Heatstar F156001, F155226, F155229, F156041, F156051, F156081, F156091 User Manual
HVAC & LP GAS DISTRIBUTION CATALOG
ENERCO GROUP INC. CLEVELAND OHIO
Cleveland, OH
Enerco Group, Inc., based in Cleveland Ohio, has been at the forefront of infrared and combustion
technology since 1957. Market leading engineering and experience has enabled Enerco to build
expertise in the consumer heating, heavy duty industrial, construction, custom process heating
and now, agricultural and greenhouse heating markets. Over six decades, Enerco has developed
brands and product lines tailored to the needs of these market segments.
Since 1984, Enerco has established several brands generating rapid growth via retail distribution.
The Mr. Heater Brand is America’s most popular heater brand in the consumer market. It includes
an array of products geared to the specialized needs of the outdoor enthusiasts.
Heatstar by Enerco and Enerco are leading brands in the construction, equipment rental and
industrial arenas. These heaters are engineered with rugged designs geared to meet the durability
and toughness demands of construction and industrial work sites. The Heatstar Brand is sold
exclusively through professional tool, industrial, rental, HVAC and LP gas distributors. Enerco
Brand applies to a complete line of hoses, fittings and accessories marketed through industrial,
professional HVAC, LP Gas and Recreational Vehicle distributors.
In 2013, Stanley Black and Decker selected Enerco Group, Inc. to be the North American licensee
to make and market D
EWALT® Portable Heaters. The DEWALT® license arrangement was
expanded to include Europe in 2017. In 2015, the Heatstar AG Brand was launched with a group of
products custom built for agriculture and greenhouse applications.
Through product innovation, world class quality, outstanding marketing, and world class customer
service, Enerco has earned North American market leading positions in each of the markets we serve.
2
TABLE OF CONTENTS
DescriptionPage
Vent Free Heaters4-5
Radiant Tube Heaters6-7
High Intensity Infrared Heaters8-9
NEW Restaurant/Patio Radiant Glass Heaters10
NEW Pellet Stoves11
Page 5
Page 8
Portable Propane Heaters12
Portable Propane Buddy Heaters13
TM
NEW Buddy FLEX
Heater & Cooker14
NEW Industrial Electric Heaters15
TM
NEW NOMAD
Box Heaters16
NEW Gas Unit Heaters17
Direct-Fired Greenhouse Heaters17
TM
HEATSTAR
Construction Heaters18
Pro-Series Construction Heaters19
DEWALT Cordless Job-Site Heaters20
DEWALT Job-Site Heaters21
Hand & Foot Warming Products22
Page 9
Page 20
Portable Propane Stoves, Torches & Showers22
Propane Hoses, Fittings & Regulators23-27
Icon guide
Easy repairs
Tech service: 1-866-447-2194
Heavy-duty
Easy-grip handle
Indoor safe
3
VENT FREE INFRARED HEATERS
Model #Description
F156001HSSVFRD10LPT - (Propane) - 10,000 BTU/Hr.
F155226HSVFR10NG - (Natural Gas) - 10,000 BTU/Hr.
F155229
F156041
F156051HSSVFRD20LPBT - (Propane) - 20,000 BTU/Hr.
F156081
F156091HSSVFRD30LPBT - (Propane) - 30,000 BTU/Hr.
• Blower fan included (20 & 30,000 models only) - Effectively circulates heat
• Wall mount bracket & floor mount feet included - Easy to install
• No venting or chimney required
• 4500 ft high altitude restriction (see manual for use above 4,500 feet)
• CSA certified - Not Approved for use in California or Canada.
This heater obtained the indicated BTU ratings when tested per ANSI Z21.11.2-2002, addenda Z21.11.2a-2003 “Gas Fired Room Heaters”,
Volume II, “Unvented Room Heaters.” Always check local codes for permitted uses.
This heater obtained the indicated BTU ratings when tested per ANSI Z21.11.2-2002, addenda Z21.11.2a-2003 “Gas Fired Room Heaters”,
Volume II, “Unvented Room Heaters.” Always check local codes for permitted uses.
F106408XLERXL40 (10’ Turbulator)10’6”12”55”30”10-14’90
F106404XLERXL60/80 (10’ Turbulator)20’6”18”55”36”12-15’110
F106405XLERXL80 (10’ Turbulator)30’6”18”55”36”12-15’110
F106401XLERXL100 (5’ Turbulator) or ER2STG100 N/LP30’6”18”74” 36”12-15’130
F106406XLERXL100/125 or ER2STG125 N/LP40’6”18”87”36”14-19’150
F106407XLERXL125/150/175 or ER2STG125/175 N/LP50’6”18”87”36”15-25’170
F106403XLERXL150/175 or ER2STG175 N/LP60’6”18”87”36”15-25’190
Top
Horizontal
Top 45°
Angle
Straight
Below
Sides
Typical
Mounting
Height
Tube sets include: Tubes, reectors, hangers, couplers, & vent adapter, plus turbulator where necessary
Shipping
Weight
(lbs.)
ACCESSORY KITS
Stock #Description
F102603*Installation kit for 30’ unit (ER 2STG100)
F102604*Installation kit for 40’ unit (ER 2STG125)
F102606*Installation kit for 50’ unit (ER 2STG125/175)
F102608*Installation kit for 60’ unit (ER 2STG175)
NOTE: ALL 4040 HEATERS COME WITH AN
EXTRA ORIFICE TO CONVERT TO 30,000
BTU’S.
NOTE: ALL 8060 NG HEATERS COME WITH
EXTRA ORIFICES TO CONVERT TO 50,000 or
70,000 BTU’S. (70,000 BTU only available in NG)
“NOTE: ALL 8060 LP GAS HEATERS COME WITH AN
EXTRA ORIFICE TO CONVERT TO 50,000 BTU’S.
NOTE: ALL 9000S HEATERS COME WITH
EXTRA ORIFICES TO CONVERT TO 80
OR 90,000 BTU’S.
NOTE: ALL 9120NG HEATERS COME
WITH EXTRA ORIFICES TO CONVERT
TO 100,000 OR 140,000 BTU’S. (140,000
BTU only available in NG)
NOTE: ALL 9120LP HEATERS COME
WITH AN EXTRA ORIFICE TO CONVERT
TO 100,000 BTU’S.
Optional controls available, contact factory for details.
SuffixDescriptionGas
SP
PP
Automatic Spark Ignition on pilot with safety burner shutoff, 24VAC control with intermittent
pilot. (Pilot is off when heater is off) Transformer 120V/24V shipped loose with heater
Power pile (self-generating) millivolt control. No outside electrical source is required to turn heater on
and off. Manually lit pilot. Safety shutoff on pilot and burner. Thermostat shipped loose with heater.