healing HHM897 HD Digital Terrestrial TV Receiver - Operating Manual
INTRODUCTION
Thank you for choosing a healing HHM897 high definition digital television receiver.
The HHM897 will enable you to receive and enjoy high definition and standard definition
digital terrestrial TV channels that are available in your location - including freeview
channels
The unit includes a choice of 4 video connections to your television as well as the
convenience of an Inbuilt RF Modulator enabling connection to old televisions that do not
have any video inputs
For a complete listing of our digital television terrestrial receivers as well as our expansive
range of television reception products please view our website: www.healingdigital.com
For general enquiries please email us at sales@laceys.tv or phone 03 9776 0222
4
healing HHM897 HD Digital Terrestrial TV Receiver - Operating Manual
HHM897 FEATURES
Excellent High Definition & Standard Definition „Wide Horizon‟ picture quality
High sensitivity tuner
Receives all 'freeview' Channels
Resolutions 1080i, 720p, 576i and 576p
HDMI, YPbPr Component, S-Video Mini Din, and CVBS Composite outputs active
simultaneously
Inbuilt RF Modulator (UHF21-69) for connection to old televisions that do not have
video inputs
Coaxial Digital Audio output
Optical S/PDIF Digital Audio output
RCA Audio output
Electronic Program Guide EPG) with 8th day cross over
Centre Cut option displays aspect of 16:9 on 4:3 screens
Automatically updates broadcaster program changes
Signal Strength and Quality bars colour coded
Low Energy Consumption – MEPS compliant
Saves program parameters at Power Fail
Closed Caption subtitles
Parental Lock
RS232 connector for software upgrades
Removable mains power lead
5
healing HHM897 HD Digital Terrestrial TV Receiver - Operating Manual
SAFETY INSTRUCTIONS
Operating and Safety instructions should be read prior to connecting and operating the
unit.
Please adhere to all Safety identification marks on the units back panel and safety
instructions listed in this operating manual.
DO NOT INSTALL YOUR RECEIVER:
In a closed or poorly ventilated cabinet
Directly on top or under any other equipment
On an uneven surface
On a surface that might obstruct the ventilation slots.
DO NOT EXPOSE THIS RECEIVER OR ITS ACCESSORIES:
To water or intense moisture
To direct sunlight
To any equipment that generates heat
To intense vibration
To any magnetic objects such as loudspeakers, transformers etc.
Never open the cover: High voltage electrical hazards make it extremely dangerous to
touch the inside of the receiver. Note: Your warranty will be void if the receiver
panel/s has been opened.
If the receiver is not to be used for an extended period, unplug the receiver power
cord from the wall power socket.
When installing the receiver and connecting AV cables etc., initially disconnect the
unit from mains power.
Do not operate the unit if the power lead is damaged.
Protect the power cord from being walked on or pinched.
Clean the Front of the Receiver and its panels only with a dry cloth.
Only use attachments/accessories specified by the manufacturer.
6
healing HHM897 HD Digital Terrestrial TV Receiver - Operating Manual
FRONT PANEL
1. LED display - Shows channel selected and display status: Power LED,
red- indicates power supply active. Remote Control sensor.
2. MENU. Press key to enter Main Menu.
3. PRG- Key. Viewing Mode: To select a lower channel number.
4. PRG+ key. Viewing Mode: To select a higher channel number. Menu
Mode: Move up through Menu items.
5. VOL- Key. Viewing Mode: To decrease volume. Menu Mode: Alter
selected MENU item.
6. VOL+ Key. Viewing Mode: To increase volume. Menu Mode: Alter
selected MENU item.
7. OK. Operation confirmation; Channel List.
8. STANDBY key - Switches between Operational and Standby modes.
7
healing HHM897 HD Digital Terrestrial TV Receiver - Operating Manual
REAR PANEL
1. LOOP INPUT: Combines the antenna signal with LOOP OUT.
2. MODULATOR RF OUTPUT: Output for UHF modulated signal from the HHM897 (for
use with televisions that do not have any video inputs).
3. S/PDIF: Optical digital output for superior audio quality.
4. ANTENNA IN: Input for antenna; mandatory for stable pictures.
5. RS232: DB9 Connector for software upgrades.
6. LOOP OUT: Loop through to pass the antenna signal to another receiver
7. HDMI: Digital Video and Audio output, combined over a single cable.
8. S-VIDEO. A clearer video output than CVBS.
9. COAXIAL. Coaxial digital audio output for superior audio quality.
10. AUDIO R/L: Right and Left stereo audio connectors.
11. VIDEO: Composite CVBS output.
12. COMPONENT VIDEO: YPbPr outputs for high picture quality.
13. POWER: Mains Power input: IEC C7 figure 8.
8
healing HHM897 HD Digital Terrestrial TV Receiver - Operating Manual
REMOTE CONTROL UNIT KEY FUNCTIONS
9
healing HHM897 HD Digital Terrestrial TV Receiver - Operating Manual
FUNCTION
DESCRIPTION
STANDBY
Switch between Standby and operation
TV/R
Switch between Television and Radio programs
MUTE
Mute audio
0-9
Select channels by numbers
PRE-CH
Switch to the previously watched program
TTX
Activated Teletext (where broadcast)
EXIT
Exit the current Menu function
LIST
Displays a list of all channels scanned
FAV
Displays Favourite channel list
MENU
Displays Main Menu
UP/DOWN ARROW
KEYS
Menu Mode: move cursor up/down
Non Menu Mode: program up/down
LEFT/RIGHT ARROW
KEYS
Menu Mode: Move cursor Left or Right
Non Menu Mode: Audio volume up or down
OK
Confirm selected menu item
VOL+
Audio level increase
VOL-
Audio level decrease
CH-
Channel change Down
CH+
Channel change Up
RED KEY
To delete channels within the Edit Channels Menu
GREEN KEY
Freeze picture; press again to release
YELLOW KEY
For inputting Favourites within the Edit Channels Menu
BLUE KEY
Closed Captions on or off and for Channel Sort function within the Edit
Channels Menu
ASPECT
Steps through 3 Aspect Ratio Options (in 4:3 mode only)
EPG
Displays Electronic Program Guide Information
INFO
Displays general information for the current program on the channel
selected
AUDIO
Displays AUDIO CTL Menu Options
REMOTE CONTROL UNIT KEY FUNCTIONS
10
healing HHM897 HD Digital Terrestrial TV Receiver - Operating Manual
REMOTE CONTROL BATTERY CARE
To ensure long life from your Remote Control Unit:
1. Check that the polarity indicators of batteries and the remote control terminals
correspond.
2. Do not mix new and old or different types of batteries together.
3. Never leave old or exhausted batteries in the remote control.
4. If storing your receiver for an extended period, remove the batteries from the RCU.
5. Only rechargeable cells (NiMh etc) should be recharged, and on a purpose built
charger.
6. Do not attempt to disassemble or short circuit the batteries.
7. Do not expose the batteries to heat sources.
8. In the event of electrolyte fluid does leak from a battery inside the remote control,
wipe away with a damp cloth and insert new batteries.
9. Damage to your RCU caused by leaking batteries is not covered by warranty.
11
Loading...
+ 24 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.