Heat Seal 635 User Manual
THE STANDARD
MODEL 635
The Model 635 Vacuum Sealer and Gas-Vac Sealer, are
the standard by which vacuum sealers are measured.
This extraordinary workhorse is the only vacuum
sealer to incorporate our exclusive “Smart Pad”
control center and independent vacuum and heat seal
jaw into our famous cleanroom-friendly design.
The 635 Gas-Vac model offers the user
the flexibility of selecting one of five
multiple process operating modes via
the “Smart Pad” control center.
Select from Gas-Vac-Seal (1-99
cycles), Vac-Seal, Seal only, Vac-
Gas-Vac-Seal, and Vac-Gas-Seal
(1-99 cycles).
FLEXIBILITY
Should your packaging process require a
vacuum sealer for packaging moisture and
oxygen sensitive products, ask for the validatable
option.
VALIDATABLE
Precision, Digital
Gas-Vacuum & Vacuum
Sealers
The Model 635 is a perfect solution for
packaging Moisture and Oxygen Sensitive
Products in Critical Environments. It’s
“Smart Pad” offers multiple operating
modes.
The 635’s rugged electronics are fully burn-in tested
and matched to a rigid steel case with the highest
quality pneumatic components. This adds up to one
tough machine that will be performing for years, even in
the harshest production environments.
PERFORMANCE
VACUUM SEALER
QUALITY HEAT SEALING SOLUTIONS
VACUUM SEALER
CLEANROOM FEATURES
• Non-Particle Generating Venturi Vacuum System
• Isolated Exhaust Port
• Clean Design
BUILT-IN FEATURES
• “Smart Pad” Control Center with Multiple Operating Modes:
(5 selectable modes on Gas-Vac Model)
Gas-Vac-Seal (1-99 cycles)
Vac-Seal
Seal Only
Vac- Ga s-Va c-Sea l
Vac-Gas-Seal (1-99 cycles)
• Manual Override of Any Digital Timer
• Electronic Foot Switch Activator
• Jaw-Obstruction Safety Feature
• Retracting Stainless Steel Nozzle(s)
Gas-Vac Model (2 nozzles)
Vacuum Model (1 nozzle)
• Vacuum Gauge
• Thermal Overload Protection
• Rigid Welded Steel Case with Powdercoat Finish
• Product Support Tray
• Exhaust Silencer
BUILT-IN FEATURES
• Seal Lengths: 20”, 25”, 30” and 35”
• Seal Width: 1/4” Standard (other seal widths & styles
available)
• Standard Vacuum Pressure:
Up to 26 in Hg Standard
• Suction Flow: 1.4 CFM (One Nozzle/Vac)
2.8 CFM (Two Nozzles/Gas-Vac)
• Requirements:
Power: 120 Vac, 7 Amps (20” model)
Air: 2.4 CFM @ 90 PSI (1 Nozzle/Vac)
4.8 CFM @ 90 PSI (2 Nozzles/ Gas)
• Size:
Length: Seal Length +5.5
Width: 9.75”
Height: 8.5”
• Approximate Weight: 42 lbs.
FACTORY OPTIONS
• 3/8” Seal Width
• Gas Purge System
• 220 Vac Conversion
• CE Approval
VALIDATABLE OPTION
Includes:
• Digital Temperature Control
• Digital Vacuum Level Control
• Calibration Ports
• Stainless Steel Enclosure
OPTIONAL ACCESSORIES
• Ergonomic Multi-Position Stand
• Ultra Quiet Lab Compressor
• Standard Industrial Air Compressor
• Portable Accu-Sealer Cart
MODEL 635
Authorized Distributor:
WEST COAST PLASTICS EQUIPMENT
800-392-8569
FAX 310-837-4947
www.sealer.net
RETRACTING NOZZLE(S)
REDUCE OPERATOR
TRAINING & CYCLE TIME
MACHINE
ANGLE/HEIGHT
ADJUSTABLE BY
ONE OPERATOR
PRODUCT
SUPPORT TRAY
RIGID MODULAR
ALUMINUM
CONSTRUCTION
SINGLE
RETRACTING
NOZZLE
CONVENIENT
MACHINE PIVOT
The Accu-Seal Model 635 was designed, built, and
tested to give years of reliable, trouble free service.
TWO-YEAR LIMITED WARRANTY
“SMART PAD” CONTROL
CENTER
EXCLUSIVE INDEPENDENT
JAW SYSTEM
Pictured
635 GAS-VACUUM SEALER
VACUUM SEALER
QUALITY HEAT SEALING SOLUTIONS
MEMBER
635 VACUUM SEALER
SHOWN WITH OPTIONAL ERGONOMIC
MULTI-POSITION ACCU-SEAL STAND
Features and Specifications subject to change without notice
Loading...