Heath Zenith notifi Owner's Manual
Owner’s Manual
Introduction
Table of Contents
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
HOW TO USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9
CARE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . 9
FAQS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11
Thank You for Purchasing Notifi ™ Video Doorbell System
Welcome to Notifi by HeathZenith, the fi rst video doorbell system that doesn’t require batteries for the camera and allows you
to position the camera to best suit your needs. This manual will help setup the Notifi system. Please read and understand this
entire manual before attempting to assemble, install, or operate the Notifi system. For additional support and videos, go to
www.heath-zenith.com/notifi .
IMPORTANT INFORMATION
• Minimum system requirement for the Notifi app is iOS 7 or higher and Android 2.2 or higher.
• The Notifi camera requires constant power to operate. Whenever the power is turned on to the camera (either for the fi rst
time or after a power outage), the bulb requires a short 60-second boot-up period before the camera will be fully operational.
NOT COMPATIBLE WITH LIGHT FIXTURES CONTROLLED BY A:
• Photocell (dusk-to-dawn operation)
• Motion Sensor
• Dimmer
• Timer
Many states regulate the use of security cameras and other recording devices. It is the purchaser’s sole
responsibility to ensure compliance with all applicable laws and to provide any legally required notices.
Check local laws regarding the use of any recording devices and cameras prior to installation.
1
Introduction
Specifi cations
Bulb: 560 Lumens at 100% intensity (= 60W incandescent bulb) Color Temp – 3,000 K
Light Fixture Type: Standard E26 Medium Base
Power Requirements:
LED Bulb: 120 Volts 60 Hertz
Chime: 120 Volts 60 Hertz
Push Button: A23 Battery (1 year battery life)
Electrical Load: 16 Watt Max (3W Max in standby mode)
Video Quality:
Resolution: Default = Hi = 1280x720 (720p), Resolution Med = 640x360, Resolution Low = 320x180
Frame Rate: Adjustable up to 25 Fps (Default 15 Fps)
Viewing Angle: 100° (Fully adjustable camera mounting gives the user the ability to determine the camera’s fi eld of view)
Camera Cord Length: 22 inches
Operating Temperature: -13 to +120°F (-25°C to +50C)
Motion Detection Range: Adjustable up to 30 ft. (9.1 m)
Transmitter Range: Push Button to Bulb is up to 50 feet, Push Button to Chime is up to 70 feet
Minimum System Requirements for the Notifi App: iOS 7.0 or higher and Android 2.2 or higher, Broadband Internet
Connection with Home Wi-Fi®: Download speed is 3 MB/s and upload speed is 1 MB/s
Subscriptions
Notifi offers two levels of service. The (free) basic service provides cloud storage of all events for 24 hours. The premium
service costs $9.99 monthly or $99.99 annually and provides cloud storage of all events for 30 days.
Basic Service:
• 24 hour cloud storage of push button triggered events
Premium Service ($9.99 USD per month or $99.99 annually):
• 30 days cloud storage of all events
• Captures both push button triggered and motion triggered events
You Will Need
• Standard, ON/OFF switched, medium base bulb light fi xture
• Password for your home network
• Broadband Internet connection with home Wi-Fi router
• Phillips screwdriver
• Flat-head screwdriver
2
Introduction
Carton Inventory
CAMERA
Camera lens
Lens cap
Microphone
Camera cable (22 in.)
Antenna
CHIME
Camera mounting bracket
LED BULB
Speaker
PUSH BUTTON
(battery included)
Screws (#4 x 3/4"), Wall Anchors, and Double-Sided Tape
(25mm x 22mm) for Camera Installation
Accessories* (not included)
Notifi Accessory LED Light Bulb
Additional accessory light bulb available for purchase. Perfect for entryways with multiple light fi xtures.
Model Number: SL-3008-00
* Accessories available for purchase at www.heath-zenith.com/notifi
Window Cling Decal
Screws (#4 x 3/4") and Double-Sided Tape
(18mm x 62mm) for Push Button Installation
3
Loading...