HDMI 18Gbps Extender with one-way IR (50M)
VER 1.0
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.
Table of Contents
1. |
Introduction............................................................................................ |
1 |
|
2. |
..................................................................................................Features |
1 |
|
................................................................................3. Package Contents |
2 |
||
4. |
Specifications........................................................................................ |
2 |
|
5. |
Operation Controls and Functions...................................................... |
3 |
|
|
5.1 |
Transmitter Panel............................................................................. |
3 |
|
5.2 |
Receiver Panel................................................................................ |
4 |
|
5.3 |
IR Pin Definition................................................................................ |
5 |
6. |
Application Example............................................................................ |
7 |
1. Introduction
The HDMI 18Gbps Extender can extend high definition video / audio signal and one-way IR, and the distance is up to 164ft / 50 meters between transmitter and receiver over a single Cat5e/6 cable. It supports resolution up to
4K2K@60Hz 4:4:4, 18Gbps and HDCP 2.2. In addition, the extender is equipped with one-way IR pass-through which allows for source control and one HDMI loop output.
The extender includes two units: transmitter unit and receiver unit. The transmitter unit is responsible for capturing HDMI input signal and carries the signal via one cost effective Cat6 cable, and emitting IR control signals. The receiver unit is responsible for receiving the HDMI signal and transmitting IR control signal.
The extender offers the most convenient solution for HDMI extension over a single Cat5e/6 with long distance capability, and is the perfect solution for any application.
2. Features
HDMI 2.0, HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
Supports 18Gbps bandwidth
Supports input and output video resolution up to 4k2k@60Hz 4:4:4, extends distance up to 164ft / 50 meters
Supports one HDMI loop output
Supports one-way IR pass-through
Supports HDR function
Supports PoC (Power over Cable) function, it means that either transmitter or receiver is powered supply by 12V/1A power adapter, the other doesn’t need power supply.)
Supports automatic copy EDID function
Compact design for easy and flexible installation.
1/7