HealthSmart 40-680-000 Instruction Manual

1

Instruction Manual

Travel Mate™

Personal USB Humidier

Item #: 40-680-000

Instructions for Use: Please read these

instructions carefully and keep them for future reference.

Includes: 1 Travel Mate™ Personal USB Humidier

HealthSmart

®

2

KEY TO SYMBOLS

3

4

1. Mist Output Opening

2. Cap

3. Reusable Wick

4. Wick Housing

5. Base

6. Water Reservoir

7. Power Button

8. USB Input

9. USB Cord

10. Magnets to secure lid

1

2

6

5

7

8

9

10

10

3

Important Safety Instructions:

- After removing all packaging materials, ensure that the humidier
has not been damaged during transportation.

- Do not leave any packaging materials within the reach of children
to avoid injury.

- Only place the humidier on at and stable surfaces.

- Do not move, tilt or tip the humidier during use. Doing so may
cause water leakage.

- Only use clean, cool tap, ltered or distilled water to ll the water
reservoir. Do not use hot water. Do not add salt, fragrance/
essential oils, medication or descaling tablets to the water.

- Do not operate on wood or other water sensitive surfaces, as
condensation may occur.

- Always disconnect the equipment from the USB outlet when it is
left unattended or not in use.

- Before performing any cleaning or maintenance, disconnect the
equipment from the USB outlet.

- This product is not a toy. Keep out of reach of children.

- This equipment is a household humidier for indoor use only. Do
not operate outdoors.

- Do not use accessories, spare parts, or any component not
supplied or approved by the manufacturer.

4

- Never touch the equipment with wet or damp hands.

- If the equipment is damaged and/or not working properly, turn
the unit o by disconnecting the USB cord from the USB outlet.

- Never submerge the equipment in water or any other liquid.

- Do not touch the equipment if it accidentally falls into the water.

- Do not operate the humidier without water.

- Do not attempt to empty or ll the unit while it is plugged in.

- Clean and dry the humidier at the end of every operating cycle.

- Dispose of any worn accessories and/or the equipment at an
appropriate collection point, as required by state regulations.

How to prepare and use the equipment:

Check that the equipment is completely clean, the power button is
in the OFF position and that the USB cord is not connected to unit
and the USB outlet.

Gently remove the cap from the base and ll the water reservoir
with approximately 2 . oz. (1/4 cup) of cool, clean water. Do NOT ll
water all the way to the rim.

Align the cap to the base of the unit, making sure it is properly
secured in place by aligning the magnets.

Connect the USB cord to the USB input on the humidier, and
connect to the USB outlet on your computer.

5

Press the power button to turn the unit ON.
Vapor will start to exit.
To turn the unit OFF, press the power button or unplug the USB cord

from the outlet.

Cleaning and Maintenance:

- Before cleaning the equipment, always turn the humidier OFF,
and disconnect the USB cord from the unit and USB outlet.

- Do not place the humidier directly under running water.

- Do not wet the USB cord.

- Do not leave water in the water reservoir when the equipment is
not in use.

Remove the cap from the base and pour out all remaining water.
Clean the cap and reservoir of the humidier with a soft, clean cloth

and dry thoroughly.
Remove the reusable wick from the underside of the cap by gently

twisting the wick housing counterclockwise.
Remove the wick from the housing and squeeze any remaining

water out of the wick and let air dry before replacing.
Clean the outer surfaces of the humidier with a soft, damp cloth.
Do not use abrasive products, alcohol, solvents or similar products

which may cause permanent damage to the unit.