Heartland Appliances LEGEND METRO CLOCK User Manual

1050 Fountain St. N., Cambridge, Ontario, Canada N3H 4R7

ATTENTION INSTALLER:

Bus. [phone] or Fax [phone]

Toll Free Phone [phone]

Toll Free Fax [phone]

Leave this manual with appliance

Model 3530-3630

Model 3535-3635

Installation and Operation Guide

30” and 36” Gas/Electric Professional Style

Cook Stove

NOTE: Clock must

be set or your

oven will not

function!

Note: Please read these instructions thoroughly before attempting to install this unit. Failure
to follow installation instructions will result in costly service calls.

This appliance can only be installed in the state of Massachusetts by a Massachusetts
licensed plumber or gasfitter.

These symbols on the nameplate mean the product has been design
certified by C.S.A International Laboratories

CERTIFIED

C

®

US

Save these instructions for future use

#3937 032205

© 2005 HEARTLAND APPLIANCES INC.

Metro / Legacy Series

Electronic Oven Control
Features

(fig 10)

Convection Broil

Indicator

Convection Bake

Indicator

minute minder
clock

cook time

Broil Indicator

stop time
decrease
start

Start Time Indicator

Stop Time IndicatorBake Indicator

self clean

oven light
increase
cancel

Indicator

Convection Fan

Indicator

Self Clean

Indicator

Element “ON”

Indicator

Celsius

broil
bake

convection

Features:

• Time of day display , selectable 12 hr/24 hr clock mode.

• Count down timer display .

• Fully programmable bake and broil cooking, include cook time, stop time, convection bake
and broil, self clean function, etc.

• T emperature setting changeable without canceling any programs.

• Selectable temperature setting in Celsius or Fahrenheit.

• Actual oven temperature is displayed during baking or convection baking mode and will be
displayed in 5°F increments until desired tempature is reached.

• Large LED display , 4 digit display time, 3 digit display temperature.

• During running of an oven function, press of function key can recall the setup of the function.
After 5 seconds, the display will change back to real temperature and clock display .

• Beep when button is pressed or finish oven programmed function.

• Child safety keyboard lockout.

16

Oven and Clock Operation

Table Of Contents

1. General Information 7. True Convection

2. Safety Features 8. Convection Bake

3. Oven Light 9. Broil

4. Clock Operation 10. Convection Broil

5. Minute Minder 11. Sabbath Mode

6. Bake 12. Self Clean

1. General Information

• Clock must be set before any other
operation of the electronic oven control.
No other setting is possible until the
clock is set.

• When supplying power to the appliance for
the first time or after a power interruption the
following will occur:

Section 4: Oven and Clock Operation

seconds elapse between consecutive selec­tions during programming, the function will be
cancelled automatically).

• Time of day is always displayed in

hours:minutes.

• The maximum programmable length of time

for bake, convection bake, and

i. The digital clock will display 88:88
i i. The symbols for increase and

decrease will flash until the clock is set.

• Oven functions ( bake, broil,

convection, etc.) are identified by a

symbol on the key pad (fig 11).

• An audible signal will sound each time a
function symbol is fully depressed and the
symbol will commence flashing.

• After an oven function has started, the
corresponding symbol will glow continually
until the function is complete or it has been
cancelled.

• Programming of functions can be cancelled at
any time to begin again (if more than 20

minute minder functions is 11 hours and

59 minutes.

• If set to 295° F or below , display will show
SP for 5 seconds.

• After starting any cooking function, the clock
will display “11:59” in standard mode.

• When using increase or decrease keys for
setting times, fast scrolling will begin after

button is depreased for 5 continuous seconds

17

Metro / Legacy Series

2. Safety Features

• The electronic oven control can be temporarily locked (out of service) to prevent children from
switching the oven on. This feature can also be useful when cleaning the control panel glass.
(see Section 4B - “Clock Safety Lock Out” section for details)

• For safety reasons, the oven will automatically shut off if it has been operating continuously for

11.59 minutes or 80 hours in Sabbath mode. (see section 1 1 for details)

• T o begin any cooking function, at least two steps are required to avoid accidentially starting unit
with a single touch.

• During the self clean cycle a cooling fan will be engaged while the oven door is locked to ensure
lower temperatures on the face of the stove.

• During prolonged cooking cycles, a cooling fan may start up to ensure lower temperatures on
the face of the stove.

3. Oven Light

Turn oven light on/off:

1. Press light symbol once to turn oven light on.

Light will turn off after approximately 20 seconds.

4. Clock Operation

(fig 11)

18

Section 4: Oven and Clock Operation

4A. Clock Set Up

(please read all steps prior to setting the clock)

Time of Day:

1. Press clock symbol. (colon between hours and minutes stops flashing and clock

indicator light begins to flash)

2. Within 5 seconds of step 1, press increase or decrease symbols to set the time of
day in hours and minutes. (fast scrolling begins after holding increase or decrease
symbol keys for over 5 seconds)

3. Press start symbol to finish clock set up or wait without pressing any key for 5
seconds for same result.

4. Once clock is set, the colon between the hours and minutes will flash and the clock symbol
will stop flashing.

Notes:

1. Time of day can only be changed when oven is not in operation.

2. To display International hour system (0-24 hrs) instead of 0-12 hrs press clock twice.
To return to 0-12 hrs system, press clock one more time.

3. For 60 Hz AC power supply (North American standard), the 0-12 hrs system will be
displayed automatically after power is turned on.

4. Temperatures can be displayed in Fahrenheit (F) or Celsius (C). To switch from one scale
to another press any function symbol ( bake, broil, convection) twice. For
Fahrenheit there is no F indicator. For Celsius, the C indicator keeps glowing.

4B. Clock Safety Lock Out

(please read all steps prior to setting the lock out)

1. T o lock the control panel press cancel and hold symbol for 3 seconds. Seven horizontal

bars will appear on display and the electronic clock is locked. After five seconds the time of day
will be displayed.

2. To unlock the control panel press cancel and hold symbol for 3 seconds. The horizontal

bars will disappear and clock will return to time of day .

19

Metro / Legacy Series

5. Minute Minder

5A. Set Minute Minder

(please read all steps prior to setting the minute minder)

1. Press minute minder symbol. (clock will display 00:00).

2. Press increase symbol until desired length of time is displayed. (fast scrolling begins after
holding increase symbol key for over 5 seconds)

3. To correct time press increase or decrease as needed.

4. Press start symbol to begin countdown. Countdown begins immediately after pressing

start.

5. When countdown is complete, a continuous audible signal will sound until the cancel
symbol is pressed.

6. Press cancel symbol to end minute minder function at any time.

Notes:

1. The minute minder is used strictly for the countdown of a programmed length of time. It
can be set even while the oven is in operation as it does not control any of the other functions.

2. When minute minder is set for less than 5 minutes, the timer will be displayed in
minutes:seconds. For settings over 5 minutes, the timer will be displayed in hours:minutes.

3. Longest length of time programmable is 19 hours and 58 minutes

20

Section 4: Oven and Clock Operation

6. Bake

6A. Regular Bake

(please read all steps prior to setting the regular bake function)

1. Press bake symbol. (temperature is automatically set at 350F or 175C and the
bake indicator light begins to flash)

2. Press increase or decrease symbols to change temperature setting. T emperature may

be set between 100F to 550F or 65C to 290C. (fast scrolling begins after holding
increase or decrease symbol keys for over 5 seconds).

3. Press start symbol to begin regular bake function. bake indicator light will glow.

After 5 seconds the time of day and temperature in oven will be displayed. T emperatures will
be displayed in increments of 5F or 5C until programmed temperature is reached.

4. Once set temperature is reached, an audible signal will sound.

5. Press cancel symbol to end regular bake function at any time. bake indicator light

and temperature display will go off. Only time of day will be displayed.

Note:

1. T o verify oven temperature set during programming while the oven is heating up, press .
bake symbol. Information will be displayed for 5 seconds.

2. The red indicator, located at the top right corner beside the oven temperature, will be on when

the element is powered and will go off when the element cycles off.

6B. Timed Bake

(please read all steps prior to setting the timed bake function)

1. Press bake symbol. (temperature is automatically set at 350F or 175C and the
bake indicator light begins to flash)

2. Press increase or decrease symbols to change temperature setting. T emperature may be
set between 100F to 550F or 65C to 290C. (fast scrolling begins after holding increase or

decrease symbol keys for over 5 seconds).

3. Press cook time symbol. (timer will display 00:00 and cook time indicator will begin
to flash)

4. Press increase symbol until desired cook time is set. (fast scrolling begins after holding
increase symbol key for over 5 seconds).

5. T o correct time set press increase or decrease as needed.

21