Healthrider 831.287940 User Manual

Model No. 831.287940 Serial No.

Patent Pending

The serial number can be found in the location shown below. Write the serial number in the space above.

CAUTION

Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference.

USER'S MANUAL

Serial Number Decal

SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179

QUESTIONS?

PLEASE CALL DIRECT TO OUR TOLL-FREE CUSTOMER HOT LINE. The trained technicians on our customer hot line will provide immediate assistance, free of charge.

CUSTOMER HOT LINE:

1-800-999-3756

Mon.–Fri., 6 a.m.–6 p.m. MST

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

ADJUSTMENT AND OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

MAINTENANCE AND TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

FULL 90 DAY WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of serious injury, read the following important precautions before using the AEROBIC RIDER 2®by HEALTHRIDER®.

1. Read all instructions in this manual before using the AEROBIC RIDER 2®.

2. It is the responsibility of the owner to ensure that all users of the AEROBIC RIDER 2

are

adequately informed of all precautions.

3. The AEROBIC RIDER 2®should not be used by persons weighing more than 250 pounds.

4. Keep children and pets away from the AEROBIC RIDER 2®at all times.

5. Place the AEROBIC RIDER 2®on a level surface during use. Cover the floor beneath the AEROBIC RIDER 2®to protect it.

6. Regularly inspect and tighten all parts of the AEROBIC RIDER 2

7. When exercising, do not wear loose clothing that could become caught on the AEROBIC RIDER 2

. Always wear athletic shoes.

8. The total weight of the user and the added weights should not exceed 300 pounds.

9. Use the AEROBIC RIDER 2®only as described in this manual.

10. The AEROBIC RIDER 2®is intended for home use only. Do not use the AEROBIC RIDER 2

in any commercial, rental, or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

BEFORE YOU BEGIN

Thank you for selecting the new AEROBIC RIDER 2

by HEALTHRIDER®. The AEROBIC RIDER 2®offers a unique form of low-impact exercise that uses both the upper body and the lower body for greater cardiovascular benefits and increased toning.

For your benefit, please read this manual carefully before using the AEROBIC RIDER 2

HEALTHRIDER®. If you have additional questions,

please call our toll-free HELPLINE at 1-800-999-3756, Monday through Saturday, 7 a.m. until 7 p.m. Central

Time (excluding holidays). To help us assist you, please note the product model number and serial number before calling. The model number is

831.287940. The serial number can be found on a

decal attached to the AEROBIC RIDER 2®(see the front cover of this manual).

Before reading further, please review the drawing below and familiarize yourself with the parts that are labeled.

Handlebar

Padded Seat

Upper Pedals

Seat Knob

(Behind Weight

Saddle)

Pedal

Monitor

Weight Tube

Weight Collar

Weight

Center Post

ASSEMBLY

Before beginning assembly, carefully read the following information and instructions:

• Place all parts in a cleared area and remove the packing materials; do not dispose of the packing materials until assembly is completed.

• Read each assembly step before you begin.

• For help identifying the small parts used in assembly, use the part identification chart below. The number in parenthesis below each part refers to the key number of the part. The second number refers to the quantity needed for assembly. Note: Some small parts may have

been pre-attached for shipping purposes. If a part is not in the parts bag, check to see if it has been pre-attached.

• Tighten all parts as you assemble them, unless instructed to do otherwise.

• During assembly, make sure that all parts are oriented as shown in the drawings.

THE FOLLOWING TOOLS (NOT INCLUDED) ARE REQUIRED FOR ASSEMBLY:

• Two (2) adjustable wrenches

• One (1) phillips screwdriver

• You will also need some lubricant, such as petroleum jelly or grease.

Assembly will be more convenient if you have the following tools: Asocket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches.

Weight T ube Screw (54)–1

1/4” Flat Washer (57)–14 M9 Rubber Sheild Washer (58)–4

M6 Square Nut (4)–2

M6 x 35mm Bolt (3)–2 M6 x 40mm Bolt (60)–6

M6 Hex Nut (2)–6

3/8” Flat Washer (55)–4

3/8” Nylon Lock Nut (31)–1

3/8” Pivot Bushing (41)–1

M8 Acorn Nut (56)–4

3/8” x 1 3/8” Shoulder Bolt (61)–1

M8 x 157mm Axle (59)–2

1. Before beginning assembly, be sure that you

have read and understand the information on the previous page.

Attach the Front Stabilizer (28) to the Main Frame (47) with four M6 X 40mm Bolts (60), eight 1/4” Flat Washers (57), and four M6 Hex Nuts (2).

2. Attach the Rear Stabilizer (25) to the Main Frame (47) with two M6 X 40mm Bolts (60), four 1/4” Flat Washers (57), and two M6 Hex Nuts (2).

3. Lubricate a M8 x 157mm Axle (59). Attach the Pedal Frame (30) to the Main Frame (47) with the M8 x 157mm Axle, two M9 Rubber Shield Washers (58), two 5/16” Washers (55), and two M8 Acorn Nuts (56).

Lubricate—59

+ 11 hidden pages