Heat Seal C-14 User Manual
Jaw Sealers
Models: P-, C-, CH-, CV-
Model P Jaw Sealers With Non-stick Covered
Jaws: Sealing Polyethylene, Polypropylene, Similar
Low Density Films and Bubble Pack Envelopes.
Model C Jaw Sealers With Flat or Serrated Jaws:
Sealing Cellophane, Mylar, or Other High Temperature Films. Seal Bars Available with Horizontal or
Vertical Serrated Jaws.
FEATURES
Constant Heat with Adjustable Temperature Control, Range
100F to 450F
Heavy Duty All Aluminum Construction
Specification Sheet
Standard Table Mounting with the Foot Pedal Bolted to the
Floor
Foot Pedal Operation
Standard On/Off Switch on the Power Cord
Serrated or Flat Jaws Available in Sizes Up to 24”
Non-stick Cover (Included on Model P Only)
Seals All Types of Polyethylene, Polypropylene, Cellophane, Mylar, and other High Temp Bags
MODEL SPECS
JAW SIZE 8” 10” 12” 14” 16” 18” 24”
MODEL P
W/ NON-STICK COVER
MODEL C
WITH FLAT SEAL
MODEL C HORIZONTAL
SERRATED SEAL
MODEL C VERTICAL
SERRATED SEAL
POWER
REQUIREMENT
WATTAGE
WEIGHT
P-8 P-10 P-12 P-14 P-16 P-18 P-24
C-8 C-10 C-12 C-14 C-16 C-18 C-24
CH-8 CH-10 CH-12 CH-14 CH-16 CH-18 CH-24
CV-8 CV-10 CV-12 CV-14 CV-16 CV-18 CV-24
115 Volt, 5 Amps
600 Watts
10 lbs. 10 lbs. 11 lbs. 11 lbs. 12 lbs. 12 lbs. 14 lbs.
AVAILABLE OPTIONS
Model 4 Jaw Sealer Stand- Foot Operated, Aluminum Stand, Compatible with All Jaw Sealer Models and Sizes.
Stand Dimensions: 18” L, 10”W, 36” H, 20 lbs.
Revised 2013
Jaw Guards
Loading...