HEATSTRIP THE1800EU, THE1800UK, THE3600EU, THE2400EU, THE3600UK Operation, Installation, And Maintenance Manual

...

LEADING HEATING TECHNOLOGY

OPERATION, INSTALLATION AND MAINTENANCE MANUAL

HEATSTRIP Elegance - EUROPE

The heater that i s a d e s i g n f e a t u r e !

CONTENTS Rev I Nov 16

Product overview ___________________________ 3 Specifications ______________________________ 5 Spot heating principle ________________________ 6 Radiant footprint ____________________________ 7 Selection Guide _____________________________ 8 Table layout ________________________________ 9 Installation requirements ______________________ 10 Installation location __________________________ 11 Mounting options____________________________ 12 Standard mounting brackets ___________________ 13 Flush mount enclosure _______________________ 14

FME dimensions _________________________ 15 FME installation clearance dimensions _______ 16

FME installation instructions ________________ 17 Extension mount bracket _____________________ 18 Wall controller w/ remote control _ _______________19

Wall control installation _______________________ 20

Safety, Maintenance _________________________ 21

Warranty __________________________________22

Dutch____ _________________________________ 24

French____________________________________ 46

German ___________________________________67

Product Overview

Why choose Heatstrip electric radiant heaters for your outdoor or hard-to-heat indoor area?

As there is typically constant air movement in an outdoor or open indoor area, many conventional patio heaters rely on convection heating which works by heating the surrounding air. This can be quite impractical for these areas, as this heated air can easily blow away with natural air movement. Radiant style heaters transfer heat directly to objects through infra-red waves. Whilst convection heaters heat the air in between objects, radiant heaters heat the surface of the objects themselves. HEATSTRIP electric radiant heaters are more effective within an outdoor or uninsulated indoor area because they provide targeted warmth directly to the people and objects in their path.

Discrete, stylish heating for undercover outdoor and indoor open areas

Using the radiant heating principle, HEATSTRIP can provide effective and energy efficient comfort heating for undercover outdoor and indoor open areas. HEATSTRIP has successfully enabled many entertainment venues such as restaurants, pubs and clubs to utilise their outdoor dining areas day and night, through all seasons. Within your workplace or business, HEATSTRIP can provide comfort heating for designated outdoor smoking and leisure areas, as well as for workstation spot heating in factories, warehouses and showrooms. Within your home, HEATSTRIP can provide comfort heating for undercover alfresco dining and BBQ area, patios, verandas, courtyards and balconies.

Subtle, minimalist design

The stylish, slimline Off-White face of the HEATSTRIP does not emit light or glow when in use, blending elegantly into your décor. Ceiling, wall and umbrella mounting options ensure that your valuable floor and table space is not wasted.

There are 4 different series of products within the HEATSTRIP product category. Each has a different temperature output, making them ideal for different applications. Below is a list of some common applications, to assist with the selection of the most effective and efficient series. This is a general guide only, please refer to the Product Manual for each product, for more information.

HEATSTRIP Max (THX models) is an ultra high temperature heater used for uncovered or open areas with a mounting height of 2.4 m to 3.5m.

HEATSTRIP Design / Elegance (THH/THE models) is a premium high temperature heater and is primarily used for outdoor rooms where there is 1,2 3, or 4 enclosed sides, with an ideal mounting height of 2.1 m to 2.7m.

HEATSTRIP Indoor (THS models) is a medium intensity heater used for protected indoor applications.

APPLICATION THH THE

Indoor insulated areas, classrooms, offices, bathrooms, wet areas, drying rooms √ √

THX

√

Outdoor under cover, café, veranda, patio, balcony ceiling height 2.7m or less √ √

Outdoor under cover, café, veranda, patio, balcony ceiling height 2.7m to 3.0m

Highly exposed outdoor area

√

THS

√

Indoor open area, warehouse, factory, production areas, sports facilities √ √

Indoor spot heating, above tables, assembly areas √ √

√

Efficient, cost effective electric heating

The innovative design of the HEATSTRIP enables comfortable and even heat dispersion from the surface with minimal operating costs.

Design flexibility

4 HEATSTRIP models are available, ensuring the heating requirements of any undercover outdoor or open indoor area is possible. Brackets for direct ceiling or wall/ceiling angled mounting are supplied as standard. Optional HEATSTRIP accessories include extension mount brackets and flush mounting enclosures.

Australian made

HEATSTRIP is designed, engineered and assembled in Australia.

Stylish design— The Heater that is a Design Feature!

The attractive HEATSTRIP Elegance comes with a standard Off-White face and anodised alloy rear casing.

Easy to use

The HEATSTRIP is controlled by a simple on/off operation, either when plugged directly into a power point, or hard-wired via a wall mounted on/off switch. The unit takes approximately 15 minutes to heat up to maximum temperature and approximately 30 minutes to cool down, depending upon the ambient temperature. Please don’t forget to turn it off.

Specifications - Europe

MODEL POWER

(WATTS)

THE1800EU 1800

THE2400EU 2400

THE3600EU 3600 15 1804 x 170 x 48.5

THE1800UK

THE2400UK

THE3600UK

HEATER TYPE

OUTPUT Refer to model code chart above

POWER 230-240 Volts Nominal at 50—60 Hertz, Single Phase

CONNECTION 3 Core Cable 2.5mm2

APPROVALS CE

MOUNTING HEIGHT MINIMUM

1800 7.5 974x 170 x 48.5 4 1000

2400

3600

CURRENT

(AMPS)

7.5

DIMENSIONS

(mm)

974x 170 x 48.5

1204 x 170 x 48.5

1804 x 170 x 48.5

High intensity electric radiant overhead heater with high surface area profiled alloy

RECOMMENDED MAXIMUM

WEIGHT

(Kg)

LEAD

LENGTH

PLUG

(mm)

9 1000

2.1 m

2.3 m to 2.7 m

3.0 m (For higher ceiling heights, units can be lowered using optional bracket kits or refer to the Heatstrip Max range)

1000

YES

VOLTAGE

(VOLTS)

230

240

MOUNTING OPTIONS Suitable for ceiling, wall, beam, fixed umbrella and recess mounting. Also

available for extension mount using rigid fixing poles and chain mount bracket.

PROTECTION RATING IP55 Protection from water ingress from all directions

COUNTRY OF MANUFACTURE Australia

BAR

BAR STOOLS

DINING TABLE

LOUNGE

BBQ

Spot Heating Principle

In most outdoor or difficult-to-heat indoor applications, therefore are 2 options when looking at the size and quantity of the heater required. Option 1 is to comfort heat the entire area based on the total dimensions of the space, regarding of whether the entire area is being fully occupied. Option 2 is to spot heat the high use areas, such as over outdoor tables, BBQ’s, lounges, assembly lines or indoor workstation. Often it is more practical and efficient to spot heat these areas. Spot heating will help to reduce the initial capital

cost, as well as the running costs. Spot heating will allow the area to be “zoned”, meaning heating only the areas

that are being used, such as tables in a restaurant or outdoor alfresco area.

The top table shows a comparison between spot heating over a table, or heating an entire area. The bottom table shows the flexibility of using HEATSTRIP to provide a comfortable environment, even when the layout of the area is very unusual.

Option 1 - 6 x THE2400AEU

Option 2 - 2 x THE2400AEU

Radiant Footprint

25°C

21°C

800mm STANDING HGT

1170mm SITTING HEIGHT

2400mm MAXIMUM HEIGHT

54°

23°C

1500

1400

2000

2800

HEATSTRIP electric heaters produce radiant heat which heats objects rather than the air. Therefore, it is imperative that objects to be heated (ie. people), are within the direct radiant footprint of the heater.

The diagram to the left shows the radiant footprint of HEATSTRIP Elegance, and is an approximate guide based on a fully enclosed, outdoor environment.

This diagram shows that the maximum heat output is found directly under the heater, and the temperature decreases as you move away from the heater. It highlights the importance of maintaining recommended mounting heights, and if possible, positioning the heater directly above the area to be heated.

Also, the temperature (ie. surface temperature) is the same for all 3 models, regardless of the wattage. However, as the size increases and the length of the unit increases, the radiant footprint will be larger.

The below diagrams show the approximate heating area for each model, based on both an indoor and outdoor enclosed environment, with direct overhead mounting. Radiant footprint is reduced in angled, wall mounted applications.

Selection Guide

General recommendations for HEATSTRIP Elegance:

• Ideal mounting height: 2.3m to 2.5m. Maximum is 2.7m in a fully protected/enclosed outdoor environment.

• Ideal mounting location: ceiling mounted, directly above area to be heated (eg. above a table)

• Minimum recommended heating capacity for various installations are: 400W/m2 for indoor spot heating; 500W/m2

for protected outdoor areas, and 600W/m2 for exposed outdoor areas. To ensure the HEATSTRIP Elegance provides satisfactory performance, HEATSTRIP strongly recommends using conservative coverage areas when specifying how many heaters are required for each installation.

The table below outlines the maximum coverage of each HEATSTRIP Elegance model based on 3 different sce-

narios with direct overhead mounting at minimum installation height. For example, for an outdoor area that is protected from prevailing winds by walls, café blinds etc, Model THE1800 will cover a maximum of 3.6m2 and Model THE2400 will cover a maximum of 4.8m2.

For angled wall mounting applications, the coverage is reduced by up to 40%.

MODEL

THE 1800 4.5 3.6 3

THE 2400 6 4.8 4

THE 3600 9 7.2 6

INDOOR PROTECTED (m2)

OUTDOOR E

NCLOSED (

m2)

OUTDOOR EXPOSED (m2)

Table Layout

For the majority of outdoor applications, the most effective method is to spot heat a table or similar area. The below diagrams provides an easy selection guide for the approximate model and quantity of heaters required to heat common residential table settings.

Selections are based on HEATSTRIP Elegance being mounted at 2.4m from the floor and an undercover fully enclosed outdoor area.

Installation Requirements

The ideal mounting position for the HEATSTRIP. Elegance is on the ceiling, directly above the area to be heated. If this is not possible, HEATSTRIP. can be mounted on a wall and angled downwards. In this situation, ensure the mounting height is in the range of 2.1m to 2.7m and the table is within 2.5m of the wall.

For mounting heights more than 3m, we recommend the use of the optional accessories to reduce the height of the heater to 2.3m - 2.7 m. This will increase the effectiveness of your HEATSTRIP. Refer to the Mounting Accessory section for more information. Electrical connections/GPO’s should not be located at the back of the heater. They should be located outside the physical footprint of the units to minimize heat build-up behind the units. If the heater is to be mounted on an incline (eg. Vaulted ceiling), ensure the electrical connection is located at the lowest point of the heater.

Incorrect Installation Correct Installation

The heating surface must never be directed toward the ceiling

CEILING INSTALLATION

ANGLED WALL INSTALLATION

ANGLED CEILING INSTALLATION

Installation Location

the below diagrams confirm the minimum recommended clearances.

LIGHT, FAN OR SPRINKLER MUST NOT BE BELOW HEATER

Mounting Options

The installation of HEATSTRIP Elegance is simple and easy with the standard mounting brackets supplied. For other more challenging locations there are a range of mounting options available - refer to below diagrams.

The HEATSTRIP Elegance can be mounted directly to the ceiling, angled downwards on a wall, fitted flush with the ceiling; suspended on chains or poles; attached to beams or poles; mounted end-to-end, or 2 units together. Refer to the following pages for more detailed information on each mounting option.

CHAIN / WIRE

MOUNTING

EXTENSION

MOUNT

BRACKET

STANDARD

BRACKET

CEILING

FLUSH

MOUNT

ENCLOUSURE

STANDARD

BRACKET

POLE / BEAM

MOUNTING

Standard Mounting Brackets

The HEATSTRIP Elegance comes with a pair of standard mounting brackets. These adjustable brackets allow direct ceiling or wall mount, and come with preset angle options of parallel, 22.5° and 45°.

MODEL “D”

MINIMUM DISTANCE (mm)

THE1800 570

THE2400 700

THE3600 1000

PART No PACKAGED

DIMENSIONS (mm)

ZBRAK-110 125 x 150 x 40 0.2 ALLOY

WEIGHT (kg) MATERIALS

COLOUR

Off-White

Flush Mount Enclosure

The Flush Mount Enclosure is an ideal way to neatly install the HEATSTRIP Elegance into a ceiling. They are available for all HEATSTRIP Elegance models, and are supplied as a one-piece unit for mounting of heaters. Flush mounting can be used with plaster or wood lined or concrete ceiling materials.

An ideal mounting height is 2.5m-2.7m, with a maximum ceiling height of 3.0m in an outdoor enclosed environment. Maximum mounting heights should be strictly followed, otherwise the performance of the units may be reduced.

Safety

Do not allow any cables, furnishings, flammable materials or other items come in contact with any surface of the Flush Mount Enclosure.

The Flush Mount Enclosure needs to be installed as per the installation instructions paying special attention to the minimum clearances. The heater needs to be mounted on a rigid bracket or fixing.

Maintenance Flush Mount Enclosure

The Flush Mount Enclosure is made from durable materials, however regular care and maintenance of your product will help prolong its life.

It is recommended that you wipe down your Flush Mount Enclosure and with a soft cloth gently wipe the surfaces of the Flush Mount Enclosure with a mild detergent to remove the built up contaminants from the environment. Then with a clean cloth ensure all detergent is removed.

All chemicals in the atmosphere including cigarette smoke, pollution etc. will tarnish the surface of the Flush Mount Enclosure. In this case, additional cleaning and maintenance may be required. The cleaning process at least every three months will reduce the amount of build up and keep it looking as best it can. If the Flush Mount Enclosure is in a corrosive environment eg. salt spray, we recommend that you clean the Flush Mount Enclosure every week.

Before cleanings or inspection activity, the heater must be switched off and cooled down completely.

Do not use any abrasive materials or products to clean the Flush Mount Enclosure, this includes solvents, citrus based cleaners or other harsh cleaning products.

When handling the Flush Mount Enclosure, ensure that your hands are clean or that you use clean gloves as grease or dirt can mark the surface of the heater.

Do not use high pressure water to clean Flush Mount Enclosure. It is not recommended to hose down the Flush Mount Enclosure and heater as water may get into the roof cavity.

VIEW FROM TOP

VIEW FROM UNDERNEATH

Flush mount enclosure

The Flush Mount Enclosure is an ideal way to neatly install the HEATSTRIP into a ceiling. They are available for all HEATSTRIP Elegance models, and are supplied as a one-piece unit suitable for mounting individual heaters. Flush mounting ca

An ideal mounting height is 2.3m-2.5m, with a maximum ceiling height of 2.7m in an outdoor enclosed environment. Maximum mounting heights should be strictly followed, otherwise the performance of the units may be reduced.

A minimum clearance of 50mm behind the enclosure must be provided.

The enclosure is manufactured from powder coated steel.

Please refer to the Flush Mount Enclosure Installation Manual for more detailed installation information.

n be used with plaster or timber lined ceiling materials.

SUITABLE FOR

MODEL

THE 1800

THE 2400 THEAC-041 1260 x 240 13

THE 3600 THEAC-042 1860 x 240 1910 x 290 x 125 9

PART No HOLE CUTOUT

DIMENSIONS (mm)

THEAC-040 1030 x 240 1080 x 290 x 125 6

OVERALL

DIMENSIONS (mm)

10 x 290 x 125 8

WEIGHT

(kg)

ROOFING MATERIAL

CONCRETE CEILING

50mm MINIMUM

Flush Mount Enclosure Installation Clearance Dimensions

Shown in the diagrams below are the minimum clearance required for the installation of the Flush Mount Enclosure.

It is imperative that all cables, backing materials, insulation and other materials are keep clear of the back and the sides of the Flush Mount Enclosure. The clearance dimensions are the same for all building rated materials.

HEATER

BRACKET x2

FLUSH MOUNT ENCLOSURE

SIDE OF HOLE

SCREWS, AT EACH END, THERE ARE 6 HOLES WITH A DIAMETER OF 8mm EACH

OFF

"D"

Installation Instructions

Ensure all minimum clearance requirements are met and the materials used are compliant to your local building codes.

MODEL

THE1800

“D”

DISTANCE FROM END

TO BRACKET (mm)

175

Before installing the Flush Mount Enclosure, ensure the site to be fixed is fully prepared with the hole cut the correct size and the mounting points securely in place.

STEP 1: Attach the brackets to the rear of the heater. The dimensions for the spacing of the brackets is listed in the table.

STEP 2: Screw the Flush Mount

Enclosure into the side of the hole. NOTE: screws are not included.

STEP 3: If there is no roof access, connect the heater to the power source, ensure the power is OFF.

THE2400 225

THE3600 300

STEP 4: Lift the heater into the Flush Mount Enclosure ensuring the brackets are to the side of the mounts

STEP 5: Push the heater to the left ensuring the brackets engage in the

mounts. It will then drop in. Shake

the heater to ensure that it is securely mounted.

Extension Mount Bracket

PARALLEL

The Extension Mount bracket allows HEATSTRIP Elegance units to be lowered from high ceilings, using rigid connections. The brackets are for use with 25mm x 25mm x 1mm tube (SHS, and can be supplied as brackets only for customising the length of the drop on site; or supplied as a complete kit with brackets, pre-cut poles and connections. The standard length options as part of the kit are 150mm, 300mm, 600mm and 1200mm.

The kits include all brackets, poles and screws necessary for connection to the heaters, however it does not include screws for attachment to the ceiling.

PART No PACKAGED

DIMENSIONS (mm)

THEAC-043 0.21 6060 AL Kit includes 2x300mm extension pole, screws

THEAC-044 0.38 6060 AL Kit includes 2x600mm extension pole, screws

THEAC-045 0.55 6060 AL Kit includes 2x900mm extension pole, screws

THEAC-046 0.71 6060 AL Kit includes 2x1200mm extension pole, screws

WEIGHT

(kg)

MATERIALS NOTES

and bracket adaptors

Wall Controller with Remote Control

This controller is a custom designed and manufactured controller for HEATSTRIP . It has been designed for ease of use to ensure economic running costs of your heater. It provides a timer for automatic heater operation.

The timer function has four settings. It can turn the heater on for 1 hour, 2 hours, 4 hours or constantly on.

The timer can be operated where it is installed or via remote control unit. It has pre set timing for 1 hour, 2 hours or hours or continuous, allowing the heater to operate continuously. The remote control has a range of 10 metres and must be within line of sight of the wall switch.

Controlling multiple units

It is possible to use one wall controller to control multiple heaters up to 16 Amps load. The wall controller is rated at 16 Amps and 220-240 volts. For larger current draw, it is recommended that you talk to your electrician who can use a relay to connect more units.

Mounting

The TT-MTR is designed to fit into a standard European wall gangbox. It will just as easily fit into a plaster wall. Your electrician can install this device.

The controller needs to be installed according to your local wiring guidelines.

Operation

Press “ON/OFF” button to turn power on and off. Press “TIMER” button to set timer to 1, 2, 4 hours operation. The timer indicator light will show which time setting is

selected. The timer will start the heater and automatically turn it off at the preselected time.

Safety

The TT-MTR controller must be installed in a dry location. It is not suitable for installation where rain or water could affect the unit..

Ensure the connections are properly connected.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or intellectual capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance.

Maintenance

The TT-MTR Controller is made from durable materials, however regular care and maintenance of your controller will help prolong the life of the product.

It is recommended that you dust the controller to keep the surface clean. The cleaning process at least every three months will reduce the amount of build up and keep it looking as best it can.

Do not use any abrasive materials or products to clean the controller, this includes solvents, citrus based cleaners or other harsh cleaning products. Do not use water or a damp cloth to clean the controller.

When handling the controller, ensure that your hands are clean or that you use clean gloves as grease or dirt can mark the surface of the controller.

MODEL MAXIMUM

VOLTAGE (Volts)

TT-MTR 220—240 16 80 x 80 x 42 0.5

MAXIMUM

CURRENT (Amps)

PACKAGED

DIMENSIONS (mm)

WEIGHT (kg)

WALL CONTROLLER INSTALLATION GUIDE

GANG BOX

TT-MTR

WALL

SCREW

Safety

HEATSTRIP Elegance has an IP rating of 55. This means it is safe for water ingress from all directions. The HEATSTRIP can be safely hosed down. HEATSTRIP has undergone extensive testing both in laboratory conditions; in Thermofilm’s manufacturing facility in Melbourne and field trials in Australia and overseas. It has been this testing that gives the purchaser the confidence of a high quality product.

Independent laboratory testing has confirmed Thermofilm’s full compliance with Australian and other International Standards. This includes CE, AS/ANZ, UL/CSE

The heater comes in both plug (1800W, 2400W) and hardwired (3600W) versions. In both cases the fixed wiring must be installed by a licensed electrician in accordance with the relevant wiring regulations.

HEATSTRIP is Class 1 equipment and must be earthed.

In operation, this heater is VERY HOT— do not touch any part of the heater while it is turned on. Do not touch any part until 30 minutes after it is turned off.

Do not allow any cables, furnishings, flammable materials or other items come in contact with any surface of the heater.

If installed in wet areas, the heater switches or controls must be located so that they cannot be touched by persons in the bath or shower.

The heater needs to be installed as per the installation instructions paying special attention to the minimum clearances. The heater needs to be mounted on a rigid bracket or fixing.

The heater must not be mounted immediately below or in front of a socket outlet.

In case of a heater fault or damaged supply lead, the appliance should be returned to the point of purchase for return to Cook & Heat B.V. for repair.

Maintenance

The HEATSTRIP Elegance is made from durable materials, however regular care and maintenance of your heater will help prolong the life of the heater.

It is recommended that you hose down the heater and with a soft bristle brush, gently wipe the surfaces of the heater with a mild detergent to remove the built up contaminants from the environment. Then rinse all detergent off the heater. All chemicals in the atmosphere including cigarette smoke, pollution etc. will tarnish the surface of the heater. In this case, additional cleaning and maintenance may be required. The cleaning process undertaken at least every three months will reduce the amount of build up and keep it looking as best it can. If the heater is in a corrosive environment eg. salt spray, we recommend that you clean your heater with a light spray of fresh water every week. After cleaning, turn the heater on for 20 minutes to dry any water residue and prevent water staining. Before cleaning or inspection activity, the heater must be switched off and cooled down completely. Do not use any abrasive materials or products to clean the heater, this includes solvents, citrus based cleaners or other harsh cleaning products.

When handling the heater, ensure that your hands are clean or that you use clean gloves as grease or dirt can mark the surface of the heater.

Do not use high pressure water to clean heaters, light water spray only.

Warranty Terms & Conditions

The below Warranty Terms and Conditions apply for international warranty only.

Cook & Heat B.V. warrants to the original owner that HEATSTRIP Elegance products will be free from defects in materials and workmanship for a period of 4 years from the date of purchase in accordance with the following warranty terms and conditions.

Provision of this warranty is subject to:

 The HEATSTRIP product must be installed in accordance with the Installation Instructions and relevant electrical

standards and codes.

 The HEATSTRIP product must be maintained and cleaned according to instructions detailed in the Installation Manual.  There is no warranty expressed or implied with regard to capacity requirements. The selection of the unit or units

depends entirely upon the system design and capacities as determined by the purchaser.

 The customer has not repaired, opened or altered the product in any unauthorised manner.  This warranty excludes damage to the product or components arising from circumstances outside the control of Cook &

Heat B.V., including, but not limited to, where the product is not used for intended purpose; where the product has been rectified in any way; incorrect installation; incorrect power supply; damaged caused during delivery; misapplication, misuse, abuse, vandalism, lack of maintenance or accident.

 Cook & Heat’s obligations under this warranty are limited to repair or replacement at Cook & Heat B.V. of any

components of the product which Cook & Heat B.V. identifies to its satisfaction to be defective.

 Transportation charges involved in return of the product to Cook & Heat B.V. is the sole responsibility of the customer.

 All products are inspected and tested before despatch and are at the risk of the purchaser after the shipment from Cook

& Heat B.V., if not delivered by Cook & Heat B.V. to destination.

 Discolouration of the surface may occur after a period of time, this does not constitute a warrantable event.  Twisting and bending of the heaters may occur, this does not constitute a warrantable event.  No products or components will be supplied in advance of an examination of the faulty product or components by Cook &

Heat B.V. or an authorized representative of Cook & Heat B.V.

 Cook & Heat B.V. does not participate in any site related costs or labour expenses incidental to replacement of parts,

repairing, removing, installing, servicing, transportation or handling of parts to complete products, and assumes no liability on parts repaired or replaced without written authorisation. Cook & Heat B.V. shall not be liable for any default or delay in performance of its warranty obligations caused by any circumstances beyond its control, including, but not limited to, judicial or government restrictions, strikes, fires, floods, abnormal weather conditions, delayed supply of components.

Should products be determined as damaged on arrival, immediately notify the transport company of the condition and have them noted on the freight documents. If damage is discovered after unpacking, demand immediate inspection by the transportation company and insist that a record of the damage is made on the freight documentation.

The customer warrants using the product in accordance with:

 Any instructions provided to it by Cook & Heat B.V. from time to time.  All government and local regulations, including but not limited to all relevant electrical, environmental laws and

regulations governing the installation, storage, use, handling and maintenance of the goods.

 All necessary and appropriate precautions and safety measures relating to the installation, storage, use, handling and

maintenance of goods.

DISTRIBUTOR DETAILS FOR EUROPE & UNITED KINGDOM

Distributed by: Manufactured by:

Cook & Heat B.V. Thermofilm Australia Pty. Ltd.

www.heatstrip.eu 17 Johnston Court

Dandenong South, Victoria, 3175 Australia

LEADING HEATING TECHNOLOGY

HANDLEIDING VOOR BEDIENING, INSTALLATIE EN ONDERHOUD

OPERATION, INSTALLATION AND MAINTENANCE MANUAL

HEATSTRIP ELEGANCE - EUROPA

The h e a ter that i s a d e s i g n f e a t u r e !

De heater als de s ig n e l e m e n t !

CONTENTS

Productoverzicht ___________________________ 25 Specificaties _______________________________ 27 Puntverwarmingsprincipe _____________________ 28

Straalrichting ______________________________ 29

Keuzegids _________________________________ 30

Tafelindeling _______________________________ 31

Installatievereisten __________________________ 32

Montage locatie ____________________________ 33

Montagemogelijkheden ______________________ 34 Standaard montagebeugels ___________________ 35 Montagebehuizing voor inbouw (FME) __________ 36

Afmetingen Flush Mount Enclosure __________ 37 Installatie-afstanden Flush Mount Enclosure __ 38

Installatie-instructies _____________________ 39 Verlengde montagebeugel ____________________40 Wand controller timer met afstandsbediening _____41

Installatie wand controller ____________________ 42

Veiligheid en onderhoud _____________________43

Garantievoorwaarden & condities _______________ 44

Productoverzicht

Heatstrip-heaters voor buitenruimtes of moeilijk te verwarmen binnenruimtes

Omdat er buiten of in open binnenruimtes vaak een constante luchtstroom is, zijn veel terraskachels gebaseerd op convectiewarmte waarmee de lucht verwarmd wordt. Dit kan uitermate onpraktisch zijn voor dit soort locaties, omdat de verwarmde lucht eenvoudig weggeblazen kan worden door natuurlijke luchtstromen. Straalkachels verwarmen objecten rechtstreeks door middel van infrarode straling.

Terwijl convectiekachels de lucht tussen objecten verwarmen, verwarmen straalheaters de oppervlakte van de objecten

zelf. HEATSTRIP-straalheaters zijn effectiever in buitenruimtes en niet-geïsoleerde ruimtes omdat ze gericht warmte afgeven aan de mensen en objecten in hun baan.

Discrete, stijlvolle heater voor overdekte buitenruimtes en open binnenruimtes

Dankzij het straalkachelprincipe kan HEATSTRIP effectieve en energiezuinige comfortverwarming leveren voor overdekte buitenruimtes en open binnenruimtes. Dankzij HEATSTRIP kunnen veel uitgaansgelegenheden zoals restaurants, kroegen en clubs dag en nacht en in alle seizoenen gebruik maken van hun terras. Op uw werkplaats of in uw bedrijf kan HEATSTRIP-comfortverwarming bieden voor aangewezen rookplekken en recreatiegebieden, maar ook puntverwarming voor werkplaatsen in fabrieken, magazijnen en showrooms. Thuis kan HEATSTRIPcomfortverwarming bieden onder overkappingen tijdens het buiten eten en barbecueën, of op patio’s, veranda’s, binnenplaatsen en balkons.

Subtiel, minimalistisch design

De stijlvolle, slanke "Off-White" voorkant van de HEATSTRIP niet licht en gloeit tijdens gebruik en is elegant in uw huis. Het plafond, de muur en een paraplu montage opties niet nemen kostbare vloer en tafel ruimte.

Er zijn vier verschillende productseries in de Heatstrip-productcategorie. Ze hebben elk een verschillende temperatuuroutput, waardoor ze geschikt zijn voor verschillende toepassingen. Hieronder vindt u een lijst met veelvoorkomende toepassingen om u te helpen de effectiefste en efficiëntste serie te kiezen. Dit is slechts een algemene gids; raadpleeg de producthandleiding voor elk product voor meer informatie.

HEATSTRIP Max (THX-modellen is een heater met extreem hoge temperatuur voor niet-overdekte of open gebieden met een montagehoogte van 2,4 m tot 3,5 m.

HEATSTRIP Design / Elegance (THH- THE modellen is een premium heater met hoge temperatuur en is vooral bedoeld voor buitenruimtes met 1, 2, 3 of 4 afgesloten zijden en met een ideale montagehoogte van 2,1 m tot 2,7 m.

HEATSTRIP Indoor (THS-modellen) is een heater met een gemiddelde intensiteit voor toepassingen in beschermde binnenruimtes.

TOEPASSING

Geïsoleerde binnenruimtes, klaslokalen, kantoren, badkamers, vochtige gebieden, droogruimtes

Buiten overdekt, café, veranda, patio, balkon met plafond van 3 m of lager

THX

√

THH

√ √

√

THE

√

THS

√

Buiten overdekt, café, veranda, patio, balkon met plafond van 3 m of hoger

Zeer open terrein buiten

Open ruimte binnen, magazijn, fabriek, productiefaciliteit, sportfaciliteiten

Puntverwarming binnen, boven tafels, montageruimtes

√

√ √

√

Efficiënte, kosteneffectieve elektrische verwarming

Het innovatieve design van de HEATSTRIP zorgt voor een comfortabele en gelijkmatige warmteverspreiding vanaf de oppervlakte met minimale gebruikskosten.

Flexibel design

Er zijn 4 HEATSTRIP Elegance modellen beschikbaar, zodat voldaan kan worden aan de verwarmingseisen voor elke

buitenruimte of open binnenruimte. Beugels voor montage aan de muur of het plafond worden standaard meegeleverd. Optionele HEATSTRIP-accessoires zijn onder andere balkbeugels en vaste parasolbeugels, verlengde beugels, kettingbeugels, dubbele montagebeugels en montageomhulsels voor inbouw.

Geproduceerd in Australië

De HEATSTRIP is ontworpen,

geproduceerd en geassembleerd in Australië.

Aantrekkelijke HEATSTRIP Elegance wordt standaard geleverd met een "OffWhite" voorkant en achterkant van geanodiseerd aluminium met "Off- White" coating.

Eenvoudig in gebruik

De HEATSTRIP wordt bediend door een eenvoudige aan/uit-schakelaar. Hij

kan rechtstreeks op het stopcontact

aangesloten worden of permanent aangesloten worden via een in de muur geplaatste aan/uit-schakelaar. De unit heeft ongeveer vijf minuten nodig om tot de maximale temperatuur op te warmen en ongeveer dertig minuten om af te koelen, afhankelijk van de omgevingstemperatuur. Vergeet niet de unit uit te schakelen.

Specificaties

MODEL POWER

ATTS)

THE1800EU 1800

THE2400EU 2400

THE3600EU 3600 15 1804 x 170 x 48.5

THE1800UK

THE2400UK

THE3600UK

1800 7.5 974x 170 x 48.5 4 1000

2400

3600

ACTUEEL

(AMPS)

7.5

DIMENSIES

(mm)

974x 170 x 48.5

1204 x 170 x 48.5

1804 x 170 x 48.5

GEWICHT

(Kg)

9 1000

MODEL

TYPE HEATER

Hangende elektrische heater met hoge intensiteit en grote geprofileerde oppervlakte van geanodiseerd aluminium.

OUTPUT

SPANNING 230-240 volt nominaal bij 50-60 Hertz, 1-fase

VERBINDING 3-aderige kabel 2,5 mm

KEURMERKEN AUSTRALIË/CE

Zie bovenstaande modeltabel

kabellengte

(mm)

1000

PLUG

YES

SPANNING

(VOLTS)

230

240

MONTAGEHOOGTE MINIMAAL

AANBEVOLEN MAXIMAAL

MONTAGEMOGELIJKHEDEN

Geschikt voor montage aan plafond, muur of balk. Geschikt voor vaste

2.1 m

2.4 m to 2.7 m

3.0 m (voor hogere plafonds kunnen units verlaagd

worden met optionele beugelsets of het gamma van Heatstrip Max)

parasol- of inbouwmontage. Ook geschikt voor verlengde montage met

behulp van stijve bevestigingsbuizen en kettingbeugels.

BESCHERMINGSGRAAD IP55-bescherming tegen indringing van water uit alle richtingen

LAND VAN HERKOMST Australië

+ 61 hidden pages

HEATSTRIP THE1800EU, THE1800UK, THE3600EU, THE2400EU, THE3600UK Operation, Installation, And Maintenance Manual

Specifications and Main Features

Frequently Asked Questions

User Manual