Replaces BN-ETPTB, May 2007
EXTENDED THIN PROFILE UNIT COOLER
Technical Guide
Models LTA | Air Defrost • LTL | Electric Defrost
BNETPTB
May 2008
www.thecoldstandard.com
Table of Contents
Nomenclature ..........................................................................................................................................................................................................2
Features & Benets ................................................................................................................................................................................................2
Performance Data & Specications
Air Defrost .........................................................................................................................................................................................................3
Electric Defrost ................................................................................................................................................................................................3
Physical Data ............................................................................................................................................................................................................3
Dimensional Data ...................................................................................................................................................................................................3
Nomenclature
LT A 053 B A
Model Series Model Type Capacity Electrical Code Design Revision
Bohn Extended Thin
Prole Unit Cooler
A = Air defrost
L = Electric defrost
# BTUH x 100 A = 115/1/60
B = 208-230/1/60
Features & Benefits
Cabinet
Low height makes it the most compact unit for reach-in display cases where space is limited, giving the case a clean look
•
and allowing for more shelving and product storage
Textured aluminum cabinet
•
Easy access to motors and the refrigerant and electrical components with front access panel
•
Modular front access panels provide easy access to motors and can be removed independently of the drain pan
•
Plastic vibration isolators for fan panels and drain pan reduce noise and vibration
•
Liquid-line solenoid wire harness comes standard for quick installation
•
Coil
Internally enhanced tube design produces better unit performance
•
Blow-through coil means air is discharged through the coil
•
Heaters are attached to the coil for easier serviceability
•
Models available for R-404A and R-22 refrigerant
•
Controls
Defrost termination control
•
Fan delay control
•
Heater safety control
•
Options
Reverse air flow
•
Beacon II™ compatible
•
Smooth white painted cabinet
•
Pre-assembled units with factory mounted TXV, liquid-line solenoid and room thermostat
•
Coated coil for corrosion protection
•
©2008 Heatcraft Refrigeration Products LLC
2