Heat & Glo Cerona-36, Cerona-42 Installation & Operating Instructions

Galleria Doors

Cerona-36 and Cerona-42

Installation & Operating Instructions

Leave this manual with party responsible for use
and operation.

WARNING

HOT! DO NOT TOUCH.
SEVERE BURNS MAY RESULT.
CLOTHING IGNITION MAY RESULT.

Glass and other surfaces are hot during operation and cool
down.

• Keep children away.

• CAREFULLY SUPERVISE children in same room as
appliance.

• Alert children and adults to hazards of high temperatures.

1. To lock the doors shut, insert the black 10-24 Phillips
head bolt through the small notches by the handles.
Tighten the bolt into the threaded insert mounted
between the spring clips on the lower hinge bracket
See Figure 1.

• Do NOT operate with protective barriers open or removed.

• The doors must remain closed if children will be present
during the operation of the fi replace.

• The doors may be made operable per these instructions.
This may be done only upon request of a person responsible
for the use and operation of the fi replace.

• The doors can be returned to the locked position following
these instructions.

• Keep clothing, furniture, draperies and other combustibles
away.

• When the doors are in an operable state, the door-locking
screw must be retained in the threaded nut behind doors.

WARNING! Risk of Fire! Under no circumstances can com-

bustible material overlap or be placed under a surround.

CAUTION! Do not install damaged components.

SEE DETAIL

HANDLES

LOCKING BOLT

Figure 1.

2. To unlock the doors, remove the bolt and open the
doors. Reinstall the bolt into threaded insert from the
back side so the bolt doesn’t interfere with the door.

Heat & Glo • Galleria Doors • 2106-937 Rev. B • 7/09

3. See Figure 2 for assembly details on Cerona-36 and Figure 3 for assembly details on Cerona-42.

Figure 2. Cerona-36

Heat & Glo • Galleria Doors • 2106-937 Rev. B • 7/09