HCS RC339A User Manual

User guide for Remote Control RC3394003/01BR

The remote control has been programmed to control your set-top box and can be
programmed to control your TV.

Installing Batteries

The remote requires 2xAAA batteries. A diagram inside the battery compartment of the
remote indicates proper placement of the batteries. When batteries are properly
installed, the light on the remote blinks each time a key is pressed

Know your Remote

The diagram below describes each key on your remote control. Functions may vary
between different services. Refer to the user guide for your set-top box for descriptions
of specific functions.

Product Introduction

1) This RCU is transmitting IR and RF. There is a simple set up feature for TV/Home

Theatre device.

2) The RCU can be set-up to control a RF or an IR STB (mutually exclusive).

3) The RF platform is BLE, using HOGP as the top layer.

Before the RCU can control the STB, the RCU must pair with the STB first.