Heat Seal PS-2 User Manual
Label Dispensers
Models: PS-1, PS-2, PS-7, PS-12, PS-20, PS-40
Model PS-20 with spacers
Model PS-2
FEATURES
Easy to Load Any Roll Onto Individual Core Mounting
Each Label Roll Turns Freely on Independent Core of Polystyrene Plastic
Easily Separates Pressure Sensitive Labels From the Backing Paper
New Rolls Can Be Inserted Without Removing Other Rolls
Specification Sheet
Model PS-40
Heavy Gauge Aluminum Frame
Roll Cores Are Removable
Optional Spacers Available to Accommodate Larger Size
Rolls
Keyhole Slots for Mounting to Wall
Sturdy Non-Skid Rubber Feet (Except the PS-1, PS-2)
MODEL SPECS
MODELS PS-1 PS-2 PS-7 PS-12 PS-20 *PS-40
CAPACITY
(MAX ROLLS)
WIDTH
DEPTH
HEIGHT
WEIGHT
1 Roll 2 Roll 7 Roll 12 Roll 20 Roll 40 Roll
3” 9 1/2” 15 1/2” 25 3/4” 25 3/4”
3 lbs. 4 lbs. 6 lbs. 7 lbs. 15 lbs.
MODEL OPTIONS
1/2 Inch Spacers
Stainless Steel Frame
Suction Cup Feet
Consult Factory for Special Size Requirements
7 1/4”
4” 15”
Revised 2013
Loading...