500 6.3 924 x 165 x 48 5 1000 YES
230V
THH2400AEU EUROPE 230 2400 10 1364 x 165 x 48 7 1000 YES
230V
THH3200AEU EUROPE 230 3200 13.3 1774 x 165 x 48 8 500 NO
THH1500AUK UNITED
KINGDOM
240 1500 6.3 924 x 165 x 48 5 1000 YES
240V
THH2400AUK UNITED
KINGDOM
240 2400 10 1364 x 165 x 48 7 1000 YES
240V
THH3200AUK UNITED
KINGDOM
240 3200 13.3 1774 x 165 x 48 8 500 NO
THH1500AUL NORTH
AMERICA
115 1500
6.3 924 x 165 x 115 5 NONE NO
THH2400AUL NORTH
AMERICA
240 2400 10 924 x 165 x 115 7 NONE NO
THH3200AUL NORTH
AMERICA
240 3200 13.3 924 x 165 x 115 9 NONE NO
THH2400AUM NORTH
AMERICA
208 2400 10 924 x 165 x 115 7 NONE NO
THH3200AUM NORTH
AMERICA
208 3200 13.3 924 x 165 x 115 9 NONE NO
THH1300AJP JAPAN 100 1300 6.3 924 x 165 x 48 5 1000 YES
100V
THH1400AJP JAPAN 200 1400 7.5 924 x 165 x 48 5 1000 YES
200V
THH1600AJP JAPAN 200 1600 10 1104x 165 x 48 6 1000 YES
200V
HEATSTRIP® is supplied to many international markets, and therefore is available in a range of voltages and
lead configurations to meet local market approvals. HEATSTRIP® is fully compliant to the following
international standards.
Europe CE, ROHS, IEC 60335-2-30:2002
USA/Canada UL/CSA E321442
Japan PSE
7
Operating cost comparison
In many instances, patio heaters powered by gas bottles are used as an outdoor heating source. The below
table shows the operational cost comparison between HEATSTRIP® and a bottled gas outdoor heater. Not only
are the hourly running costs considerably less with HEATSTRIP®, but you never have to worry about running out
of gas, no refilling, no unattractive gas bottle to waste space; and HEATSTRIP® actually improves the value of
your property.
Notes:
1. Calculations of hourly running cost for outdoor gas heater is based on $25.00 average to fill a 9kg gas bottle and
average running time of 9 hours. $25.00 / 9 hours = $2.78 per hour
2. Electricity rate of 20.0 cents/kWh
3. All calculations are excluding GST.
1.5kW x 0.20 cents = $0.30 or 30 cents per hour
1.8kW x 0.20 cents = $0.36 or 36 cents per hour
2.4kW x 0.20 cents = $0.48 or 48 cents per hour
3.2kW x 0.20 cents = $0.64 or 64 cents per hour
Calculations of yearly running cost are based on 180 hours usage
180 hours x $2.78 = $500.40 yearly running cost for outdoor gas heater
180 hours x $0.30 = $54.00 yearly running cost for 1500W HEATSTRIP®
180 hours x $0.36 = $64.80 yearly running cost for 1800W HEATSTRIP®
180 hours x $0.48 = $86.40 yearly running cost for 2400W HEATSTRIP®
180 hours x $0.64 cents = $115.20 yearly running cost for 3200W HEATSTRIP®
RUNNING
COST
OUTDOOR GAS
HEATER
HEATSTRIP® CLASSIC ELECTRIC RADIANT HEATER
THH1500A THH1800A THH2400A THH3200A
PER HOUR $2.78/hr $0.30/hr $0.36/hr $0.48/hr $0.64/hr
PER YEAR $500.40 $54.00 $64.80 $86.40 $115.20
8
BAR
BAR STOOLS
DINING TABLE
LOUNGE
BBQ
2 x THH24006 x THH2400
Spot heating principle
In most outdoor or difficult-to-heat indoor applications, there are 2 options when looking at the size and quantity
of the heaters required.
Option 1 is to comfort heat the entire area based on the total dimensions of the space, regardless of whether the
entire area is being fully occupied.
Option 2 is to spot heat the high use areas, such as over outdoor tables, BBQ’s, lounges, assembly lines or indoor workstations.
Often it is more practical and efficient to spot heat high use areas. Spot heating will reduce both the initial capital
cost as well as the ongoing running costs. Spot heating will allow the area to be “zoned”, meaning only the areas
that are being used are heated, such as tables in a restaurant or outdoor alfresco area.
Option 1 and 2 show a comparison between heating an entire area or spot heating over a table.
The bottom layout shows the flexibility of using HEATSTRIP® to provide a comfortable environment, even when
the layout of the area is very unusual.
Option 1: 6 x THH2400A Option 2: 2 x THH2400A
9
Radiant footprint
HEATSTRIP® electric heaters produce radiant heat which heats objects rather than the air. Therefore, it is imperative that
objects to be heated (ie. people), are within
the direct radiant footprint of the heater.
The diagram to the left shows the radiant
footprint of
HEATSTRIP® Classic, and is an
approximate guide based on a fully enclosed
outdoor environment.
This diagram shows that the maximum heat
output is found directly under the heater, and
the temperature decreases as you move
away from the heater.
It highlights the importance of maintaining
recommended mounting heights, and if
possible, positioning the heater directly
above the area to be heated.
Note that the temperature is the same for all
4 models, regardless of the wattage.
However, as the size increases and the
length of the unit increases, the radiant
footprint will be longer.
The below diagrams show the approximate heating area for each model, based on both an indoor and outdoor enclosed
environment, with direct overhead mounting.
The radiant footprint is reduced in angled, wall mounted installations.
3500
2100
1800
THH3200
2600
2100
1400
THH2400
2000
2100
1100
THH1800
1600
2100
900
THH1500
HEATED AREA
INDOOR SPOT HEATING
2700
2100
1800
THH3200
2000
2100
1400
THH2400
1500
2100
1100
THH1800
1300
2100
900
THH1500
HEATED AREA
OUTDOOR ENCLOSED AREA
Loading...