Heat & Glo LifeStyle SL-750, SL-959, SL-550 User Manual

SL-550, SL-750 and SL-950 Series

CUT HERE

OPTIONAL DOOR INSTALLATION INSTRUCTIONS

KITS: DF-550M, DF-750M and DF-950M

Leave this manual with party responsible for use and operation.

CAUTION! Risk of Cuts or Abrasions. Wear protective gloves and safety glasses during installation.

Installing the optional door on the Fireplaces Step 1. SL-TR/TV Series: Remove the top louver as-

sembly, which was originally shipped with the ﬁ replace, and discard.

SL-TRS Series: Lower louver must be ordered

separately . Proceed to Step 3.

Note: Install shoulder screws to the side of the unit (see

Figure 1).

Step 2. SL-TR/TV Series: Remove the lower louver

assembly by lifting the louver out of the slots of the ﬁ replace.

Step 3. Cut the top 2 ½” louver off of the lower louver

assembly as shown in Figure 2. Note: Assure all the sharp burrs are removed after cutting.

Step 4. Reinstall the lower louver assembly. Step 5. Install the door option.

Step 6. Install the top louver assembly which came

with the optional door.

INSTALL

SHOULDER

SCREWS

Figure 1

Figure 2

Cleaning Instructions for Doors

Use a microﬁ ber cloth and Windex® Original Glass Cleaner or 03M003 Stove Bright® Glass Cleaner to clean the door immediately after installation to remove acids deposited by the installer or technician. Spray the cleaner onto the microﬁ ber cloth and carefully wipe the entire surface. The door should be cleaned in this manner annually by the homeowner to remove ﬁ ngerprints or other contaminants. Once oxidation of the paint pigment has occurred, cleaning will not restore the original color.

Heat & Glo • SL-550, SL-750, SL-959 Door Installation Instrucitons • 539-925 Rev. E • 5/11

Please contact your Heat & Glo dealer with any questions

or concerns.

For the location of your nearest Heat & Glo dealer,

please visit www.heatnglo.com.

Heat & Glo, a brand of Hearth & Home Technologies Inc.

7571 215th Street West, Lakeville, MN 55044

www.heatnglo.com