Healthrider HRTL1299 User Manual

®

Model No. HRTL12991

Visit our website at

www.proform.com

new products, prizes,

fitness tips, and much more!

Visit our website at

www.healthrider.com

new products, prizes,

fitness tips, and much more!

Serial No.

Write the serial number in the space
above for future reference.

Serial Number Decal

QUESTIONS?

As a manufacturer, we are com­mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, we will guarantee
complete satisfaction through
direct assistance from our fac­tory.

USER'S MANUAL

TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni
cians on our customer hot line
will provide immediate assis­tance, free of charge.

CUSTOMER HOT LINE:

1-800-999-3756

Fri., 6 a.m.– 6 p.m. MST

–

Mon.

CAUTION

Read all precautions and instruc­tions in this manual before using
this equipment. Save this man­ual for future reference.

-

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

EFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

B

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

OW TO USE THE CHEST PULSE SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

H

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

TROUBLE-SHOOTING AND MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

HOW TO ORDER REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Note: An EXPLODED DRAWING is attached in the center of this manual.

IMPORT

ANT PRECAUTIONS

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the

following important precautions and information before operating the treadmill.

1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.

2. Use the treadmill only as described in this
manual.

3. Place the treadmill on a level surface, with
eight feet of clearance behind it. Do not place
the treadmill on any surface that blocks air
openings. To protect the floor or carpet from
damage, place a mat under the treadmill.

4. Keep the treadmill indoors, away from mois­ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.

6. Keep children under the age of 12 and pets
away from the treadmill at all times.

7. The treadmill should not be used by persons
weighing more than 275 pounds. Never allow
more than one person on the treadmill at a
time.

for both men and women.

letic shoes. Never use the treadmill with bare
feet, wearing only stockings, or in sandals.

9. When connecting the power cord (see page

7), plug the power cord into a surge protector
(not included) and plug the surge protector
into a grounded circuit capable of carrying 15
or more amps. No other appliance should be
on the same circuit.

10. Use only a UL-listed surge protector, rated at
15 amps, with a 14-gauge cord of five feet or
less in length. Do not use an extension cord.

11. Keep the power cord and the surge protector
away from heated surfaces.

12. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See
BEFORE YOU BEGIN on page 4 if the tread­mill is not working properly.)

13. Never start the treadmill while you are stand­ing on the walking belt. Always hold the
handrails while using the treadmill.

Always wear ath-

8. Wear appropriate exercise clothing when
using the treadmill. Do not wear loose cloth
ing that could become caught in the treadmill.
Athletic support clothes are recommended

-

The treadmill is capable of high speeds.

14.
Adjust the speed in small increments to avoid
sudden jumps in speed.

2

15. Do not use the hand weights at speeds higher
han a walk. Using hand weights and not hold-

t
ing the handrails may compromise your ability

o maintain your balance. Exercises using

t
hand weights should be attempted only by ex-

erienced users.

p

16. The pulse sensor is not a medical device.

Various factors, including the user's move­ment, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.

17. Never leave the treadmill unattended while it

is running. Always remove the key, unplug
the power cord and move the on/off switch to
the off position when the treadmill is not in
use. (See the drawing on page 4 for the loca­tion of the on/off switch.)

18. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See
ASSEMBLY on page 5, and HOW TO MOVE
THE TREADMILL on page 23.) You must be
able to safely lift 45 pounds (20 kg) in order

to raise, lower, or move the treadmill.

19. When folding or moving the treadmill, make
sure that the storage latch is fully closed.

20. Inspect and tighten all parts of the treadmill
every three months.

21. Never drop or insert any object into any open­ing.

DANGER: Always unplug the power

22.
cord immediately after use, before cleaning
the treadmill, and before performing the main­tenance and adjustment procedures de­scribed in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service
representative only.

23. The treadmill is intended for in-home use
only. Do not use the treadmill in any
commercial, rental, or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decals shown below have been placed on your treadmill. If a decal is missing, or if it is not legible,
please call our Customer Service Department toll-free at 1-800-999-3756 to order a free replacement decal.
Apply the decal in the location shown. Note: The large decal is shown at 38% of actual size.

3

BEFORE YOU BEGIN

ongratulations for purchasing the HealthRider

C
STRIDER S500i™ treadmill. The SOFTSTRIDER S500i
offers an impressive array of features to help you
achieve your fitness goals in the convenience of your
home. From the advanced console to the cushioned
walking belt, the SOFTSTRIDER S500i is designed to
make each workout more effective and enjoyable. And
when you’re not exercising, the SOFTSTRIDER S500i
can be folded away, taking less than half the floor
space of conventional treadmills.

For your benefit, read this manual carefully before
using the treadmill. If you have additional questions,

Hand Weights

chest pulse sensor Holder

Water Bottle Holder*

®

OFT-

S

lease call our Customer Service Department toll-free

p
at 1-800-999-3756, Monday through Friday, 6 a.m.
until 6 p.m. Mountain Time (excluding holidays). To
help us assist you, please note the product model
number and serial number before calling. The model
number is HRTL12991. The serial number can be
found on a decal attached to the treadmill (see the
front cover of this manual for the location).

Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.

Book Holder

Console

Handrail

Foot Rail

BACK

Lock Knob

Walking Belt

Cushioned
Walking Platform

Key/Clip

RIGHT SIDE

On/Off
Switch

Circuit

Breaker

Power

Cord

Rear Roller
Adjustment Bolts

Water bottle is not included.

*

4

ASSEMBLY

Assembly requires two people. Place the treadmill in a cleared area and remove all packing materials. Do not

ispose of the packing materials until the treadmill is assembled.No tools are required.

d

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt, the sides of the walking platform, or
the shipping carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt or
on the sides of the walking platform, wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

1. With the help of a second person, carefully raise the
Uprights (103) until the Wheels (99) are resting on the
floor as shown.

2. Next, make sure that the Lock Knob Sleeve (68) is fully

inserted into the left Upright (103).

Remove the Lock Knob (67) from the Lock Pin (72). Make
sure that the Lock Pin Collar (70) and the Spring (69) are
on the Lock Pin. Insert the Lock Pin into the left Upright
(103) and tighten the Lock Knob onto it.

1

103

99

2

103

69

70

72

67

3. Make sure that all parts are tightened before you use the treadmill. Place a mat beneath the treadmill

to protect the floor or carpet. For your benefit, we recommend that you familiarize yourself with the
TROUBLE-SHOOTING AND MAINTENANCE section on pages 25 through 27.

68

5

HOW TO USE THE CHEST PULSE SENSOR

ach use, it may remain activated longer than nec-

OW TO PUT ON THE CHEST PULSE SENSOR

H

he chest pulse sensor consists of two components:

T
the chest strap and the sensor unit (see the drawing
below). Insert the tab on one end of the chest strap into
one end of the sensor unit, as shown in the inset draw­ing. Press the end of the sensor unit under the buckle
on the chest strap. The tab should be flush with the
front of the sensor unit.

Chest Strap

Tabs

Tab

e
essary, draining the battery prematurely.

• Store the chest pulse sensor in a warm, dry place.
o not store the chest pulse sensor in a plastic bag

D
or other container that may trap moisture.

• Do not expose the chest pulse sensor to direct

sunlight for extended periods of time; do not expose
it to temperatures above 122° Fahrenheit (50°
Celsius) or below 14° Fahrenheit (-10° Celsius).

• Do not excessively bend or stretch the sensor unit

when using or storing the chest pulse sensor.

• Clean the sensor unit using a damp cloth—never

use alcohol, abrasives, or chemicals. The chest
strap may be hand washed and air dried.

CHEST PULSE SENSOR TROUBLE-SHOOTING

Sensor Unit

Next, wrap the
chest pulse sen­sor around your
chest and attach
the other end of
the chest strap to
the sensor unit.
Adjust the length
of the chest strap,
if necessary. The
chest pulse sen­sor should be under your clothing, tight against your
skin, and as high under the pectoral muscles or
breasts as is comfortable. Make sure that the logo on
the sensor unit is facing forward and is right-side-up.

Pull the sensor unit away from your body a few inches
and locate the two electrode areas on the inner side.
The electrode areas are the areas covered by shallow
ridges. Using saline solution such as saliva or contact
lens solution, wet both electrode areas. Return the
sensor unit to a position against your chest.

CHEST PULSE SENSOR CARE AND MAINTENANCE

Sensor

Unit

Buckle

The instructions on the following pages explain
how the chest pulse sensor is used with the con­sole. If the chest pulse sensor does not function
properly, try the steps below.

• Make sure that the chest pulse sensor is under your

clothing, tight against your skin, and as high under
the pectoral muscles or breasts as is comfortable.
The logo on the sensor unit must be facing forward
and be right-side-up. Note: If the chest pulse sensor
does not function when positioned as described, try
moving it slightly lower or higher on your chest.

• Use saline solution such as saliva or contact lens

solution to wet the two electrode areas on the
sensor unit. If heart rate readings do not appear until
you begin perspiring, re-wet the electrode areas.

As you walk or run on the treadmill, position your-

•

self near the center of the walking belt. For the

console to display heart rate readings, the user
must be within arm’s length of the console.

• The chest pulse sensor is designed to work with

people who have normal heart rhythms. Heart rate
reading problems may be caused by medical
conditions such as premature ventricular contrac­tions (pvcs), tachycardia bursts, and arrhythmia.

Thoroughly dry the chest pulse sensor after each

•
use. The chest pulse sensor is activated when the
electrode areas are wetted and the heart rate
monitor is put on; the chest pulse sensor shuts off
when it is removed and the electrode areas are
dried. If the chest pulse sensor is not dried after

6

The operation of the chest pulse sensor can be

•
affected by magnetic interference caused by high
power lines or other sources. If it is suspected that
this is a problem, try relocating the treadmill.

The CR2032 battery may need to be replaced (see

•
page 27).

OPERATION AND ADJUSTMENT

HE PERFORMANT LUBE

T

Your treadmill features a walking belt coated with
PERFORMANT LUBETM, a high-performance lubricant.

IMPORTANT: Never apply silicone spray or other

ubstances to the walking belt or the walking plat-

s
form. Such substances will deteriorate the walking
belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

TM

ALKING BELT

W

DANGER: Improper connection

of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or service­man if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the product—if it will
not fit the outlet, have a proper outlet in­stalled by a qualified electrician.

Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your home’s power.
Voltage surges, spikes, and noise interference can re­sult from weather conditions or from other appliances
being turned on or off.

To decrease the pos­sibility of your tread­mill being damaged,
always use a surge
protector (not in­cluded) with your
treadmill.

1

Grounded Outlet Box

Grounding Pin

f electric shock. This product is equipped with a cord

o
having an equipment-grounding conductor and a
grounding plug. Plug the power cord into a surge

protector, and plug the surge protector into an ap­propriate outlet that is properly installed and

rounded in accordance with all local codes and

g
ordinances.

This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug illus­trated in drawing 1 below. A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge protector to a 2-pole recep­tacle as shown in drawing 2 if a properly grounded out­let is not available.

The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.

The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw.

covers are not grounded. Contact a qualified elec­trician to determine if the outlet box cover is
grounded before using an adapter.

Grounding Plug

Some 2-pole receptacle outlet box

Treadmill Power Cord

Grounding Plug

Surge protectors are
sold at most hardware
stores and department
stores. Use only a UL­listed surge protector,
rated at 15 amps, with a
14-gauge cord of five
feet or less in length.

This product must be
grounded. If it should

malfunction or break
down, grounding pro­vides a path of least re
sistance for electric cur
rent to reduce the risk

Grounded Outlet

2

-

-

Metal Screw

Grounded Outlet Box

Adapter

Grounding Pin

Grounding Plug

Lug

Grounding Pin

Surge Protector

7

DIAGRAM OF THE CONSOLE

B

K

L

C

M

N

P

R

A

D E

I

FEATURES OF THE CONSOLE

The treadmill console offers an impressive selection of
features to help you get the most from your exercise.

When the console is in the manual mode, the speed
and incline of the treadmill can be changed with a
touch of a button. As you exercise, the four displays
will show your workout time, the number of calories
you have burned, the distance you have walked, the
incline level of the treadmill, and the speed of the walk­ing belt. The console will also show your heart rate
when the chest pulse sensor is worn.

The console also offers six preset workout programs.
Each program automatically controls the speed and
incline of the treadmill as it guides you through an effec
tive workout. The included hand weights can be used for
upper body exercise as well. Two pulse programs are
also offered. Each program automatically adjusts the
speed and incline of the treadmill to keep your heart rate
within a preset range during your workout.

The console even allows you to create your own work­out programs and store them in memory for future use.

The console also features advanced iFit.com technol­ogy. IFit.com technology is like having a personal
trainer right in your home. Using the included audio
cable, you can connect the treadmill to your home
stereo, portable stereo, or computer and play special
iFit.com CD programs (CD’s are available separately).
IFit.com CD programs automatically control the speed

8

O

F

G

-

H

J

and incline of the treadmill as a personal trainer guides
you through every step of your workout. High-energy
music provides added motivation. Each CD features
two programs designed by certified personal trainers.

In addition, you can connect the treadmill to your VCR
and TV and play iFit.com video programs (videocas­settes are available separately). Video programs offer
the same benefits as iFit.com CD programs, but add
the excitement of working out with a class and an
instructor—the hottest new trend at health clubs.

With the treadmill connected to your computer, you
can also go to our new internet site at www.iFit.com
and access basic programs, audio programs, and
video programs directly from the internet. And by
adding an optional upgrade module to the treadmill,
you can use virtually endless features from our internet
site. See www.iFit.com for complete details.

To purchase iFit.com CD’s, iFit.com videocassettes,
or an optional upgrade module, call toll-free 1-800-735-

0768. For information about an optional handgrip pulse

sensor, see page 22.

To use the manual mode of the console, follow the
steps beginning on page 10. To use preset programs,
see page 12. To use pulse programs, see page 13. To
create and use custom programs, see pages 15 and

16. To use iFit.com CD or video

19. To use iFit.com programs directly from our

internet site, see page 21.

Q

S T

Note: If there is a thin
sheet of clear plastic
on the face of the
console, remove it.

programs

U

, see page

ESCRIPTION OF THE CONSOLE

D

Refer to the drawing on page 8 to identify the features
described below.

. Water bottle holder—This convenient holder keeps

A

your water bottle handy during your workouts (no
water bottle is included).

. Pulse/Calories display—This display shows the

M

approximate number of calories you have burned.
When the chest pulse sensor is worn, the display
will also show your heart rate. The display will alter-

ate between one number and the other every

n

even seconds. If the optional handgrip pulse sensor

s
is used, the display will show your heart rate contin­uously while your hands are on the pulse sensor.

B. Hand weight holder—These compartments hold the

included hand weights.

C. Book holder—This area is designed to hold your

favorite magazine or the latest best-seller.

D. Incline buttons—These buttons control the incline of

the treadmill. Each time a button is pressed, the
incline will change by 0.5%. The incline range is 0%
to 10%.

E. Speed buttons—These buttons control the speed of

the walking belt. Each time a button is pressed, the
speed will change by 0.1 mph; if a button is held
down, the speed will change in increments of 0.5
mph. The speed range is 0.5 mph to 10 mph.

F. Quick Speed buttons—These buttons allow you to

quickly select speed settings.

G. Start button—This button is used to start the walking

belt.

H. Stop buttons—These buttons are used to stop the

walking belt. Note: Pressing either button will stop
the walking belt.

I.

Waistband clip—This clip is designed to be worn on
the waistband of your clothes. If the key is pulled
from the console, the walking belt will automatically
stop.

N. Distance/Incline display—This display shows the

distance you have walked and the incline level of
the treadmill. The display will alternate between one
number and the other every seven seconds. Note:
Each time the Incline buttons are pressed, the dis­play will change to show the incline setting.

O. Speed display—This display shows the speed of

the walking belt.

and

P. Enter button and

s

s

buttons—These buttons

tt

are used to enter your age when pulse programs
are used.

Q. Record button—This button is used to program

speed and incline settings for custom programs.

R. Program display—When the manual mode or an

iFit.com program is selected, this display will show
your progress on an LED track. When a preset
program, a pulse program, or a custom program is
selected, the display will show the settings for the
program.

S. Select Workout button—This button is used to select

the manual mode, the preset programs, the pulse
programs, the custom programs, and iFit.com pro­grams. Note: If the walking belt is moving when the
Select Workout button is pressed, the walking belt
will slow to a stop, the displays will be reset, and a
new program or the manual mode will be selected.

J. Key—This key turns the console on and off.

K. Time/Segment Time display—When the manual

mode or an iFit.com program is selected, this display
will show the elapsed time. When a preset program,
a pulse program, or a custom program is selected,
the display will show both the time remaining in the
program and the time remaining in the current
segment of the program. The display will alternate
between one number and the other every seven
seconds.

L. Cross Training indicator—During the Fitnesswalk,

Cardiojog, or Cardiorun programs, this indicator will
periodically flash. The included hand weights can
be used while the indicator is flashing to add upper
body exercise to your workouts.

T. Mode indicators—These indicators show whether

the manual mode, a preset program, a pulse pro­gram, a custom program, or an iFit.com program is
selected.

U. Program profiles—These profiles show how the

speed and incline of the treadmill will change during
preset programs and how the target heart rate will
change during pulse programs.

Note: The console can display exercise feedback
in either miles or kilometers (see SPEED DISPLAY
on page 11). For simplicity, all instructions in this
section refer to miles.

9

WARNING: To reduce the risk of

erious injury, read the following precautions

s
before operating the console.

• Do not stand on the walking belt when turn­ng on the power or starting the walking belt.

i

• Always attach the clip (see “I”on page 8) to

our waistband when using the treadmill. If

y
the key is pulled from the console, the walk­ing belt will stop.

• The treadmill is capable of high speeds.

Adjust the speed in small increments.

• To reduce the risk of electric shock, keep

liquids away from the console and place only
a sealed water bottle in the console.

• Using hand weights and not holding the

handrails may compromise your ability to
maintain your balance. Exercises using hand
weights should be attempted only by experi­enced users.

• If you have heart problems, or if you are over

60 years of age and have been inactive, do
not use the pulse programs. If you are taking
medication regularly, consult your physician
to find whether the medication will affect
your exercise heart rate.

HOW TO TURN ON THE POWER

Plug in the power cord (see HOW TO PLUG IN

1

THE POWER CORD on page 7).

Locate the on/off

2

switch on the front of
the treadmill near the
power cord. Move
the on/off switch to
the on position.

Stand on the foot

3

rails of the treadmill.
Find the clip attached
to the key and slide
the clip fully onto the
waistband of your
clothing. Next, insert
the key into the console. After a moment,
displays, the LED track, and various indicators will
light.

10

On

Position

the

OW TO USE THE MANUAL MODE

H

nsert the key into the console.

I

1

ee HOW TO TURN ON THE POWER at the left.

S

Select the manual mode.

2

When the key is in­serted, the manual
mode will be selected
and the manual indica­tor will light. If a program
is selected, press the
Select Workout button
repeatedly to select the manual mode.

Put on the chest pulse sensor if desired.

3

For the Pulse/Calories display to show your heart
rate, the chest pulse sensor must be worn. To put
on the chest pulse sensor, see page 6.

Press the Start button or the Speed

4

start the walking belt.

A moment after the button is pressed, the walking
belt will begin to move at 1.0 mph. Hold the hand­rails and begin walking.

As you exercise, adjust
the speed of the walking
belt as desired by press­ing the Speed buttons or
the Quick Speed but­tons. Note: After the but­tons are pressed, it may
take a moment for the walking belt to reach the
selected speed setting.

To stop the walking belt, press either of the Stop
buttons. The displays will pause and the Time/
Segment Time display will begin to flash. To
restart the walking belt, press the Start button or

the Speed
reset the displays, press a Stop button, remove
the key, and then reinsert the key.

Adjust the incline of the treadmill as desired.

button. To stop the walking belt and

s

s

s

s

5

To vary the intensity of
your exercise, adjust the
incline of the treadmill
by pressing the Incline
buttons.
buttons are pressed, it
may take a moment for
the treadmill to reach the selected incline setting.

Note: After the

button to

Follow your progress with the LED track and

6

the four displays.

LED Track—When the

manual mode or an

Fit.com program is

i
selected, the program
display will show a
track representing a
distance of 1/4 mile. As
you exercise, the indicators around the track will
light one at a time until the entire track is lit. A new
lap will then begin.

Time/Segment Time
display

manual mode or an
iFit.com program is
selected, this display
will show the elapsed
time. When a preset
program, a pulse program, or a custom program is
selected, the display will show both the time re­maining in the program and the time remaining in
the current segment of the program. The display
will alternate between one number and the other
every seven seconds.

Note: During the Fitnesswalk, Cardiojog, or
Cardiorun programs, the Cross Training indicator
below the display will periodically flash. While the
indicator is flashing, the included hand weights can
be used for upper body exercise as you walk on the
treadmill.

Pulse/Calories
display—This display

shows the approximate
number of calories you
have burned. When the
chest pulse sensor is
worn, the display will
also show your heart rate. The display will alternate
between one number and the other every seven
seconds. If the optional handgrip pulse sensor is
used, the display will show your heart rate contin­uously while your hands are on the pulse sensor.

—When the

Distance/Incline
display—This display

hows the distance you

s
have walked and the

ncline level of the tread-

i
mill. The display will
alternate between one
number and the other every seven seconds. Note:
Each time the Incline buttons are pressed, the dis­play will change to show the incline setting.

Speed display—This
display shows the speed
of the walking belt.

Note: The speed can be displayed in either miles
per hour (mph) or kilometers per hour (kph). To
see which unit of measurement is selected, hold
down one of the Stop buttons while inserting the
key into the console. The Speed display will show
an “E” for English miles or an “M” for metric kilo­meters. Pressing the Speed
the unit of measurement. When the desired unit of
measurement is selected, remove and then rein­sert the key.

When you are finished exercising, stop the

7

walking belt and remove the key.

Step onto the foot rails, press one of the Stop but­tons, and adjust the incline of the treadmill to 0%.

The incline must be at 0% when the treadmill is
raised to the storage position or the treadmill
will be damaged. Next, remove the key from the
console and put it in a secure place. Note: If the
displays and indicators on the console remain
lit after the key is removed, the console is in
the “demo” mode. Refer to page 22 and turn off
the demo mode.

When you are finished using the treadmill, move
the on/off switch near the power cord to the off
position and unplug the power cord.

button will change

s

s

11