Page 1
If you have any questions , please contact The Fitness Generation, +61 (03) 9765 9999.
Free call number 1300 796 636
www. healthstreamfitness.com.au
Page 2
SAFETY HINTS
WARNING - Read all instructions before using this appliance.
Ϯ Do not operate machine on deeply padded, plush or shag carpet. Damage to both
carpet and machine may result.
Ϯ Keep children away from the machine. There are obvious pinch points and other
machine
machine
caution areas that can cause harm.
machine
Ϯ Keep hands away from all moving parts.
Ϯ Never operate the machine if it has a damaged cord or plug. If the machine is not working
properly, call your dealer.
machine
machine
Ϯ Keep the cord away from heated surfaces.
Ϯ Never drop or insert any object into any openings.
Ϯ Do not use outdoors.
Ϯ The pulse sensors are not medical devices. Various factors, including the user’s
movement, may affect the accuracy of heart rate readings. The pulse sensors are
intended only as exercise aids in determining heart rate trends in general.
Ϯ Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable
machine
for use on your machine. Quality athletic shoes are recommended to avoid leg fatigue.
Ϯ
Instructions for assembly, including correct fitting of guards and other safety devices, and warning
about the likely injuries to young children if exercies cycles are operated in their vicinity without
properly fitted guards.
Ϯ
Instructions for maintenance, including regular checking of the integrity of guards and safety devices.
Ϯ
Instructions for the correct adjustment of the seat.
machine
SAVE THESE INSTRUCTIONS - THINK SAFETY!
CAUTION!! Please be careful when opening this unit.
HS1.0E
A
1
If you have any questions , please contact The Fitness Generation, +61 (03) 9765 9999.
Free call number 1300 796 636
www. healthstreamfitness.com.au
Page 3
HANDLE BAR
WATER BOTTLE
REAR STABILIZER
COMPUTER
CENTRAL TUBE
PEDAL
KNOB
FRONT STABILIZER
2
If you have any questions , please contact The Fitness Generation, +61 (03) 9765 9999.
Free call number 1300 796 636
www. healthstreamfitness.com.au
Page 4
ASSEMBLY PACK CHECK LIST
FIGURE 1
N1 SCREW
N2 NUT N3 WASHER N4 SPRING
FIGURE 3
N1 SCREW N2 NUT N3 WASHER N4 SPRING
FIGURE 4
N5 WASHER N7 SHAFTN4 SPRINGN3 WASHER
FIGURE 5
N6 SCREW N8 SCREW N10 KNOB N12 WASHER
FIGURE 7
N11 SCREW
3
If you have any questions , please contact The Fitness Generation, +61 (03) 9765 9999.
Free call number 1300 796 636
www. healthstreamfitness.com.au
Page 5
N4
N3
N2
A
C
N1
C1
FIGURE_1 ASSEMBLY FOR REAR STABILIZER
Step1.Secure the rear stabilizer(C) to the main frame(A), using two screw(N1), two spring
washer(N4),washer(N3) and two nut(N2).
HOW TO KEEP THE MACHINE STABLE
** After you finish assembly (Figure 1 & Figure 3), if the machine can't be stand stable,
you can use adjusted-end(C1) to adjust the machine.
A1
A3
A
A4
D
A2
A4-1
FIGURE_2 ASSEMBLY FOR CENTRAL SUPPORT TUBE
First, remove the bolts(A3), spring washer(A4-1) and washer(A4) from the main frame(A).
Step1. Connect the cable(A1) & ( A2).
Step2. Assemble the central support tube(D) onto the main frame(A) with bolts(A3),
spring washer(A4-1) and washer(A4).
Note:the screw(A3) is for fixing the central supporing tube(D) and the main frame(A) .
Please do not tighten it for the assembly of FIGURE 4 easily
Attention :when pushing the tubes toghter make sure not to pinch the cables.
4
If you have any questions , please contact The Fitness Generation, +61 (03) 9765 9999.
Free call number 1300 796 636
www. healthstreamfitness.com.au
Page 6
N4
B
N2
N3
N1
A
FIGURE_3 ASSEMBLY FOR FRONT STABILIZER
Step1.Secure the front stabilizer(B) to the main frame(A) using two screw(N1),two spring
washer(N4), washer(N3) and two nut(N2).
A5
N3
N5
N4
N7
A7
A5
N7
A7
FIGURE_4 ASSEMBLY CONNECTING TUBE AND PEDAL TUBE
Step1.Fix the connecting tube(A5) and pedal tube(A7) with
screw(N5) ,spring washer(N4), washer(N3) and screw(N7).
Step2.The right assembly is same as the left side.
Note: Fix the screw(N7) with the pedal tube(please refer to the small drawing for reference)
After fixing it, refer to the assembly of FIGURE 2 and tighten the screw(A3) of the
central supporting tube.
5
If you have any questions , please contact The Fitness Generation, +61 (03) 9765 9999.
Free call number 1300 796 636
www. healthstreamfitness.com.au
Page 7
H1
A7
N8
N6
N12
N10
FIGURE_5 ASSEMBLY FOR PEDAL
Step1.Assemble the pedal(H1) by screw(N8),washer(N12),spring
washer(N6) and star knob nut(N10).
there are 3 sections adjusting for the moving track.
Step2. The right assembly is same as the left side.
F
F
A1
D
F2
F1
A1
D
N9
L
1
3
4
2
FIGURE_6 ASSEMBLY FOR COMPUTER AND HANDLE BAR
Step1. Connect wire(A1) from central supporting tube with wire(F1&F2) from handle bar.
See picture for reference.
Step 2. Assemble handle bar(F) with central supporting tube(D),fix both sides using handle bar
bracket(L) and screw(N9).
Step 3. After finishing the Step1 and 2 please tighten the 4pcs of screws as the arrow directs.
6
If you have any questions , please contact The Fitness Generation, +61 (03) 9765 9999.
Free call number 1300 796 636
www. healthstreamfitness.com.au
Page 8
M
J
N11
N11
D
FIGURE_7 ASSEMBLY FOR WATER BOTTLE HOUSING AND
WATER BOTTLE
Step 1. Assemble the water bottle housing(J) with central supporting tube(D) and use screw(N11)
to fix.
Put the water bottle(M) on the water bottle housing(J).
E2
A11
A10
A9
A6
FIGURE_8 ASSEMBLY FOR HANDLE BAR
Step 1 Unfix the screw(A11),spring washer(A10) and washer(A9) of handle bar(A6).
Step 2. Assemble the handle bar(R)(E2) with A6 and fix them with A11,A10,A9.
Step 3. The left assembly is same as the right side.
7
If you have any questions , please contact The Fitness Generation, +61 (03) 9765 9999.
Free call number 1300 796 636
www. healthstreamfitness.com.au
Page 9
E4
F12
N15
A20
A21
N19
C
E1
A19
A61
A63
A2-1
N3
A22
A33
A64
A59
A18
A62
N16
A47
A16
A58-1
A32
A58
A15
F7
F6
N12
N6
N10
N2
N4
A14
N8
A49
A51
A52
F8
F3
A29
A50
F2
A
A7
A46
C2
J2
D1
A1
D
M
J3
N11
L
D2
A3
A4
H2
A28
N9
N13
N6
A4-1
B5
E2
A12
A8
A29
N1
B2
N2
N4
A10
N3
B1
E3
A11
A9
N14
A6
A13
B3
B4
B
F
F9
J1
N8
A25
H1
F1
A45
A55
A17
G
A56
F4
F13
N5
A54
A57
A44
A69
A48
A53
F5
A66
A41
F10
N4
A68
A43
A12
A28
A65
N3
A67
A38
A42
A40
A26
A70
A2
A37
A60
A24
A39
A36
N18
A5
N7
A30
A71
A30
A31
A27
N12
N10
A23
A31
A27
A34
A35
C1
N1
8
A63
If you have any questions , please contact The Fitness Generation, +61 (03) 9765 9999.
Free call number 1300 796 636
www. healthstreamfitness.com.au
Page 10
P/N
A
A1
DESCRIPTION Q’TY
P/N
1MAIN FRAME
A37
1SENSOR WIRE
A38
1SENSOR WIRE2A
A39
DESCRIPTION Q’TY
WASHER
SPRING
WASHER
1
1
1
A2-1
A4
A4-1
A5
A6
A7
A8
A10
A11
A12
A13
A14
A15
A16
A17
A18
A19
A20
A21
MOTOR
SPRING WASHER
SWING TUBE(R)
PEDAL TUBE(R)
SCREW 4
A40
1
A41
6SCREW3A
A42
6WASHER
A43
6
A44
1SWING TUBE(L)
A45
1
A46
1PEDAL TUBE(L)
A47 2
1
A48
4WASHER9A
A49
4SPRING WASHER
A50 1
4BUSHING A51
A52
4BUSHING
A53
2WASHER
A54
2END CAP
2SCREW
2END CAP
A57
4END CAP
2SCREW
A58
4BUSHING
A58-1
A59
4TAPER WASHER
NUT
NUT
SCREW
WHEEL AXLE
DRIVING BELT
DRIVING WHEEL
MAGNETIC
BEARING
FLYWHEEL
NUT
TENSION CABLE
SPRING
MAGNETIC HOUSING
AXLE
C CLIP
SPRING WASHER
SCREW
SENSOR WIRE
SCREW
DC WIRE
1
1
3
1
1
1
1
1
2
1
1
1
2
2WASHERA55
2A56
2
1
2
1
A22
A23
A24
A25
A26
A27
A28
A29
A30
A31
A32
A33
A34
A35
A36
NUT
BUSHING
CROSS FRAME(R)(L)
CROSS FRAME COVER(R)(L)
WASHER
WASHER
WASHER
A60
2
A61
2SCREW
A62
2END CAP
A63
2WASHER
A64
4
2
A65
2
A66
2SIDE COVER(R)(L)
A67
6SCREW
A68
6
A69
1
A70
1
A71
1SCREW
B
1PRESSING
B2
1BEARING
B3
CHAIN COVER(R)
CHAIN COVER(L)
SCREW
SCREW
C CLIP
NUT
WASHER
AXLE
BEARING
BUSH
BEARING
NUT
FRONT STABILIZER
END CAP
MOVING WHEEL
1
1
9
6
2
1
1
1
1
1
1
4
1
2
2
9
If you have any questions , please contact The Fitness Generation, +61 (03) 9765 9999.
Free call number 1300 796 636
www. healthstreamfitness.com.au
Page 11
P/N
DESCRIPTION Q’TY
P/N
DESCRIPTION Q’TY
B4
B5 2
C1
C1 2
C2
D
D1
D2
E1
E2
E3
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F12
NUT
SCREW
REAR STABILIZER
KNOB
END CAP
CENTRAL SUPPORT TUBE 1
BUSHING
BUSHING COVER
SIDE HANDLEBAR(L)
SIDE HANDLEBAR(R)
FOAM GRIP
END CAPE4
FRONT HANDLE BARF
SENSOR WIRE(R)
SENSOR WIRE(L)
FRONT HANDLE BAR(L)
FRONT HANDLE BAR(R)
SCREW
FOAM GRIP
CNOSOLE
FOAM GRIP
LOWER HOUSING OF CONSOLE
SCREW
BATTERY COVER
2
F13
G
H1
H2
J1
2
J2
J3
2
L
2
M
1
N1
1
N2
2
N3
2
N4
1
N5
1
N6
1
N7
1
N8
1
N9
4
N10
2
N11
1
1
N12
1
N13
6
N14
1
N15
N16
N17
END CAP
PEDAL(R)
SMALL HANDLEBAR BRACKET
WATER BOTTLE
WASHER
SPRING WASHER
SCREW
SCREW
SCREW
KNOB
WASHER
WASHER
WASHER
WASHER
NUT
2
1AXLE SUPPORT
1PEDAL(L)
1
1WATER BOTTLE HOUSING(L)
1WATER BOTTLE HOUSING(R)
3SCREW
2
1
4SCREW
4NUT
6
6
2
4SPRING WASHER
2SCREW
4
4
4
2SCREW
4WASHER
2
2
2
2
2
N18
N19
ALUMINUM IDLE WHEEL 1
SCREW
10
If you have any questions , please contact The Fitness Generation, +61 (03) 9765 9999.
Free call number 1300 796 636
www. healthstreamfitness.com.au
2
Page 12
FIGURE_9 HOW TO MOVE THE MACHINE
The frone stabilizer has built-in transport wheels.
To move the machine, stand at the front and lift it up until the weight of
the machine is transferred to the transport wheels.
You can now easily move the machine to a new location.
11
If you have any questions , please contact The Fitness Generation, +61 (03) 9765 9999.
Free call number 1300 796 636
www. healthstreamfitness.com.au
Page 13
BUTTON FUNCTION:
MODE/ENTER
RESET
START/STOP
RECOVERY
UP
DOWN
TOTAL RESET
In stop mode, the mode is to confirm all exercise data setting, and enter into program.
In stop mode, press the button back to main menu.
To start or stop exercise.
To test hear rate recovery status.
To select training mode and adjust function value up.
To select training mode and adjust function value down.
Clean all preset value to zero.
DISPLAY EXERCISE DATA:
TIME Display range 0:00~99:99 ; Setting range 0:00~99:00
DISTANCE Display range 0.00~99.99 ; Setting range 0.00~99.90km
CALORIES Display range 0~9999 ; Setting range 0.00~9990
PULSE Display range P-30~240 ; Setting range 0-30~240
WATT Display range 0~999 ; Setting range 10~350
SPEED 0~99.9km
RPM 0~999
OPERATION PROCEDURE
1. Connect power supply and computer will power on with a long beep sound, LCD display all segments for 2
seconds and enter into personal data setting mode (gender, age, height and weight) for U1~U4. (drawing A~F)
2. After user data set up, computer will display main menu (drawing G).
AB C D
12
If you have any questions , please contact The Fitness Generation, +61 (03) 9765 9999.
Free call number 1300 796 636
www. healthstreamfitness.com.au
Page 14
EF G
3. In main menu, first exercise program MANUAL will flash, user may press UP and DOWN button to select
MANUAL PROGRAM (12 profiles) USER PROGRAM HRC WATT. (Drawing H~K)
HIJK
4. Quick Start and Manual :
Before exercise in Manual mode, user my set up TIME, DISTANCE, CALORIES and PULSE target.
After power on, user may press START/STOP button to start exercise in MANUAL immediately without
any setting.
Level can be adjusted during exercise by press UP or DOWN.
5. PROGRAMΚ
Before exercise in Program mode, user may set up TIME target.
Press UP and DOWN to select Program with 12 profiles and press ENTER/MODE to confirm.
Level can be adjusted during exercise by press UP or DOWN.
6. H.R.C.Κ
Before exercise, computer will ask for user AGE first to calculate TARGET pulse. User may still press
UP and DOWN to change target pulse from 30 to 240.
7. USER PROGRAMΚ
User may press UP, DOWN and then press MODE to create his own profile. (from column 1 to column 20)
User may hold on pressing MODE button for 2 seconds to quit profile setting.
8. WATT :
The preset watt value 120 is flashing on screen in WATT setting mode. User may use UP, DOWN button
to set target value from 10 to 350. Press MODE button for confirm.
NOTE:
1. This computer require 9V, 0.5mA adaptor.
2. When user stop pedaling for 4 minutes, computer will enter into power save mode, all setting and exercise
data will stored until user start exercise again.
3. When computer act abnormal, please plug out the adaptor and plug in again.
13
If you have any questions , please contact The Fitness Generation, +61 (03) 9765 9999.
Free call number 1300 796 636
www. healthstreamfitness.com.au
Loading...