Heatstore HSAC3 Operating Instructions Manual

Telephone: [phone] Fax: [phone]
Victoria Road, Avonmouth, Bristol BS11 9DB

www.heatstore.co.uk

IMPORTANT SAFEGUARDS

WHEN USING ANY ELECTRICAL APPLIANCE, BASIC SAFETY

PRECAUTIONS SHOULD ALWAYS BE FOLLOWED.

PLEASE READ ALL INSTRUCTIONS CAREFULLY

AND RETAIN FOR FUTURE REFERENCE.

ISSUE 1: 0616

HSAC3 Air Curtain

Operating Instructions

3kW Air Curtain with ‘half power’ setting

and air circulation mode

HSAC3[16]instructions 9/6/16 09:18 Page 1

Usage and product description

The air curtain is designed to prevent the entry of the cold ambient air into

a building and to reduce the thermal losses inside the premises. The

curtain is designed for the operation in premises with the ambient

temperature of from -10°C to +40°C and the relative humidity up to 80%

(at the temperature +25°C).

The HSAC3 is manufactured from sheet steel coated with a high-quality

polymer. The ‘body’ of the unit contains heating elements, the fan modules

and the control switches. The fans draw in the air through the front

perforated grid of the body (2); the airflow passing through the heating

elements is heated, enters the ventilation assembly and released through

the air-relief nozzle (3) as the directed flow.

The HSAC3 also has a cool air circulation function in addition to ‘full’ and

’half’ power heating functions.

Before Installation

Select a suitable position for installation, allowing free access all around

and no closer than 100mm to the ceiling. For wide doorways, these units

may be mounted end-to-end, but allowing a suitable gap for the mounting

brackets if these are used, and for access and cable entry.

Installation

The HSAC3 may be fixed directly to the surface above an entry or for

greater operational flexibility may be installed using the supplied mounting

brackets. See overleaf for details.

Model covered by these instructions:

HSAC3 – 3kW Air Curtain with ‘half-power’ setting and air circulation

mode

Safety Instructions

• Please read these installation and operating
instructions before using the product. Failure to do so
may cause injury or void the warranty.

• This Air Curtain is NOT suitable for installation in a
hostile environment.

• DO NOT operate the heat curtain in premises with
the relative humidity >80%.

• The heater MUST be earthed when installed.

• DO NOT switch on the heater if the covers are
removed.

• If the curtain is connected directly to the fixed wiring it
must be provided with an automatic circuit breaker or
tripping device.

• ALWAYS conform to the general safety rules for
electrical devices.

• DO NOT cover the unit and do not limit the air flow
at the inlet and outlet,

• DO NOT operate the unit if there is visible damage to
the unit or power supply.

• Only a suitable qualified person should install and
maintain the unit, otherwise there may be a risk of,
electric shock or fire.

• To avoid electric shock disconnect the device from the
power mains before starting cleaning or maintaining.

32

Figure 1

Dimensions

L = 585mm

A = 450mm

B = 65mm

C = 30mm

E = 155mm

F = 150mm

HSAC3[16]instructions 9/6/16 09:18 Page 2