Construction �����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������3
System Features �����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������3
Standard Compressor Module Components �����������������������������������������������������������������������������������������������������������������������������������������������������������������4
Scroll® Hermetic, R-404A, Medium Temperature�������������������������������������������������������������������������������������������������������������������������������������������������������5
Scroll® Hermetic, R-407A, Medium Temperature�������������������������������������������������������������������������������������������������������������������������������������������������������6
Scroll® Hermetic, R-407C, Medium Temperature ������������������������������������������������������������������������������������������������������������������������������������������������������7
Scroll® Hermetic, R-404A, Low Temperature ������������������������������������������������������������������������������������������������������������������������������������������������������������8
Scroll® Hermetic, R-407A, Low Temperature ������������������������������������������������������������������������������������������������������������������������������������������������������������9
Scroll® Hermetic, R-407C, Low Temperature ����������������������������������������������������������������������������������������������������������������������������������������������������������10
Hermetic, R-407C, Extended Temperature �������������������������������������������������������������������������������������������������������������������������������������������������������������14
Hermetic, R-404A, Low Temperature ����������������������������������������������������������������������������������������������������������������������������������������������������������������������15
Dimensional Data �������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������18
FlexPack™ was designed for energy savings, reduced installation
time and expense, and a better return on your investment.
Cabinet & Construction
The industrial grade cabinet is constructed of heavy gauge painted steel. The top and sides of the unit can be easily removed
for convenient access to electrical and mechanical components. The unit also has a rooftop AC- style appearance to simply
blend into the existing environment along with flush mounted fans for a sleek look. In addition, the unit has a clean and
intuitive electrical and piping layout.
The unit was designed for 100°F ambient operation. It can be configured for higher ambient applications. The units are also
Beacon II™ capable and were designed with state-of-the-art energy efficient motors.
■ Single unit to place on roof reduces installation cost
■ Small footprint requires less room on the roof or in the back of the store
■ Single-point wiring and piping lowers installation cost and provides a single penetration point through the roof
■ Significantly reduces air conditioning energy costs by reducing the heat load in the space through the use of remote condenser circuits
■ Quieter sound with fewer condenser fans and the reduced noise level of vertical fans
System Features
■ Up to 3 compressors, 1/2 - 6 HP Hermetic or Scroll®
■ RST, CF, CS, ZF, ZS standard compressors
■ 230 volt/1-phase/60 hertz and 230 volt/3-phase/60 hertz units available
■ 1, 2 or 3 condenser fan configurations
■ R-404A for medium or low temperature applications
■ Remote condenser circuits for ice machine, drink dispenser, display cases and more
■ Capacity range
l 1 Fan = 6 HP (up to 2.5 to 3 HP per side)
l 2 Fan = 12 HP (up to 5 to 6 HP per side)
l 3 Fan = 18 HP (up to 6 to 7.5 HP per side)
■ Electrical component layout lines up with compressor module
■ Beacon II™ or conventional mechanical controls available
■ Energy efficient, flush mounted 18" fans with 1100 RPM motors
■ Painted steel cabinet
■ Aluminum fin coils are standard; copper fin coils and polyester coated coils are optional
■ Convenient hinged access panels for easy access
■ UL listed for US and Canada
3
3
3
COMPRESSOR MODULE COMPONENTS
Compressor Module Components
StandardOptional
■ Fixed high pressure switch
■ Fixed low pressure switch on medium and high
temperature compressor modules
■ Adjustable low pressure switch on low temperatures
modules
■ Suction service ports on all modules
■ Suction accumulator (CS & CF extended temperature
compressors)
■ Vertical receiver in 6" x 12" or 6" x 27" sizes
■ Sealed type liquid line drier
■ Sealed type suction filter
■ Head pressure control valve
■ Crank case heater
■ Sight glass
■ Remote condenser circuit
■ Remote condenser circuit, pre-charged R-404A
■ Polyester coated fins
■ Copper finned coil
■ Individual compressor fusing, 230V
■ Individual compressor circuit breakers, 230V
■ Adjustable low pressure switch on medium and high