Heatstar F170250, F170275 User Manual

Page 1
Workin’
Warm.
Workin’
Tough.
1
Page 2
Small Jobsites
Model # Description
F170250 HS50K 50,000 BTU/HR
F170275 HS75KT 75,000BTU/HR
STANDARD FEATURES:
• Heavy Construction - Illuminated On-Off Switch - 115 V 60Hz
• Flame Safety/Overheat Safety Shutoff
• Enclosed Motor - Fuel Gauge • Continuous Ignition
• Cord Wrap (HS75KT only) - High Output Fan
• Larger “Glove-Friendly” Controls
• CSA Certified
Large Jobsites
Model # Description
F170325 HS125KT 125,000 BTU/HR
F170375 HS175KT 175,000 BRU/HR
F170380 HS210KT 210,000 BTU/HR
THE ONLY HEAVY DUTY
KEROSENE HEATER
BUILT FOR THE JOBSITE
STANDARD FEATURES:
• Heavy Construction - Illuminated On-Off Switch -115 V 60Hz
• Flame Safety/Overheat Safety Shutoff
• Enclosed Motor - Fuel Gauge - High Output Fan • Continuous Ignition
• Large Heavy-Duty Handles w/cord wrap
• 10” Pneumatic Tires
• Larger “Glove-Friendly” Controls
• CSA Certified
Big Projects
Model # Description
F151089 HS3500DF 360,000 BTU/HR
F151100 HS6000DF 610,000 BTU/HR
STANDARD FEATURES:
• Heavy Construction - Built-In Oil Burner - 115 V 60Hz
• Flame Safety/Overheat Safety Shutoff
• Electronic Flame Control System • Continuous Ignition
• Stainless Steel Heat Exchanger
• High Output Fan
• Pre-Heated Oil Filter (HS6000DF only) - Pre-Purge And Ventilation Cycles
• Optional Remote Thermostat • CSA Certified
SPECIFICATIONS: HS50K HS75KT HS125KT HS175KR HS210KT HS3500DF HS6000DF
Stock Number F170250 F170275 F170325 F170375 F170380 F151089 F151100
Output (BTU/HR) 50,000 75,000 125,000 175,000 210,000 360,000 610,000
Heang Area (SQ. FT.) 1,200 1,750 3,000 4,250 6,000 9,400/75,000 14,250/114,000
CFM Output 165 240 275 400 400 1,800 2,800
Fuel Consumpon (GAL/HR-L/HR) .38/1.43 .56/2.11 .77/2.91 1.15/4.35 1.60/6.05 2.75/10.41 4.4/16.65
Tank Capacity (GAL-L) 4/15 6/22 14/52 14/52 14/52 27.7/104 35.6/134
Tires/Wheels NA NA 10” Pneumac 10” Pneumac 10” Pneumac 10” Pneumac 10” Pneumac
Operang Hours On Full Tank 11 11 15 10 8 9.5 8.6
Shipping Size (L x W x H) 32” x 14” x 14.5” 32” x 14.25” x 17” 42” x 18” x 22” 42” x 18” x 22” 42” x 18” x 22” 66” x 27” x 39” 76” x 27” x 39”
HEAVY DUTY PORTABLE DIRECT-FIRED FORCED AIR HEATERS
Shipping Weight 43 lbs. 43 lbs. 74 lbs. 81 lbs. 87 lbs. 227 lbs. 247 lbs.
Mul-Fuel (No. 1 Or No. 2 Diesel
Oil, Kerosene, JP-8 Or Jet A)
Oponal Remote Thermostat NA NA NA NA NA F150035 F150035
Yes Yes Yes Yes Yes Yes Yes
2
Page 3
Large Jobsites
Model # Description Fuel
F151010 HS1000ID 110,000 BTU/HR
F151020 HS2000ID 205,000 BTU/HR Oil
F151030 HS3000ID 300,000 BTU/HR Oil
F151040 HS4000ID-HD 400,000 BTU/HR Oil With 2-Stage Burner
F151092 HS4000IDG-HD 380,000 BTU/HR Dual-Fuel: Natural Gas/LP
HEAVY DUTY PORTABLE INDIRECT-FIRED FORCED AIR HEATERS
Oil
CSA Certified
HS1000ID
F151010
SPECIFICATIONS: HS1000ID HS2000ID HS3000ID HS4000ID-HD HS4000IDG-HD
Operang Hours On Full
Oil Fuel Consumpon (GAL/
LP Fuel Consumpon (GAL/
NG Fuel Consumpon
Tank Capacity (GAL)
Max Lenght Of Duct
Shipping Size (L x W x H)
Duct Adapter
Stock Number
LP/NG Burner
Oil Burner
Input (BTU/HR)
CFM Output
Tank
HR-L/R)
HR-L/R)
(CUBIC/FT)
Fuel Type
Power Required
Duct Diameter
Shipping Weight (LBS)
HS2000ID
F151020
F151010 F151020 F151030 F151040 F151092
NA NA NA NA Included
Included Included Included Included NA
110,000 205,000 300,000 400,000 380,000
880 1,530 2,500 2,760 3,250
12 11 12.5 15 NA
0.81/3.06 1.56/5.90 2.18/8.25 2.68/10.14 NA
NA NA NA NA 4.2/15.89
NA NA NA NA 380
Oil Oil Oil Oil NG/LP
11.9 17.2 27.7 57 NA
115V 115V 115V 115V 115V
12” 14” 16” 20” 20”
25 50 50 100 100
47” x 18” x 27” 9” x 21” x 42” 76” x 29” x 46” 70” x 29” x 50” 72” x 30” x 31”
94 176 264 330 306
Heat Duct Shown With Optional Duct Adapter
HS3000ID
F151030
Dual Duct Adapter
Remote Thermostat w/32” cord
HS4000IDHD
F151040
OPTIONAL ACCESSORIES: HS1000ID HS2000ID HS3000ID HS4000ID-HD HS4000IDG-HD
Duct Adapter F151015 (12”) F151025 (14”) F15035 (16”) F151045 (20”) F151045 (20”)
Dual Duct Adapter 2-12* NA F151052 F151032 NA NA
Dual Duct Adapter 2-16* NA NA NA F151042 F151042
3-Way Duct Adapter 3-12” NA NA NA F151043 F151043
Flexible Heat Duct (25Ft.)
12” F150040 F150040 F150040 F150040 F150040
14” NA F150043 NA NA NA
16” NA NA F150050 F150050 F150050
20” NA NA NA F151084 F151084
Remote Thermostat F150035 F150035 F150035 F150035 F150035
Li Bracket Kit F150031 F150031 F150031 Included Included
External Tank Kit F150032 F150032 F150032 F150032 NA
Oil Fuel Tank Included Included Included Included NA
Heavy-Duty Frame And
Wheel Kit
NA NA F150285 Included Included
3
Page 4
new stronger design
built for the jobsite
SMALL WORKSITES
Model # Description Heats Up To Operates Up To
F170035 HS35FA 35,000 BTU/HR 800 Sq. Ft. 12 hrs. on a 20 lb. tank
F170060 HS60FAV 30,000-60,000 BTU/HR 1,250 Sq. Ft. 14 hrs. on a 20 lb. tank
F170085 HS85FAV 50,000-85,000 BTU/HR 2,000 Sq. Ft. 8 hrs. on a 20 lb. tank
F170125 HS125FAV 75,000-125,000 BTU/HR 3,000 Sq. Ft. 11 hrs. on a 40 lb. tank
LARGE JOBSITES
Model # Description Heats Up To Operates Up To
F170170 HS170FAVT 125,000-170,000 BTU/HR 4,000 Sq. Ft. 17 hrs. on a 100 lb. tank
F170180 HS170NG 150,000 BTU/HR 3,500 Sq. Ft. Natural Gas
F172425 HS400FAVT 250,000-400,000 BTU/HR 9,000 Sq. Ft. 17 hrs. on (2) 100 lb. tanks
CSA Certified
HS35FA
F170035
SPECIFICATIONS:
Stock Number F170035 F170060 F170085 F170125 F170170 F170180 F172425
Output (BTU/HR_ 35,000 30,000-60,000 50,000-85,000 75,000-125,000 125,000-170,000 150,000 250,000-400,000
Output CFM 100 300 300 350 450 450 1400
Fuel Propane Gas Propane Gas Propane Gas Propane Gas Propane Gas Natural Gas Propane Gas
Min. LP Tank Size 20 lb. 20 lb. 20 lb. 40 lb. 100 lb. NA 100 lb.
Fuel Consumpon (lbs/hr) 1.6 1.2 to 2.08 2.3 to 3.9 3.5 to 5.8 5.8 to 7.8 138 cub. ./r. (NG) 11.5 to 18.5
Pressure Regulator Sengs 10 PSI 28” W.C. 28” W.C. 28” W.C. 28” W.C. 4” W.C. 20 PSI
Adjustable Height Control - Yes Yes Yes Ye s Ye s -
Flame Safety Ye s Yes Ye s Ye s Ye s Ye s Ye s
High Temperature Limit
Propane Hose-20.
POL/Excess Flow Check Valve Yes Yes Ye s Yes Yes NA Yes
Shipping Size (L x W x H) 19” x 11.5” x 14” 18.5” x 11.5” x 14” 21” x 11.5” x 16” 20.25” x 12” x 15.5” 26.5” x 11.5” x 16.75” 26.5” x 11.5” x 16.75” 38.58” x 15” x 22.25”
Net Weight ( Includes Hose/
Regulator/POL Assembly)
Switch
Ignion Piezo Connuous Connuous Connuous Automac Solid State Automac Solid State Automac Solid State
Thermostat - - - - Built-in Built-in Built-in
Power Required 115 V. 60 Hz 3a 115 V. 60 Hz 3a 115 V. 60 Hz 3a 115 V. 60 Hz 3a 115 V. 60 4a 115 V. 60 4a 115 V. 60 4a
1/4” I.D. w/Regulator
Shipping Weight 17 lbs. 20 lbs. 20 lbs. 25 lbs. 34 lbs. 34 lbs. 51 lbs.
Shipping Cube 1.8’ 1.7’ 2.2’ 2.7’ 3.0’ 3.0’ 7.5’
HS125FAV
F170125
HA35FA HS60FAV HS85FAV HS125FAV HS170FAV HS170NG HS400FAVT
240 F 240 F 240 F 240 F 240 F 240 F 240 F
and POL
15 lbs. 16lbs. 18 lbs. 23 lbs. 32 lbs. 32 lbs. 47 lbs.
3/8” I.D w/Regulator
and POL
HS170FAVT
F170170
3/8” I.D. w/Regulator
and POL
3/8” I.D. w/Regulator
and POL
3/8” I.D. w/Regulator
and POL
HS400FAVT
F172425
NA
1/4” I.D. w/Regulator
and POL
PORTABLE PROPANE AND NATURAL GAS FORCED AIR HEATERS
4
Page 5
Quiet Burner Technology®
delivers 50% less noise
CORDLESS FORCED AIR HEATERS
Model # Description Heats Up To Operates Up To
F227900 MH35CLP 35,000 BTU/HR 800 Sq. Ft. 8 hrs. on a single charge
SPECIFICATIONS:
Stock Number F227900
BTU/HR Output 35,000
Fuel Propane
Min. Tank Size 20 lbs
Tank Connecon 10’ hose and reg.
Shipping Size L 17” x W 10” x H 14”
Weight 17 lbs
MH35CLP
Model # Description Heats Up To Operates Up To
F128835 HS60CLP 30-60,000 BTU/HR 1,250 Sq. Ft. 4 hrs. on a single charge
SPECIFICATIONS:
Stock Number
BTU/HR Output
Fuel
Min. Tank Size
Tank Connecon
Shipping Size
Weight
HS60CLP
F128835
30-60,000
Propane
20 lbs
10’ hose and reg.
L 12” x W 21” x H 16”
22 lbs
CONVECTION SMALL WORKSITES
Model # Description Heats Up To Operates Up To
F170470 HS80CVX - 30,000-80,000 BTU/HR 1,900 Sq. Ft. 14 hrs. on a 20 lb. tank
F170485 HS80NG - 60,000 BTU/HR 1,400 Sq. Ft. Natural Gas
STANDARD FEATURES:
• Replaceable 12 Volt sealed lead acid battery
• Operates 8 Hours on a single charge
• Built in battery charger/Electronic ignition
• Recharges in 5 Hours
• Operates while charging
• Quiet burn technology (50% quieter than standard model)
STANDARD FEATURES:
• Same as HS35CLP
• Operates 4 Hours on a single charge
• Extra battery (F227964) extend run time to 8 hrs
CORDLESS FORCED AIR LP HEATERS
CONVECTION LARGE JOBSITES
Model # Description Heats Up To Operates Up To
F170475 HS200CVX - 75,000-200,000 BTU/HR 4,700 Sq. Ft. 29 hrs. on a 100 lb. tank
SPECIFICATIONS: HS80CVX HS80NG HS200CVX
Stock Number F170470 F170485 F170475
Output (BTU/HR) 30,000-80,000 60,000 75,000-200,000
Fuel Propane Gas Natural Gas Propane Gas
Propane Consumpon (lbs/hr) 1.4 to 3.7 - 3.5 to 9.3
Pressure Regulator Sengs 11” W.C. 6” W.C. 10 PSI
Flame Safety* Thermocouple Operated Gas Valve Thermocouple Operated Gas Valve Thermocouple Operated Gas Valve
Standing Pilot Yes Yes Yes
Ignion Piezo Piezo Piezo
Power Required None None None
Hose 20. 3/8” I.D. w/Regulator and POL NA w/Natural Gas 1/4” I.D. w/Regulator and POL
POL/Excess Flow Check Valve Ye s NA w/Natural Gas Yes
Shipping Size (L x W x H) 15.25” x 18.25” x 21.75” 15.25” x 18.25” x 21.75” 18.25” x 15” x 27.5”
Net Weight (Includes Hose/Regulator/
POL Assembly)
Shipping Weight 21 lbs. 21 lbs. 27 lbs.
Shipping Cube 3.50 3.50 4.36
19 lbs. 19 lbs. 25 lbs.
CSA Certified
5
Page 6
OIL FIRED RADIANT HEATER
Model # Description
F151500 HS155IR 155,000 BTU/HR
F151490 HS115IR, 115,000 BTU/HR
STANDARD FEATURES:
• Radiant Heat with No Air Movement
• Heavy Duty Construction
• Low Noise Level
• Single Point Bail Lift
• Odor Free
• Kerosene, Diesel, Fuel Oil
• AISI 430 Stainless Steel Combustion Chamber
• Shock Proof Fuel Tank
• Adjustable Floor-Heat Shield
• CSA Certified
new stronger design
built for the jobsite
SPECIFICATIONS:
Stock Number F151500 F151490
BTU/HR Output 155,000 115,000
Fuel Tank 17 Gallons 11.4 Gallons
Run Time 16 Hrs 13.4 Hrs
Electric 120 V 120 V
Running Amps 4.1 Amps 2.15 Amps
Weight 161 lbs 104 Lbs
Size L 40” X W 28” X H 41” L 35” x W 21” x H 32”
HS155IR HS115IR
DUAL FUEL DIRECT FIRED
Model # Description
F151200 HS4000NG/LP 400,000 BTU/HR
STANDARD FEATURES:
• Dual Fuel Natural Gas/Propane
• Simple gas valve switch to change fuels and safety locking device to keep valve in set position
• 20” Duct-Ductable up to 50’
• Clean Burn with Very Low (CO, and NOx)
• Approved for construction, greenhouses and brooders
• Duct and duct adapter optional
• Remote thermostat with 30’ cord optional
• Ventilation only mode (Fan can be operated when burner is off)
• CSA Certified
CSA Certified
SPECIFICATIONS:
BTU/HR Output 400,000
DUAL FUEL DIRECT FIRED OIL FIRED RADIANT HEATER
6
HS4000NG/LP
Stock Number F151200
Electric 120 V
Output CFM 4,120
Running Amps 8.5 Amps
Weight 192 lbs
Size L 56” x W 24” x H 33”
Shown with optional Duct
and Duct Adapter
CSA Certified
Dual Fuel Gas Valve
Page 7
PROPANE TANK TOPS/TORCHES PORTABLE PROPANE/NATURAL GAS HEATERS
PROPANE RADIANT HEATERS
Model # Description
F242100 MH15T 8,000-15,000 BTU/HR
F242650 MH30T 8,000-30,000 BTU/HR
F242915 MH45T 8,000-45,000 BTU/HR
MH15T
Variable Output Of: 8,000-15,000 BTU/HR
Hi-Medium-Low Regulator
CSA Certified
MH30T
Variable Output Of: 8,000-30,000 BTU/HR
Hi-Medium-Low Regulator Run one burner or two
CSA Certified
MH45T
Variable Output Of: 8,000-4 5,000 BTU/HR
Hi-Medium-Low regulator Run one, two or three burners
Piezo
ignition
PROPANE TORCHES
Model # Description
F272601 MH400PT
F272602 MH500LPT
F272603 MH500DPT
A B C
Ergonomic grip handle
with squeeze trigger
Ergonomic
grip handle
SMALL WORKSITES
SPECIFICATIONS:
Stock Number F170700 F170800 F170850
Output (BTU/HR) 35,000 125,000 125,000
Fuel Propane Propane Natural Gas
Propane Consumpon (LBS/HR) 1.6 max 5.8 max N/A with Natural Gas
Pressure Regulator Sengs 22” w.c. 13.5” w.c. 7” w.c.
Flame Safety Thermocouple Operated Gas Valve Thermocouple Operated Gas Valve Thermocouple Operated Gas Valve
Ignion Piezo Piezo Piezo
Power Required None None None
Hose/Regulator 20’ with Regulator 20’ with Regulator Regulator Only
P.O.L./Excess Flow Check Valve Yes Yes NA
Shipping Size (L x W x H) 12.4” x 10.24” x 34.25” 16.14” x 16.14” x 35.04” 16.14” x 16.14” x 35.04”
Shipping Weight (LBS) 25 42 42
Shipping Cube 1.85 4.24 4.24
CSA Certified
HS35LP
35,000 BTU/HR
F170700
Heats up to 800 square feet. Operates up to 12 hours on a 20 lb. tank.
Tip-Over Switch Safety Shut-Off P.O.L. Connection 20 Ft. Hose with Regulator Fully Assembled and Ready To Use
HS35LP HS125LP HS125NG
A
MH500DPT
Hand Held Torch
F272603
36” handle w/molded arm support
Piezo Ignition
10’ hose
CSA certified
LARGE JOBSITES
B
MH500LPT
Hand Held Torch
F272602
Ergonomic grip
36” handle
10’ hose & striker
CSA certified
HS125LP
125,000 BTU/HR
F170800
Heats up to 3,000 square feet. Operates up to 17 hours on a 100 lb. tank.
Tip-Over Switch 20 Ft. Hose with Regulator Welded Frame Heat Shield Safety Shut-Off
C
MH400PT
Hand Held Torch
Needle valve adjustment
31” total length
CSA certified
HS125NG
125,000 BTU/HR
F170850
Heats up to 3,000 square feet. Operates on Natural Gas.
Tip-Over Switch Welded Frame Heat Shield Safety Shut-Off
CSA Certified
F272601
10’ hose
7
Page 8
FAK Replacement Parts
Model # Description
F221899 Nozzle Kit
Replaces part # 27416 & 22201
HEATSTAR: HS50KT (03-current) MR. HEATER
EWA LT : DXH50K (13-current)
D
Model # Description
F221900 Nozzle Kit
Replaces part # 28741 & 22202
HEATSTAR: HS75KT (03-current) MR. HEATER
EWA LT : DXH75KT (13-current)
D
Model # Description
FAK REPLACEMENT PARTS
F221901 Nozzle Kit
Replaces part # 28742 & 22203
: MH50KT (03-08)
: MH75KT (03-08)
Model # Description
F227416 Nozzle Kit
Replaces part # 27416 & 28710
MR. HEATER: MH50KR (09-current)
Model # Description
F221878 Nozzle Kit
Replaces part # 28741 & 28711
MR. HEATER: MH75KTR (09-current)
Model # Description
F221879 Nozzle Kit
Replaces part # 28742 & 28712
HEATSTAR: HS125KT (03-current) MR. HEATER
Model # Description
F221902 Nozzle Kit
Replaces part # 28743 & 22204
HEATSTAR: HS175KT (03- current) MR. HEATER
Model # Description
F221903 Nozzle Kit
Replaces part # 22109 & 22205
HEATSTAR: MR. HEATER
: MH125KT (03-08)
: MH175KT (03-08)
HS210KT (03-current)
: MH210KT (03-08)
MR. HEATER: MH125KTR (09-current)
EWA LT : DXH135KT, DXH135HD (13-current)
D
Model # Description
F221889 Nozzle Kit
Replaces part # 28743 & 28713
MR. HEATER: MH175KTR (09-current)
Model # Description
F221891 Nozzle Kit
Replaces part # 22109 & 28714
MR. HEATER: MH210KTR (09-current)
EWA LT : DXH185KT, DXH190HD, DXH215HD(13-current)
D
8
Page 9
FAK/LP Replacement Parts
Model # Description
F221887
MR. HEATER: MH50KTR, MH75KTR, MH125KTR, MH175KTR, MH210KTR CONTRACTOR SERIES: CONTRACTOR PLUS: HEATSTAR:
Model # Description
MR. HEATER HEATSTAR:
ALL PRO: SPC-K50, SPC-K100,
SPC-K150
UNIVERSAL:
K100-FA, K150-FAT
NOTE: For Mr Heater/Heatstar 2003/04 production models
HS50KT, HS75KT, HS125KT, HS175KT
F263015 Replacement Filter Kit
HS50KT, HS75KT, HS125KT, HS175KT
K50-FA,
PA50KR, PA75KTR, PA175KTR, PA210KTR
: MH50KT, MH75KT, MH125KT, MH175KT
Replacement Filter Kit
(2009 models through current)
TS75KR, TS125KTR, TS175KTR, TS210KTR
Model # Description
F263016
MR. HEATER: MH50KT, MH75KT, MH125KT, MH175KT, MH210KT
HEATSTAR:
HS175KT, HS210KT
Model # Description
MR. HEATER HEATSTAR:
Replaces part #21803
HS50KT, HS75KT, HS125KT,
F221803 Electrode Kit (2005 models and prior)
: MH50KT, MH75KT, MH125KT, MH175KT
HS50KT, HS75KT, HS125KT, HS175KT
Replacement Filter Kit
(2005 models through 2008)
FAK REPLACEMENT PARTS
Model # Description
F226831 Rotor Kit (2003 models through current)
MR. HEATER HEATSTAR:
ALL PRO: SPC-, SPC-K50, SPC-K100, SPC-K125,
SPC-K150, SPC-K175 UNIVERSAL: K50-FA, K75, K100-FAT, K125, K150-FAT, K175
Model # Description
F221857
MR. HEATER: MH50KT, MH75KT, MH125KT, MH175KT, MH210KT MR. HEATER HEATSTAR:
: MH50KT, MH75KT, MH125KT, MH175KT
HS50KT, HS75KT, HS125KT, HS175KT
Electrode Kit
(Kerosene 2006 models through current)
: MH50KR, MH75KTR, MH125KTR, MH175KT, MH210KT
HS50KT, HS75KT, HS125KT, HS175KT, HS210KT
Model # Description
F226865 Flame Sensor Kit
MR. HEATER
All Mr Heater 2003 - 2008
HEATSTAR:
EWA LT
D
Replaces part #s: 26903 26924 26925 26920
Model # Description
F266842
MR. HEATER MR. HEATER
(2009-present)
HEATSTAR: ALL PRO: SPC-K50, SPC-K100, SPC-K150 UNIVERSAL: K50-FA, K100-FA, K150-FA
: MH50KR and MH75KTR (2009-current)
All Models
®
: All Models
Pump Adjustment Kit
(2003 models through current)
: MH50KT, MH75KT, MH125KT, MH175KT(2003-2008) : MH50KR, MH75KTR, MH125KTR, MH175KTR, MH210KTR
HS50KT, HS75KT, HS125KT, HS175KT
Replaces part #21819 and 22144
9
Page 10
LP Replacement Parts
SPARK PLUG
Model # Description
F228794 Spark Plug
Replaces part #28774
MR. HEATER: MH170FAVT HEATSTAR:
SPARK PLUG
Model # Description
F228795 Spark Plug
Replaces part #21083
MR. HEATER: MH85FAV (2003-08), MH125FAV (2003-CURRENT) HEATSTAR:
HS170FAVT
HS85FAV (2003-08), HS125FAV (2003-CURRENT)
LP REPLACEMENT PARTS
HIGH LIMIT SWITCH
Model # Description
F228797 High Limit Switch
Replaces part #21751
MR. HEATER: MH55FAV, MH85FAV HEATSTAR:
HS55FAV, HS85FAV
HIGH LIMIT SWITCH
Model # Description
F228798 High Limit Switch
Replaces part #22003
MR. HEATER: MH125FAV HEATSTAR:
HS125FAV
HIGH LIMIT SWITCH
Model # Description
F228796 High Limit Switch
Replaces part #26168
MR. HEATER: MH35FA, MH170FAVT, MH400FAVT HEATSTAR:
10
HS35FA, HS170FAVT, MH400FAVT
Page 11
UNIVERSAL FUEL FILTER
Accessories
Model # Description
F273699 Universal Fuel Filter
Required for use with all Portable Buddy and Big Buddy Heaters when attaching to a 20 lb. propane tank. Most commonly used with F273701(5’) and F273702(12’) Hose Assemblies
THERMOSTAT
Model # Description
F261210 Thermostat - For portable kerosene (50KR only)
For portable Kerosene (50KR ONLY)
6v/800mA POWER ADAPTER
Model # Description
F276127 6v/800mA Power Adapter
Use with Big Buddy and Tough Buddy heaters. Uses standard 110 outlet. Also powers products requiring 6VDC and up to 800mA current.
LP ACCESSORIES
2 TANK HOOK UP KIT
Model # Description
F273737 2 Tank Hook Up Kit
(30” Hose Assembly with Excess Flow Soft Nose P.O.L.’s on both ends x Full Flow Tee) - Most commonly used to hook multiple bulk tanks to most applications.
TANK FOOT
Model # Description
F275228 Tank Foot (1 lb. propane cylinder)
(Fits 1 lb. propane cylinder) Fits portable throw-away propane cylinders; reduces risk of tipping cylinder while in use.
TANK FOOT
Model # Description
F273169-6
F273169-30 TankFoot® Tank Stabilizer (30)
TankFoot® Tank Stabilizer (6)
Fits 20lb., 30lb. and 40lb. cylinders; reduces risk of tipping cylinder while on jobsite and transporting in your R.V., pick-up, car, etc.
11
Page 12
Reference Information
HOW MUCH HEAT DO YOU NEED?
You can calculate the amount of BTUs required by using the following method:
DESIRED INSIDE TEMPERATURE
- OUTSIDE TEMPERATURE
= TEMPERATURE INCREASE
1. Measure the space’s dimension to determine cubic feet.
( Length x Width x Height = Cubic Feet)
PROPANE/LP VAPORIZATION RATE
100 lb.
40 lb.
20 lb.
PROPANE HEATER CYLINDER SELECTION CHART
Pounds of
Propane in
Cylinder
100 113,000 167,000 214,000
90 104,000 152,000 200,000 80 94,000 137,000 180,000 70 83,000 122,000 160,000 60 75,000 109,000 140,000 50 64,000 94,000 125,000 40 55,000 79,000 105,000 30 45,000 66,000 85,000 20 36,000 51,000 69,000 10 28,000 38,000 49,000
Maximum Connuous BTU Output Per Hour at Various
0F 20F 40F
Temperatures
2. Subtract the outside temperature from the desired inside temperature to determine the temperature increase.
3a. If you have measured temperature in FAHRENHEIT, calculate the required BTUs with this formula:
(Cubic Feet x Temperature Increase x .133 = Required BTUs)
3b. If you have measured temperature in CELSIUS, calculate the required BTUs with this formula:
(Cubic Feet x Temperature Increase x .2394 = Required BTUs)
HEAT RISE-’BTU’ REQUIREMENT REFERENCE CHART
CUBIC FEET HEATER BY ‘BTU’ REQUIRED: K= ,000
25,000 60K 90K 120K 150K 180K 240K
20,000 48K 72K 96K 120K 144K 192K
15,000 36K 54K 72K 90K 108K 144K
10,000 24K 36K 48K 60K 72K 96K
7,500 18K 27K 36K 45K 54K 72K
5,000 12K 18K 24K 30K 36K 48K
2,500 6K 9K 12K 15K 18K 24K
WORK AREA OR L x W x H
SELECT CUBIC FEET SIZE OF
NOTE: Estimated heating areas information included in this brochure assumes the area to be heated has a 10 ft. ceiling.
DESIRED TEMPERATURE RISE BETWEEN OUTSIDE & INSIDE
CELSIUS 10C 15C 20C 25C 30C 40C
FAHRENHEIT 18F 27F 36F 45F 54F 72F
ABOUT ENERCO
Headquartered in Cleveland, Ohio, Enerco manufactures a complete line of heating products for commercial, industrial, home and shop applications.
Products include propane and kerosene forced air heaters, radiant and convection construction heaters, garage and shop heaters, low and high intensity custom designed overhead heating systems, and custom designed systems for industrial applications.
PHONE: 866-447-2194 FAX: 800-321-0552 www.heatstarbyenerco.com
12
www.heatstarbyenerco.com • Enerco Group Inc. 4560 West 160th St. Cleveland, Ohio 44135 •
L230
1-866-447-2194
Loading...