Health Mate Enrich 2, Enrich 3 Owner's Manual
enrich mate
enrich 2 &3 owner’s manual
operating instructions for your
Health Mate
guidelines and helpful tips
Congratulations on your purchase of your Health Mate® Far Infrared Sauna.
We are condent that you will enjoy the many benets for years to come.
Carefully read this manual before using your Health Mate
time. We recommend keeping this manual for review and future reference.
healthmatesauna.com
®
far infrared sauna
®
Sauna for the rst
health mate
®
the leader of infrared wellness since 1979
Welcome to the Health Mate® Family!
As the leading creator of infrared sauna wellness for over 35 years, Health Mate
Infrared Sauna continues to provide excellent craftsmanship and innovative technology;
hand selected from 100% Western Red Cedar, and crafted from nature to nurture.
We attribute this growth and success entirely to our customer satisfaction, the recognized
health benets, and the quality of our superior craftsmanship. At Health Mate
the nest materials combined with state-of-the-art construction and the highest safety
standards in the industry.
Within the family of Health Mate collections, enjoy such features as our patented and
lifetime-warrantied TECOLOY
wood, LED color lighting, Bluetooth
®
infrared heaters, responsibly and sustainably certied
®
compatible audio components, and additional
characteristics designed to treat the needs of one’s lifestyle and wellness.
We are so happy to have you join us and look forward to sharing in your experience as you
revitalize with the dierence Health Mate
®
provides: a dierence in benets, quality, and
attitude as we support you along your journey through health and wellness!
Happy healing to you and your new mate,
Your Health Mate
®
Family
®
HM
Headquarters, PLH Products Inc., California
®
Far
®
, we use only
table of contents
a
b
c
d
e
f
Installation and Maintenance: 1. Location, Cleaning & Maintenance
2. Assembly Guide
Getting Started
Helpful Tips for Enjoying Your Sauna Sessions
Safety Precautions for Your Health Mate Sauna
Troubleshooting Guide
Optional Accessories: a. Outdoor Cover
4
5
12
18
21
23
26
b. Accessories in Western Red Cedar
g
healthmatesauna.com
Limited Warranty
The information contained in this manual is subject to change without notice.
29
30
3
a. installation & maintenance
1) choosing a location
In determining a location for your Health Mate Infrared Sauna,
there are two important things to keep in mind: First, the sauna
should always be placed on a level surface. Second, the sauna
must be placed in a dry area.
The installation requirements for your Health Mate Infrared
Sauna are as follows:
1. Your Health Mate cabin is intended to be a self- contained
and freestanding unit. It must not be built into to any structure.
2. There should be a minimum of 5-inches / 12,5 cm clearance
from the wall on all sides of the unit to allow easy access to
the main power cord.
Moisture may cause damages to the interior and exterior of
the sauna. Basement, attic, garage, playroom, spare bedroom,
new extension and garden chalet are just a few of possible
locations for your sauna. Health Mate’s beautiful and simple
cedar wooden exterior will compliment the interior of your
house beautifully.
2) cleaning & maintenance
1. Before using your Health Mate Infrared Sauna for the rst
time, clean the inside of the sauna with a damp cloth. When
cleaning the exterior, use a natural furniture polish.
2. We recommend turning the sauna on for the maximum time
and temperature in order to burn o any factory dust prior to
using the sauna for the rst time.
3. Scratches and stains on the inside of the sauna can be
removed by simply using a ne grade sandpaper over the
damaged area.
4. A customized Health Mate Sauna Cover is available as an
accessory for all models. Use of this protective storage cover
will not only preserve the natural beauty of the sauna, but will
also help in maintaining years of continuous enjoyment.
5. We recommend applying a heavy furniture polish to the
outside of the sauna before putting the (optional) cover on.
Use of a polish will create a barrier for better protection.
If you prefer an outdoor environment, you must use a cover
(see page 26) to protect your sauna. Do not place the sauna on
a surface that easily gets wet.
Place the sauna on a deck to protect it from moisture on the
ground.
a. installation & maintenance
3) assembly guide
Assembly of the sauna requires 2 adults to complete. Please read the instructions thoroughly before and during assembly to
ensure proper installation of the unit. If you encounter any problems or have questions during the assembly, please feel free to
call for Technical Support: (714)739-6600.
step 1: bottom and back panel
1. Turn the bottom panel upside-down and install the feet,
Turn the bottom panel back over and place it in position
where the sauna will be assembled.
2. Push the female end of the main power cord up through
the square hole in the left rear corner of the bottom.
3. Place the back panel onto the bottom panel. The metal
power supply (with all the sockets) should be just above the
oor, close to the opening in the oor where the power cord
comes out. Have someone hold the back panel upright so it
does not fall over.
healthmatesauna.com
5
a. installation & maintenance
step 2: side panels
1. The side panels are labeled “left” and “right”. The left side
panel is the panel on the left if you are standing in front of
the sauna looking at it.
2. Set one side panel onto the bottom
panel, carefully aligning it to the bottom panel and back
panel. Buckle the side panel to the back panel and to the
bottom panel.
3. Set the other side panel onto the bottom panel and buckle it
to the back panel and the bottom panel.
a. installation & maintenance
step 3: bench heater
1. Insert the bench heater panel into the wooden brackets
on the side panels.
2. Plug the cable coming out of the bench heater into any
of the 4 “HEATER” sockets on the power supply
mounted in the back panel.
3. Plug the unmarked
cable coming out of
the bottom panel into
the inlet in the back of
the bench heater.
healthmatesauna.com
7
a. installation & maintenance
step 4: oor cables
1. Plug the female end of the main power cord into the “Inlet” socket on the power supply.
2. There are two additional cables that emerge from the bottom panel at the square hole in the back. The thin cable with the round
metal plug connects to the “DATA” socket on the power supply. The plug and socket are “keyed”, so that there is only one way
to plug this connector in. Rotate the locking ring clockwise until the plug is tightly locked in place.
3. Plug the thick cable marked “HEATER” coming out of the bottom panel into any of the four “HEATER” sockets on the face of the
power supply.
4. Set the bench panel onto the bench heater panel and slide it all the way back until it butts up against the back wall and rests on
the wooden support.
step 5: front panel
a. installation & maintenance
1. When handling the front panel, hold the door so that it
doesn’t accidentally swing open and hit against the ground
and possibly shatter the window. Set the front panel onto
the bottom panel and buckle it to the side panels.
2. Inside the sauna, there are two cables that emerge from
the square opening in the bottom panel at the front. Plug
the connectors from these cables into the “DATA” and
“HEATER” sockets at the bottom of the front panel, being
careful to match the shape of each plug to the shape of the
socket. Examine the shape of the 3-wire heater plug very
carefully, noting that one side of the plug has two slightly
rounded edges. The “HEATER” socket on the front panel
also has one side with two slightly rounded edges.
healthmatesauna.com
3. Place the magnetic wooden cover over the connection.
Note:
One of the two wooden covers features your sauna’s serial number
barcode sticker. Use this wooden cover on these front panel
connections for ease of access to this information for your
registration or after-service needs.
9
step 6: top panel
a. installation & maintenance
1. Set the top panel onto the sauna. Be careful not to pinch
any cables between the top, side, and back panels.
2. There are two cables emerging from the small square
opening at the back of the top panel. Plug the “EXT” cable
and the “LAMP” cable into the labeled open sockets on
the back panel. *It is possible to plug these connections in
upside down. Make sure the shape of the plugs are aligned
with the shape of the sockets.
3. Place the second magnetic wooden cover over the
connections.
4. Attach the door handle to the door by threading the bolt
through the hole in the front of the door. Twist until snug.
Loading...