Healthrider HREL2005.0 User Manual

Model No. HREL2005.0

Visit our website at

www.healthrider.com

new products, prizes,

fitness tips, and much more!

Serial No.

Serial Number

Decal

QUESTIONS?

As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or if parts are damaged or missing, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT DIRECTLY.

CALL TOLL-FREE:

1-888-922-4222

Mon.–Fri., 6 a.m.–6 p.m. MST

USER'S MANUAL

THE WEB:

ON www.healthriderservice.com

CAUTION

Read all precautions and instructions in this manual before using this equipment. Keep this manual for future reference.

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

HOW TO USE THE ELLIPTICAL EXERCISER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

AINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

HOW TO ORDER REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

IMPORTANT PRECAUTIONS

WARNING:

tions before using the elliptical exerciser.

1. Read all instructions in this manual and all warnings on the elliptical exerciser before using the elliptical exerciser.

2. It is the responsibility of the owner to ensure that all users of the elliptical exerciser are adequately informed of all precautions.

3. The elliptical exerciser is intended for home use only. Do not use the elliptical exerciser in a commercial, rental, or institutional setting.

4. Keep the elliptical exerciser indoors, away from moisture and dust. Place the elliptical exerciser on a level surface, with a mat beneath it to protect the floor or carpet. Make sure that there is enough clearance around the elliptical exerciser to mount, dismount, and use it.

5. Inspect and properly tighten all parts regu-

. Replace any worn parts immediately

larly

6. Keep children under 12 and pets away from the elliptical exerciser at all times.

To reduce the risk of serious injury, read the following important precau-

7. The elliptical exerciser should not be used by persons weighing more than 250 pounds.

8. Wear appropriate exercise clothes when using the elliptical exerciser. Always wear athletic shoes for foot protection while exercising.

9. When mounting and dismounting the elliptical exerciser, always hold the handlebars and step onto and off the pedal that is in the lowest position.

10. The pulse sensor is not a medical device. Various factors may affect the accuracy of heart rate readings. The pulse sensor is intended only as an exercise aid in determining heart rate trends in general.

1. Keep your back straight when using the ellip-

exerciser; do not arch your back.

tical

If you feel pain or dizziness while exercising,

12. stop immediately and cool down.

13. When you stop exercising, allow the pedals to slowly come to a stop.

WARNING:Before beginning this or any exercise program, consult your physician.

This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

BEFORE YOU BEGIN

Thank you for selecting the new HEALTHRIDER C 300E low-impact elliptical exerciser. The C 300E is an incredibly smooth exerciser that moves your feet in a natural elliptical path, minimizing the impact on your

nees and ankles. Welcome to a whole new world of

atural, elliptical-motion exercise.

For your benefit, read this manual carefully before you use the elliptical exerciser. If you have ques-

tions after reading this manual, see the front cover of this manual. To help us assist you, please note the product model number and serial number before call-

Water Bottle Holder (Bottle is not included)

Console

ing. The model number is HREL2005.0. The serial number can be found on a decal attached to the elliptical exerciser (see the front cover of this manual).

o avoid a registration fee for any service needed

nder warranty, you must register the elliptical

u exerciser at www.healthriderservice.com/registration.

Before reading further, please familiarize yourself with the parts that are labeled in the drawing below.

Handlebar

FRONT

Side Shield

Pedal Disk

BACK

Upright

RIGHT SIDE

Pedal

Pedal Arm

The decal shown above has been placed on the elliptical exerciser. If the decal is missing, or if it is illegible, call the toll-free telephone number on the front cover of this manual and order a free replacement decal. Apply the decal in the location shown.

M8 x 25mm Button

Screw (51)–4

M8 Nylon

Locknut (46)–4

M8 Split

Washer (49)–4

M10 Split

Washer (67)–2

M10 Nylon

Locknut (29)–6

M10 x 25mm Button

Screw (21)–2

M4 x 16mm

Screw (66)–4

M4 x 19mm

Screw (33)–6

M8 x 45mm Button

Bolt (50)–4

Bolt Set (27)–2

M10 x 68mm

Carriage Bolt (19)–2

M10 x 75mm

Carriage Bolt (34)–2

Handlebar Axle Cap (17)–2

Pedal Arm Axle Cap (16)–2

ASSEMBLY

To hire an authorized service technician to assemble the elliptical exerciser, call toll-free 1-800-445-2480.

Assembly requires two persons.

acking materials. Do not dispose of the packing materials until assembly is completed.

Assembly requires a phillips screwdriver , two adjustable wrenches , and a rubber mallet .

See the drawings below to identify the small parts needed for assembly. The number in parenthesis below each drawing is the key number of the part, from the PART LIST on page 14. The number following the key number is the quantity needed for assembly.

part is not found in the parts bag, check to see if it has been pre-assembled.

Place all parts of the elliptical exerciser in a cleared area and remove the

Note: Some small parts may have been pre-assembled. If a

1. Attach the Rear Stabilizer (4) to the Frame (1) with two M10 x 75mm Carriage Bolts (34) and two M10

ylon Locknuts (29).

2. Hold the Lower Cable (15) and the Lower Wire Harness (65) in the indicated slot in the Frame (1), and insert the Front Stabilizer (3) into the Frame. Make

sure that the Front Stabilizer is oriented as shown. Be careful to avoid pinching the Lower Cable and the Lower Wire Harness.

the elliptical exerciser onto one side, and attach the Front Stabilizer (21) and two M10 Split Washers (67).

the Button Screws yet.

3. Hold the Console Bracket (26) near the Upright (2), and locate the wire extending from the bottom of the Console Bracket. Carefully pull the upper end of the Upper Wire Harness (55) to remove any slack, and tie the wire around the Upper Wire Harness, as shown in the inset drawing. Carefully pull the wire up through the Console Bracket until the Upper Wire Harness is extending from the top of the Console Bracket. Then, untie the wire and discard it.

with two M10 x 25mm Button Screws

Carefully tip

Do not tighten

Slot

Wire

Insert the Console Bracket (26) into the Upright (2).

Be careful to avoid pinching the Upper Wire Harness (55). Attach the Console Bracket with four

M8 x 25mm Button Screws (51) and four M8 Split Washers (49).

4. The Console (5) requires three “AA” batteries (not included); alkaline batteries are recommended. Insert three batteries into the Console; make sure that the

batteries are oriented as shown by the diagram inside of the Console.

Batteries

+ 11 hidden pages