Heat & Glo SL-550, SL-750 ,SL-950 OPTIONAL DOOR INSTALLATION INSTRUCTIONS

SL-550, SL-750 and SL-950 Series
OPTIONAL DOOR INSTALLATION INSTRUCTIONS
Installing the optional door on the Fireplaces
Step 1. SL-TR/TV Series: Remove the top
louver assembly, which was originally shipped with the fireplace, and dis­card.
SL-TRS Series: Lower louver must be
ordered separately. Proceed to Step 3.
Note: Install shoulder screws to the side
of the unit (see Figure 1).
Step 2. SL-TR/TV Series: Remove the lower
louver assembly by lifting the louver out of the slots of the fireplace.
INSTALL
SHOULDER
SCREWS
Figure 1
Step 3. Cut the top 2 ½” louver off of the lower
louver assembly as shown in Figure 2. Note: Assure all the sharp burrs are removed after cutting.
Step 4. Reinstall the lower louver assembly.
Step 5. Install the door option.
Step 6. Install the top louver assembly which
came with the optional door.
Figure 2
Printed in U.S.A. Copyright 2005, Heat & Glo, a brand of Hearth & Home Technologies Inc. 20802 Kensington Boulevard, Lakeville, MN 55044
HEAT & GLO QUALITY SYSTEMS REGISTERED BY SGS ICS
539-925C 2/05
Loading...