Heatstore HS5900 Operating Instructions Manual

HS5900 Tornado S

Hi-Speed Hand Dryer

Operating Instructions

SPECIFICATION: HEATSTORE TORNADO S
Electrical: Cool: 800W or hot:1650W; 220/240V; 50Hz;

Air Speed: 95m/s ±5%;
Drying Time: 5-10 seconds;
Dimensions/Weight: 730(h) x 300(w) x 222 mm; 13kG

Sound level: 75dB

This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and collection systems
or contact the retailer where the product was purchased. They can take this product for
environmental safe recycling.

Telephone: [phone] Fax: [phone]
Unit 12, Access 18, Bristol BS11 8HT

www.heatstore.co.uk

ISSUE 1/0318

IMPORTANT SAFEGUARDS

WHEN USING ANY ELECTRICAL APPLIANCE, BASIC SAFETY

PRECAUTIONS SHOULD ALWAYS BE FOLLOWED.

PLEASE READ ALL INSTRUCTIONS CAREFULLY

AND RETAIN FOR FUTURE REFERENCE

IF IN ANY DOUBT ABOUT THE INSTALLATION OR USE OF THIS

PRODUCT, CONSULT A COMPETENT ELECTRICIAN.

Important Safety Warnings

injury can occur if used improperly

Don’t open the front panel.

Prohibited

The HS5900 TORNADO S is a stylish stainless steel, hi-speed hand dryer with
auto-element switching and tamper-proof controls.

Components:

Cover

Key

Power Switch

Body

Important Safety Information – Please Read before Proceeding

The information contained in these installation instructions must be read carefully
before any attempt to install the hand dryer.

Failure to accurately follow these instructions may result in the incorrect operation of
the unit, damage to property and/or personal injury.

Heatstore will not be held liable for any damage to property or personal injury as a
result of failure to comply with the instructions contained herein.

All electrical installation and repair work should be carried out by a qualified
electrician in accordance with current UK IEE regulations and any local codes or
regulations.

Any maintenance to this appliance should be carried out by a qualified electrician.
This product must be earthed.
Isolate power to the device before installation or servicing.
Check that the electrical supply corresponds to that shown on the rating plate on the

device.
NOT to be used for any purpose other than drying hands.

Technical Data:

Rated voltage AC 220-240V

AC 110/127V

Rated frequency 50/60HZ Heating conditions Ambient temperature <23

Rated power 1650W Air speed 95m/s

Motor power 800W Drying time 5-10s

Weight 13KG Overall size(mm) 300x222x730

WATERPROOF
GRADE

IPX4

Wall Bracket

Screws

Plugs

Draininage
Tank

Air Filter

2

3