HealthRider HRCR48961 Owner's Manual
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
MPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
I
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
HOW TO USE THE EXERCISER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
WARNING DECAL PLACEMENT
This drawing shows the location(s) of the warning decal(s). If a decal is
missing or illegible, see the front cover of this manual and request
a free replacement decal. Apply the decal in the location shown.
Note: The decal(s) may not be shown at actual size.
HEALTHRIDER is a registered trademark of ICON IP, Inc.
2
IMPORTANT PRECAUTIONS
WARNING: T
instructions in this manual and all warnings on your exerciser before using your exerciser. ICON
assumes no responsibility for personal injury or property damage sustained by or through the use
of this product.
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or
persons with pre-existing health problems.
2. It is the responsibility of the owner to ensure
that all users of the exerciser are adequately
informed of all precautions.
3. Use the exerciser only as described in this
manual.
4. The exerciser is intended for home use only.
Do not use the exerciser in a commercial,
rental, or institutional setting.
5. Keep the exerciser indoors, away from
moisture and dust. Place the exerciser on a
level surface, with a mat beneath it to protect
the floor or carpet. Make sure that there is
enough clearance around the exerciser to
mount, dismount, and use it.
o reduce the risk of serious injury, read all important precautions and
7. Wear appropriate clothes while exercising;
do not wear loose clothes that could become
caught on the exerciser. Always wear athletic
shoes for foot protection.
8. Keep children under age 12 and pets away
from the exerciser at all times.
9. The exerciser should not be used by
persons weighing more than 400 lbs.
(181 kg).
10. Do not operate the exerciser without the
cylinder shields in place.
11. Keep your back straight while using the
exerciser; do not arch your back.
12. Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
6. Regularly inspect and tighten all parts of the
exerciser.
3
BEFORE YOU BEGIN
Thank you for selecting the new HEALTHRIDER®HR2
exerciser. The HEALTHRIDER HR2 exerciser offers a
unique form of low-impact exercise that uses both the
upper body and the lower body for greater cardiovascular benefits and increased toning.
For your benefit, read this manual carefully before
you use the exerciser. If you have questions after
Console
Collar
Seat Handle
reading this manual, please see the front cover of this
manual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Handlebar
Handlebar Knob
Seat
Seat Knob
Upper Pedal
Lower Pedal
4
M10 Curved
Washer (59)–7
M10 Split
Washer (57)–1
M6 Split
Washer (56)–1
M10 x 75mm Button Screw (42)–4
M8 Curved
Washer (60)–4
M8 x 40mm Button
Bolt (39)–4
M8 Locknut
(40)–4
M6 x 10mm
Screw (55)–1
M6 x 16mm
Screw (41)–4
M10 x 54mm Button
Screw (48)–3
M10 Locknut
(52)–2
ASSEMBLY
o hire an authorized service technician to assemble the exerciser, call 1-800-445-2480.
T
Assembly requires two persons. Place all parts of the exerciser in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires a Phillips screwdriver and an
adjustable wrench .
As you assemble the exerciser, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number
following the parentheses is the quantity needed for assembly. Note: If a part is not in the hardware kit,
check to see if it has been preassembled.
5
1.
To make assembly easier, read the
nformation on page 5 before you begin.
i
Press a Stabilizer Cap (11) onto each end of a
Stabilizer (10).
Attach the Stabilizer (10) to the front of the
Frame (1) with two M10 x 75mm Button Screws
(42) and two M10 Curved Washers (59).
1
1
1
1
42
59
11
10
2. Press a Stabilizer Cap (11) onto each end of
the other Stabilizer (10).
Attach the Stabilizer (10) to the rear of the
Frame (1) with two M10 x 75mm Button Screws
(42) and two M10 Curved Washers (59).
3. Identify the Left Pedals (24), which are marked
with “L” stickers.
Using an adjustable wrench, firmly tighten the
Left Pedals counterclockwise into the Pedal
Frame (5).
2
1
10
11
3
5
59
25
11
59
42
Firmly tighten the Right Pedals (25) clockwise
into the Pedal Frame (5).
IMPORTANT: After using the exerciser for
one week, retighten the Pedals (24, 25). For
the best performance, keep the Pedals tightened.
24
6
Loading...