healing HHT896 HD Digital Terrestrial Receiver Operating Manual
NOTES
2
healing HHT896 HD Digital Terrestrial Receiver Operating Manual
HHT896 FEATURES
Sensitive Tuner – responds to weak signals
Signal Strength and Quality bars colour coded
Receives all ‘freeview’ channels
Stores up to 400 TV and Radio channels
7 Day Electronic Program Guide with 8 day cross over
Closed Caption function embedded
Energy Saving functions included
Saves program parameters at Power Fail
Robust Power Supply built for long life and reliability
Compact Case Design: L 180mm x W 220mm x H 45mm
MPEG4 / H.264 enabled
Outstanding HD & SD ‘Wide Horizon’ Picture Quality
Resolutions: 1920 x 1080i, 1280 x 720p, 720 x 576p and 720 x 576i
Centre Cut option: displays 16:9 on 4:3 screens
Video Outputs: HDMI, Component Y/Pb/Pr and Composite CVBS
All video outputs active simultaneously
Optical Digital Audio: S/PDIF output
USB Record and TimeShift live TV
Flexible Media Player - plays:
ts, .vob, .mp4, .mkv, .divx, .avi, .mp3, .m4a, .aac, .wma and more
3D recording and playback ready
3
healing HHT896 HD Digital Terrestrial Receiver Operating Manual
PREFACE
Thank you for choosing a healing HHT896 High Definition Receiver.
HHT896 includes a fully functional USB recorder with Time Shift and
comprehensive Media Player function, yet is easy to install with all AV
outputs active simultaneously. Built in a small footprint case less than
220mm wide with a removable mains power lead, HHT896 also includes up
to 8 day Electronic Program Guides, Optical Digital Audio for full surround
sound and embedded Closed Caption Subtitles. Healing HHT896 delivers
beautiful High Definition and Standard Definition Television pictures.
SAFETY
1. Allow clear space around the receiver for sufficient ventilation
2. Do not cover the receiver’s ventilation slots or place it near heat source
3. Do not connect AV cables when receiver connected to mains power
4. Do not remove the cover as dangerous voltages may be exposed
5. Do not allow the unit to be exposed to extreme heat, cold or humidity
6. Liquids or sprays must not make contact with internal receiver parts
GENERAL OPERATION OF THE RECEIVER
The everyday operation of your receiver is accessed via user friendly On
Screen Displays and Menus. These Menus can guide you through installation
and channel management with its various functions to enhance your viewing
pleasure. All functions can be accessed through the Remote Control and the
front panel keys provide access to many functions. As new software may
change the function of a receiver, it should not be installed unless specific
upgrade instructions have been given by healing for this receiver, HHT896.
Should you experience any difficulties with the operation of your unit, please
consult the relevant section of this manual or Trouble Shooting.
Alternatively contact your dealer or healing via www.healingdigital.com
4
healing HHT896 HD Digital Terrestrial Receiver Operating Manual
healing HHT896 HD Digital Terrestrial Receiver Operating Manual
FRONT PANEL
a. STANDBY key - Switches between Operational and Standby modes
b. LED display - Shows channel selected, Load status etc.
c. Power LED, green - Indicates power supply active
d. Signal Lock LED, Orange
- No Light = No Signal = No Pictures or Sound.
e. Remote Control sensor
f. CH+ key. Use to select a higher channel number
g. CH- key. Use to select a lower channel number
h. OK. Operation confirmation; Channel List
i. MENU. Press key to enter Main Menu
6
healing HHT896 HD Digital Terrestrial Receiver Operating Manual
REAR PANEL
1. ANTENNA LOOP OUT: passes antenna signal to another receiver,
Antenna Loop Out becomes idle when receiver on STANDBY!
2. ANTENNA IN: connect your antenna, essential for stable pictures.
3. COMPONENT VIDEO: Y,Pb,Pr outputs for high picture quality.
4. AUDIO Right and Left Outputs.
5. VIDEO: Composite CVBS or lesser quality picture output.
6. SPDIF: Digital Audio Toslink output for superior audio quality.
7. HDMI: digital Video and Audio output, combined over a single cable.
8. USB: connect a USB Key or Hard Disk Drive for recording, replay
or in the unlikely event firmware upgrade is necessary.
9. Mains power connection: IEC C7 2 wire connector.
7
healing HHT896 HD Digital Terrestrial Receiver Operating Manual
REMOTE CONTROL UNIT - KEY FUNCTIONS
8
healing HHT896 HD Digital Terrestrial Receiver Operating Manual
REMOTE CONTROL UNIT - KEY FUNCTIONS
•
•
STANDBY. Standby and Operational / On Off modes switch.
MUTE. suspends or re-instates sound.
• RECALL. selects the last tuned channel, when the Menu is off.
• EXIT. leave a Menu or function.
• MENU. enter the Main Menu.
• OK. displays Channel List. In Menu mode confirms
operation.
• ◄ or ►. Audio level, in Menu mode: select or adjust parameter.
• ▲ or ▼. Channel select, in Menu mode: cursor Up or Down.
• 0 – 9. Channel Number select, or in Menu: Number value entry.
• INFO. Information Bar, Present and Next program information.
• EPG. reveals Electronic Program Guide; Menu off.
• AUDIO. audio mode selection from Stereo, Left or Right; Menu off.
• SUBT. Closed Captions display or press again to suspend; Menu off.
• TV/R. TV and Radio reception mode switch; Menu off.
• FAV. reveals Favorite Channel list; Menu off.
• ASPECT. Picture Shape adjust, to match your display or screen.
• Coloured Red, Green and Blue keys: shortcuts and functions, as
listed.
• REC. records a selected program, when USB drive is connected.
• PAUSE. pause or restore when playing a recording from USB drive.
• PLAY. plays a recording selected from USB drive.
• STOP. stops Recording or Playing a file.
• REW Fast Rewind / Skip: 2, 4, 8, 16 or 32 times real time.
• FFW Fast Forward / Skip: 2, 4, 8, 16 or 32 times real time.
• T.SHIFT Freeze, Fast Forward or Rewind live TV via USB drive.
• USB Multimedia menu interface shortcut.
9
healing HHT896 HD Digital Terrestrial Receiver Operating Manual
PREPARING REMOTE CONTROL FOR USE
Fresh batteries help ensure your Remote Control Unit is reliable.
1. Open the battery compartment lid on the back of the RCU.
2. Insert the batteries, negative terminals first. Take care that battery
polarity markings correspond with those of the Remote Control.
3. Close the battery compartment lid, checking that it locks in place.
4. Your RCU should now be ready for use.
REMOTE CONTROL OPERATING DISTANCE & ANGLE
Point the RCU towards your receiver and press
key, with an
uninterrupted view of your receivers’ front panel.
1. Distance: the remote control should work up to
7 meters from the front of your receiver…
2. Angle: and about + or - 30 degrees from directly
facing the receiver.
USEFUL REMOTE CONTROL UNIT TIPS
1. To prolong Remote Control Unit battery life, intervals of continuous
switching should be kept to less than about one minute.
2. Should the receiver stop responding to RCU commands or freeze up,
remove batteries from the RCU and press a few keys and or disconnect
power from the receiver for 10 seconds or so, and restart.
3. Daylight and some electric light can compromise the distance over which
an RCU is effective. You can solve by re-adjusting receiver position and
room lighting as necessary.
10
Loading...
+ 22 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.