Healthrider HRCR28720 User Manual
Model No. HRCR28720
Serial No.
The serial number can be found in
the location shown below. Write the
serial number in the space above.
CAUTION
Read all precautions and instructions in this manual before
using this equipment. Save this
manual for future reference.
Serial
Number
Decal
USER'S MANUAL
Patent Pending
QUESTIONS?
We are committed to providing
complete customer satisfaction. If you have questions, or
if there are missing parts, we
will guarantee complete satisfaction through direct assistance from our factory.
TO AVOID DELAYS, PLEASE
CALL DIRECT TO OUR TOLLFREE CUSTOMER HOT LINE.
The trained technicians on our
customer hot line will provide
immediate assistance, free of
charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.–Fri., 6 a.m.–6 p.m. MST
Visit our website at
www.healthrider.com
new products, prizes,
fitness tips, and much more!
2
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ADJUSTMENT AND OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
MAINTENANCE AND TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read the following important precau-
tions before using the HealthRider
®
AEROBIC RIDER 2.
1. Read all instructions in this manual before
using the AEROBIC RIDER 2.
2. It is the responsibility of the owner to ensure
that all users of the AEROBIC RIDER 2 are
adequately informed of all precautions.
3. The AEROBIC RIDER 2 should not be used
by persons weighing more than 250 pounds.
4. Keep children under the age of 12 and pets
away from the AEROBIC RIDER 2 at all
times.
5. Place the AEROBIC RIDER 2 on a level surface during use. Cover the floor beneath the
AEROBIC RIDER 2 to protect it.
6. Regularly inspect and tighten all parts of the
AEROBIC RIDER 2.
7. When exercising, do not wear loose clothing
that could become caught on the AEROBIC
RIDER 2. Always wear athletic shoes.
8. The total weight of the user and the added
weights should not exceed 300 pounds.
9. Use the AEROBIC RIDER 2 only as described
in this manual.
10. The AEROBIC RIDER 2 is intended for home
use only. Do not use the AEROBIC RIDER 2
in any commercial, rental, or institutional
setting.
WARNING: Before beginning this or any exercise program, consult your physician.
This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or
property damage sustained by or through the use of this product.
3
BEFORE YOU BEGIN
Thank you for selecting the new HealthRider®AEROBIC
RIDER 2. The AEROBIC RIDER 2 offers a unique
form of low-impact exercise that uses both the upper
body and the lower body for greater cardiovascular
benefits and increased toning.
For your benefit, please read this manual carefully
before using the AEROBIC RIDER 2. If you have
questions after reading this manual, please call our
Customer Service Department toll-free at 1-800-999-
3756, Monday through Friday, 6 a.m. until 6 p.m.
Mountain Standard Time (excluding holidays). To help
us assist you, please note the product model number
and serial number before calling. The model number is
HRCR28720. The serial number can be found on a
decal attached to the AEROBIC RIDER 2 (see the front
cover of this manual).
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Handlebar
Padded Seat
Upper Pedals
Seat Knob
(Behind
Side Shield)
Lower Pedals
Monitor
Weight Tube
Weight Collar
Weight
Center Post
4
ASSEMBLY
Before beginning assembly, carefully read the
following information and instructions:
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials; do not dispose of the packing
materials until assembly is completed.
• Read each assembly step before you begin.
• To identify the small parts used in assembly, use
the part identification chart below. The number in parenthesis below each part refers to the
key number of the part. The second number
refers to the quantity needed for assembly. Note:
Some parts may have been pre-attached for
shipping purposes. If a part is not in the parts
bag, check to see if it has been pre-attached.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• During assembly, make sure that all parts are oriented as shown in the drawings.
THE FOLLOWING TOOLS (NOT INCLUDED)
ARE REQUIRED FOR ASSEMBLY:
• Two adjustable wrenches
• Lubricant, such as petroleum jelly or grease,
is also required.
Assembly will be more convenient if you have the
following tools: A socket set, a set of open-end or
closed-end wrenches, and a rubber mallet.
Plastic Washer (49)–2
M6 Hex Nut (54)–4
M6 x 60mm Bolt (53)–4
M6 Flat Washer (55)–4
Axle Fastener (56)–4
(either Bolts or Acorn Nuts)
Frame Axle (13)–2 (Internal Thread)
OR
Frame Axle (13)–2 (External Thread)
M8 x 120mm Bolt (57)–1
Rubber Washer (51)–4
M8 Nylon Jam Nut (7)–2
M8 x 1.375” Bolt (17)–1
5
1. Before beginning assembly, make sure that you
have read and understand the information on
page 4.
Attach one of the Stabilizers (31) to the Main Frame
(1) with two M6 x 60mm Bolts (53), two M6 Flat
Washers (55), and two M6 Hex Nuts (54).
1
31
54
55
53
1
1
45
58
58
45
45
34
54
55
1
31
53
2. Attach the other Stabilizer (31) to the Main Frame
(1) with two M6 x 60mm Bolts (53), two M6 Flat
Washers (55), and two M6 Hex Nuts (54).
3. Attach the Front Cover Panel (34) to the Main
Frame (1) using four Fastener Bases (45) and four
Fastener Pins (58). First, insert the Fastener Bases
through the Front Cover Panel and into the Main
Frame. Next, push a Fastener Pin (58) into the hole
in each Fastener Base until it is flush with the Base.
4. Lubricate a Frame Axle (13). Attach the Handlebar
Swing Arm (5) to the Main Frame (1) with the
Frame Axle, two Rubber Washers (51), and two
Axle Fasteners (56).
Note: If the ends of the Frame Axles (13) are
internally threaded, the Axle Fasteners (56) will
be bolts; if the ends are externally threaded, the
Axle Fasteners will be acorn nuts (see the part
identification chart on page 4).
4
3
1
51
56
51
56
5
Lubricate—13
2
Loading...