HCL ME Tablet PC - MP10
User’s Guide
Notational Conventions
Throughout this manual, the following conventions are used to distinguish elements of text.
Note:
Identifies additional information that requires special attention.
Warning :
Identifies additional information that requires special attention.
Tip :
Identifies additional information that requires special attention.
Caution:
Identifies important information that, if not followed,
may result in loss of data or damage to the Tablet PC.
Overview
Introducing the Tablet PC
Chapter - 1
Knowing the Parts
Chapter - 2
Getting Started
Chapter - 3
Using the Tablet PC
Chapter - 4
1-1
2-1
3-1
4-1
Troubleshooting
Chapter - 5
5-1
TAKING CARE OF YOUR Tablet PC
DO NOT place on uneven or unstable work
surfaces.
DO NOT place or drop objects on the Tablet PC
and DO NOT apply heavy pressure on it.
DO NOT use your Tablet PC under
harsh conditions.
DO NOT expose to direct sunlight.
DO NOT use or store in extreme
temperatures.
To prevent possible overheating of the Tablet PC’s
processor, make sure you don't block the openings
provided for ventilation.
DO NOT subject the Tablet PC to magnetic
fields.
Avoid sudden changes in temperature or humidity
by keeping it away fromA/C and heating vents.
If you are traveling with your Tablet PC,
remember to carry it as hand luggage. Do not
check it in as baggage.
DO NOT slam your Tablet PC
DO NOT expose to dust and/or corrosive
chemicals.
DO NOT tamper with the batteries. Keep them
away from children.
DO NOT expose the Tablet PC to rain or
moisture.
DO NOT place near fire or other sources of heat.
DO NOT spray water or any other cleaning fluids
directly on the display.
User's Guide
Introducing the Tablet PC
Introducing the Tablet PC
Chapter - 1
1-1
Congratulation on the purchase of new HCL Tablet PC!
Transportation Precautions
To prepare the Tablet PC for transport, you should turn it OFF and disconnect all external
peripherals to prevent damage to the connectors. The Tablet PC has vent holes for
expelling the internal heat, transporting the product in a bag in ON condition would block
these vents. This may create permanent damage to the product. Therefore, you should
not transport the Tablet PC in a bag while the power is still ON.
Operating Environment
Since users are likely to maintain the same posture for a long period of time when using the Tablet PC, they
will be exhausted more easily if compared with other users engaged in other general operations. To use
HCL ME Tablet PC comfortably it’s important to find a comfortable posture and to take frequent breaks. Let
your table, case, or dock accessory support HCL ME Tablet PC during use.
Health Management
Take a 2 to 3-minute break every 30 minutes after you have operated the Tablet PC for a long time.
Sedentariness will also cause stress. Do some gentle gymnastics during your break for recreation. When
you have symptoms such as eyestrain, sleepiness, dizziness, stiff in the shoulders, or numbness of the
wrists ,hands or fingers, have a rest right away. In case these symptoms remain the next day, please contact
your doctor as soon as possible.
User's Guide
Introducing the Tablet PC
Use appropriate lighting
Use the same appropriate lighting that is intended for office use when you use the Tablet.
Adjust the angle of the Tablet PC to the position with which you can see the display clearly
You won't see the screen clearly if the display reflects light. In addition, the visibility of the display varies with
the angle due to its feature. Hold the Tablet PC in an angle to ensure its clear visibility.
Cover Your Tablet PC
You can purchase an optional carrying case to protect it from dirt, water, shock, and scratches.
Note :
The Tablet PC surface is easily dulled if not properly cared for. Be careful not to rub or scrap the Tablet PC
surfaces when transporting your Tablet PC.
Know about your Battery
If you intend to use battery power, be sure to fully charge your battery pack(Non Replaceable) before going
on long trips. Remember that the power adapter charges the battery pack as long as it is plugged into the
Tablet PC and an AC power source. Be aware that it takes much longer to charge the battery pack when the
Tablet PC is in use.
Clean the display
A dusty display makes the screen hard to see clearly. Wipe gently with a soft, dry cloth to clean the display
regularly.Handle your Tablet PC with care to maintain its appearance.To clean Tablet PC, unplug all cables
and turn off Tablet PC (You can use windows 7 shutdown option). Then use a soft, slightly damp, lint-free
cloth. Avoid getting moisture in openings. Don’t use window cleaners, household cleaners, aerosol sprays,
solvents, alcohol, ammonia, or abrasives to clean Tablet PC. Simply wipe the Tablet PC screen with a soft,
lint-free cloth to remove oil left by your hands. Rubbing the screen with an abrasive material will scratch your
screen.
1-2
User's Guide
Introducing the Tablet PC
1-3
Important Safety Instructions
Portable Tablet PCs take the most beating from end users. This section gives you detailed information about
how to maintain a safe working environment while using the Tablet PC. You can maintain its condition and
performance by following these guidelines. Please read it carefully to ensure maximum safety.
— Before cleaning the Tablet PC, make sure it is disconnected from any external power supplies (i.e. AC
adapter, car adapter and so on).
— When cleaning, do not use liquid or sprayed detergent for cleaning. Instead, use moisture sheet or a cloth for
cleaning.
— Use your Tablet PC where the socket outlet is nearby and easily accessible.
— Please keep the Tablet PC away from humidity.
— Lay the Tablet PC on a reliable surface when installing. A drop or fall may cause injury.
— The openings on the enclosure are for air convection hence the Tablet PC can be protected from
overheating. Do not cover the openings.
— Be careful of using power supply. The Tablet PC has specific power requirements.
— Use only a power adapter approved for use with this Tablet PC.
— While unplugging the power cord, disconnect it by the plug head, not by its wire.
— Make sure the socket and any extension cords you may use can support the total current load of all the
connected devices.
— Place the power cord in such a way that people can not step on it. Do not place anything over the power
cord.
— All cautions and warnings on the Tablet PC should be noted.
— If the Tablet PC is not in use for a long time, disconnect it from mains to avoid possible damage by transient
over-voltage.
— Never pour any liquid into openings as this may cause fire or electrical shock.
— Never open the body of Tablet PC. For safety reason, the Tablet PC should only be opened by qualified
service personnel.
— Do not leave this Tablet PC in an environment unconditioned. Storage temperature above 60ºC (140ºF)
may damage the Tablet PC.
User's Guide
Introducing the Tablet PC
1-4
Airplane Precautions
Contact your airlines personnel if you want to use the Tablet PC in the airplane. Most airlines will have
restrictions for using electronic devices. Most airlines will allow electronic use only between and not during
takeoffs and landings.
Caution :
There are three main types of airport security devices: X-ray machines (used on items placed on conveyor belts),
magnetic detectors (used on people walking through security checks), and magnetic wands (hand-held devices
used on people or individual items). You can send your Tablet PC and diskettes through airport X-ray machines.
User's Guide
Introducing the Tablet PC
1-5
User's Guide
Knowing the Parts
Knowing the Parts
Chapter - 2
Front & Side view
2-1
Basic details of the Tablet PC
Before you Start
User's Guide
Touch Hot Key
The Touch Hotkey which is there on the top left corner in the front side of the HCL Me Tablet PC , in case of an
abnormal shutdown and subsequent DOS startup or when in BIOS setup (CMOS) screen the touch hotkey
performs the following keyboard-based functions
-Short press = “Down arrow” key ,
-Long press = ”Enter” key
Knowing the Parts
2-2
1
Item
Touch Hot Key
What you can do with it
Using this touch hotkey user can perform “keyboard down
arrow function “ by doing a short press and also a “enter
function” by doing a long press in Non GUI mode or bios
(cmos) setup screens helping for basic navigation without
a keyboard.
Note: However an external USB keyboard is
recommended for any other operation when in Non-GUI
mode.
Before you Start
User's Guide
Status Indicator
This indicator will be on if inbuilt wireless (Wi-Fi), Bluetooth, 3G, GPS or all in ON condition.
Light Sensor
HCL Me Tablet PC has inbuilt Light sensor feature, using this feature the LCD Screen Brightness will
automatically be adjusted for comfortable viewing .
Knowing the Parts
2-3
2
3
Item
Status Indicator
What you can do with it
With this indicator we can know the status of theabove said functions.
However it requires Millennium software to be installed for its proper function.
Item
Light sensor
What you can do with it
HCL Me Tablet PC's inbuilt Light Sensor function will
automatically adjust the screen brightness for comfortable
viewing, When the light sensor 'sees' a bright ambient light
the screen brightness is also increased to compete with
ambient lighting, and also when it 'sees' a dim ambient
light the screen brightness is reduced to avoid too much
brightness level.
Before you Start
User's Guide
Battery Status Indicator
This indicator shows the charge and discharge status
Microphone
HCL Me Tablet PC has inbuilt Microphone feature, using this feature user can do internet voice chatting or do
simple audio recordings with appropriate software
Knowing the Parts
2-4
4
5
Item
Battery
Status Indicator
What you can do with it
If this indicator starts blinking immediately connect the AC power source
to the Tablet PC through adaptor.
Item
Microphone
What you can do with it
Using HCL Me Tablet PC's inbuilt microphone user can do
simple audio recordings, internet voice chatting, voice
narrations etc,.. however if user needs to connect external
microphone & headphone then , an OMTP (Open Mobile
Terminal Platform ) headset needs to be connected to the
Audio jack.
Before you Start
User's Guide
Webcam
HCL Me Tablet PC has inbuilt webcamera function, The built-in camera allows picture taking or video
recording. Can be used with video conferencing and other interactive applications with appropriate software
By using the windows device manager, web cam can be Disabled or
Enabled.
DC-Input
The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through
this jack supplies power to the Tablet PC and charges the internal battery pack. To prevent damage to the
Tablet PC and battery pack, always use the supplied power adapter.
Caution :
The adaptor may become warm to hot when in use. Be sure not to cover the adaptor and keep it away from your body.
Knowing the Parts
2-5
6
7
Item
webcam
What you can do with it
The built-in camera allows picture
taking or video recording. Can be
used with video conferencing and
other interactive applications
Before you Start
User's Guide
Knowing the Parts
2-6
Mini -HDMI port
HCL Me Tablet PC has inbuilt mini-HDMI port, Using this port HCL Me Tablet PC can be connected to large screen display (like large
LCD screen TVs) and can play high definition audio and video.
Caution:
1. For playing the audio along with the video on
LCD TVs when connecting though HDMI port,
please select the HDMI output as default audio
device as as shown. Also make sure you revert
back to Speakers as default device once you
removing the HDMI connection. After connecting
the HDMI cable to TV and the Tablet PC, “Digital
Television ON” option will appear in the display
media control.
2. Mini-HDMI port is a very small intricate port , it
requires proper care while connecting the HDMI
cable for proper orientation, and also do not force it.
Handle it gently as it fits only in one way.
8
Item
Mini HDMI port
What you can do with it
Using a good quality mini-HDMI to HDMI cable the HCL
Me Tablet PC can be connected to a Large screen display
which has inbuilt HDMI port. User needs to use the
Chrontel Display Media Control application as shown, to
connect both the devices.
User's Guide
Knowing the Parts
2-7
USB 2.0 Ports
Caution:
USB based external hard-disk drives or Optical disk drives may require external power adapters to power
them for proper operation. Refer their respective manufacturer specification for details.
HCL Me Tablet PC has inbuilt 2 numbers of USB 2.0 ports, The USB (Universal Serial Bus) ports are
compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointing devices, cameras, hard disk
drives, printers, and scanners connected in a series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB
2.0). USB allows many devices to run simultaneously on a single computer, with some peripherals acting
as additional plug-in sites or hubs. USB supports hot-swapping of devices so that most peripherals can be
connected or disconnected without restarting the computer.However if you want to connect HCL Me Tablet
PC to another computer's USB port for transferring data files on to its inbuilt Solid-State Disk then user
requires to purchase a good quality USB-to-USB data transfer link cable (similar to the one which is shown
below).
9
Item
USB 2.0 ports
What you can do with it
Using these USB (Universal Serial Bus) ports devices such
as keyboards, pointing devices, cameras, hard disk drives,
printers, pen drives and scanners can be connected.
User's Guide
Knowing the Parts
2-8
Audio I/O port
Caution:
Please be careful to check headphone's 3.5mm stereo audio pin follows the
required pin connection as shown above for proper operation.
Note:
If you use external speakers and experience the sound distortion or feedback,
please lower the volume. Some factors is caused by too close locating the microphone and speakers from each
other, moving away the external audio speaker option from the unit may also help.
HCL Me Tablet PC has inbuilt 1 numbers of OMTP Audio Jack, The signal pins follow OMTP standard. Open
Mobile Terminal Platform (OMTP) being a operator-sponsored forum which was set up with the aim of
simplifying the customer experience of mobile data services.
OMTP headset is an earphone with a integrated microphone as shown below. However a normal standard
3.5mm stereo pin based stereo audio non-OMTP headphone/earphone (without integrated Mic) can also be
connected to this port.
10
Item
Audio I/O port
What you can do with it
Using this Audio input-output port, devices such as OMTP
headset, normal headphone or external speaker with
3.5mm stereo pin can be connected.
OMTP HEADSET
Spk-L
Spk-R
MIC
GND
Before you Start
User's Guide
SD Card reader
HCL Me Tablet PC has a built-in SD memory card reader that can conveniently read from and write to SD
flash memory cards used in devices such as digital cameras, MP3 players, mobile phones, and PDAs.
SIM Card reader
For cellular data, HCL Me Tablet PC's 3G uses a SIM card. If you change cellular data carriers, you may have to
remove the SIM card.
Knowing the Parts
2-9
11
12
Item
SD Card reader
What you can do with it
Using this Card reader user can write or
read on to a standard SD card Important
Note :Never remove cards while or
immediately after reading, copying,
formatting or deleting data on the card or
else dataloss may occur. To prevent data
loss, use Windows ” Safely Remove
Hardware" on the taskbar before removing
the flash memory card.
Item
SIM Card reader
What you can do with it
You can use the HCL Me Tablet PC's inbuilt 3G adapter for
connecting to internet by inserting your cellular data
carrier's appropriate SIM card on to this slot.
SD card
Notch
Before you Start
User's Guide
To install and remove the SIM card:
Make sure the SIM Card is in right orientation and push the card on to the SIM card slot until is engaged properly
in the slot. To remove the SIM card, push the card slightly inside so it clicks out , so you can pull it out easily,
Caution:
SIM cards are very small, thin and fragile it requires most careful handling to avoid any damage to card
or the equipment.
Important:
Also it may require to reboot the HCL Me Tablet PC after you insert the SIM card first on its slot for proper
sensing and it's working.
However there might be cellular operator's specific information to be entered in the Mobile Partner
connection manager software for proper connectivity.
Knowing the Parts
2-10
SIM card
Notch
User's Guide
Knowing the Parts
Back side view
2-11
Inbuilt Battery (Non removable)
16
16
Before you Start
User's Guide
Inbuilt Stereo Speakers
The in built in stereo Speaker system allows you to hear audio without additional attachments. The Multimedia
sound system features an integrated digital audio controller that produces sound (results improved with
external stereo headphones or speakers). Audio features are software controlled.
Power Button with LED
The power switch turns the Tablet PC ON and OFF or puts the Tablet PC into sleep or hibernation modes.
Actual
behavior of the power switch can be customized in Windows Control Panel “Power Options.”
Proprietary docking station connector
HCL ME Tablet PC can be connected to a proprietary docking station(Optional) for extended features.
Inbuilt Battery (Non removable)
The Tablet PC has a inbuilt battery pack but this battery pack is the non removable type.
Knowing the Parts
2-12
13
14
15
16
User's Guide
Getting Started
Getting Started
Chapter - 3
Power System
Using AC Power
The Tablet PC power is comprised of two parts, the power adapter
and the battery power system. The power adapter converts AC
power from a wall outlet to the DC power required by the Tablet PC.
Your Tablet PC comes with a universal AC-DC adapter. That means
that you may connect the power cord to any 100V-120V as well as 220V240V outlets without setting switches or using power converters.
Different countries may follow different AC power cord standards. Most
hotels will provide universal outlets to support different power cords as well as voltages. It is always best to
ask an experienced traveler about AC outlet voltages when bringing power adapters to another country.
With the AC power cord connected to the AC-DC adapter, connect the AC power cord to an AC outlet
(preferably with surge-protection) and then connect the DC plug to the Tablet PC. Connecting the AC-DC
adapter to the AC outlet first allows you to test the AC outlet's power and the AC-DC converter itself for
compatibility problems before connecting the DC power to the Tablet PC. The power LED on the adapter
lights up if the power is within accepted ranges.
3-1
User's Guide
Getting Started
Important :
Damage may occur if you use a different adapter to power the Tablet PC or use the Tablet PC's adapter to power other
electrical devices. If there is smoke, burning scent or extreme heat coming from the AC-DC adapter, seek servicing.
You may damage both your battery pack and the Tablet PC with a faulty AC-DC adapter.
Note:
The two pin AC power cord may come with a three-prong plug. The dummy grounding pin on the plug side provides
proper mechanical stability when plugged in the wall socket.
Warning:
The power adapter may become warm to hot when in use, be sure not to cover the adapter and keep it away from your
body.
Do not force the DC pin of the AC-DC adaptor on to the miniature DC socket on the Tablet PC side as it may cause
permanent damage.
Using Battery Power
The Tablet PC is designed to work with a non removable battery pack. The battery pack consists of a set of
battery cells housed together. A fully charged pack will provide few hours of battery life.
3-2
Checking Battery Power
The battery system implements the Smart Battery standard under the Windows
environment, which allows the battery to accurately report the amount of charge
left in the battery. A fully-charged battery pack provides the Tablet PC a few hours
of working power. But the actual figure varies depending on how you use the
power saving features, your general work habits.
To check the remaining battery power, move your finger over the power icon. The
power icon is a " battery" when not using AC power and a "plug" when using AC
power. Touch on the icon for more information and settings.
Note:
If you ignore the low battery warning, eventually the Tablet PC enters suspend mode (Windows default settings)
Warning :
Suspend-to-RAM (STR) does not last long when the battery power is depleted. Suspend-to-Disk (STD) is not the
same as power OFF. STD requires a small amount of power and will fail if no power is available due to complete
battery depletion or no power supply (e.g. removing the power adapter ).
Remaining Battery power may be shown in terms of percentage or hours, and these units may vary
depending upon the operating system versions or hardware configuration.
User's Guide
Getting Started
3-3
User's Guide
Getting Started
Charging the Battery Pack
Before you use your Tablet PC you will have to charge the battery pack. The battery pack begins to charge as
soon as the Tablet PC is connected to external power using the power adapter. Fully charge the battery pack
before using it for the first time. A new battery pack must completely charge before the Tablet PC is
disconnected from external power. It takes a few hours to fully charge the battery when the Tablet PC is
turned OFF and may take twice the time when the Tablet PC is turned on. The battery charge light turns OFF
when the battery pack is charged.
Note:
The battery stops charging if the temperature is too high or the battery voltage is too high.
Power Options
The power switch turns ON and OFF the Tablet PC or putting the Tablet PC into sleep mode. Actual behavior
of the power switch can be customized in Windows Control Panel "Power Options.”
For other options, such as " Sleep, Hibernate or Shut Down" touch the arrowhead icon.
Restarting or Rebooting
After making changes to your operating system, you may be prompted to
restart the system. Some installation processes will provide a dialog box to
allow restart. To restart the system manually, touch Windows Start button
and select “Restart” by touching the arrow as shown in figure.
Powering Off
In Windows 7, power OFF the Tablet PC by touching Windows Start button
and touch the shutdown icon. And for other option touch the arrowhead
icon and select respective options as shown in figure.
3-4
User's Guide
Getting Started
Emergency Shutdown
In case your operating system cannot properly turn OFF or restart, there is a additional way to
shutdown your Tablet PC:
Hold the power button over 4 seconds
Important :
Do not use emergency shutdown while data is being written; doing so can result in loss or destruction of your
data.
3-5
Power Management Options in Windows
1. Windows Power Management provides basic power saving features. In the Windows Power Options
Properties, you may enter time-out values for display and hard disk drive. Windows power manager saves
power by turning off hard drive after 1 minute of inactivity and so on. Also the power management settings
can be found in Windows > Control Panel > Power options. Choose the required power configuration like
Sleep, Hibernate, Shutdown etc.,
2. When Tablet PC is powered from its internal battery, disabling 3G & GPS modules can(when they are not
in use) help conserving battery power.
User's Guide
4-1
USING THE TOUCH SCREEN
Using the Tablet PC
Chapter - 4
Using the Tablet PC
User's Guide
4-2
USING THE TOUCH SCREEN
Using the Tablet PC
User's Guide
Multi-Touch Screen
The controls on the Multi-Touch screen change
dynamically, depending on the task you’re
performing.
Opening Applications
To open an application: Tap its Icon(Single tap or
Double tap depends upon the application)
Scrolling
Drag up or down to scroll. You can also scroll side to
side in some applications.
Dragging your finger to scroll doesn’t choose or
activate anything on the screen.
4-3
Using the Tablet PC
User's Guide
Zooming In or Out
When viewing photos, webpages, email, or maps, you can zoom in and out. Pinch your fingers together or apart.
Onscreen Keyboard
The onscreen keyboard appears automatically anytime you need to type. Use the keyboard to enter text, such as
contact information, email, and web addresses.
Enter text:
1 Tap a text field, such as in a note or new
contact, to bring up the keyboard.
2 Tap keys on the keyboard.
4-4
Using the Tablet PC
User's Guide
Using the writing pad and touch keyboard in Tablet PC PC Input Panel
One of the great features of a Tablet PC PC is the ability to write directly on your Tablet PC. But what happens if
the program that you're using doesn't recognize your handwriting? With Tablet PC PC Input Panel, you can
use the writing pad to convert your handwriting into typed text, or use the touch keyboard to enter characters.
Handwriting recognition
The writing pad and character pad convert handwriting into typed text.The writing pad is the standard
way to enter text with Input Panel. You can write continuously on the writing pad, like writing on a piece
of lined paper. Most people experience better handwriting recognition accuracy with the writing pad.
Note:
Refer windows 7 help topics for more information
4-5
Using the Tablet PC
User's Guide
Wireless LAN Connection (on selected models)
The optional built-in wireless LAN is a compact easy-to-use wireless Ethernet adapter. Implementing the
IEEE 802.11 standard for wireless LAN (WLAN), the optional built-in wireless LAN is capable of fast data
transmission rates using Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division
Multiplexing (OFDM) technologies on 2.4 Ghz or 5 Ghz frequencies (depending of the card specifications).
The optional built-in wireless LAN is backward compatible with the earlier IEEE 802.11 standards allowing
seamless interfacing of wireless LAN standards.
The optional built-in wireless LAN is a client adapter that supports Infrastructure and Ad-hoc modes giving
you flexibility on your existing or future wireless network configurations for distances up to 40 meters between
the client and the access point. But this depends upon the environmental conditions like presence of high
magnetic and electrical field etc.
To provide efficient security to your wireless communication, the optional built-in wireless LAN comes with a
64-bit/128-bit Wired Equivalent Privacy (WEP) encryption and Wi-Fi Protected Access (WPA) features.
By using the Millennium software, enable the wireless LAN
4-6
Using the Tablet PC
If you have included a PCIe card make sure that the Wireless LAN module is on before
installing the driver.
Warning:
Wireless Device Operation Aboard Aircraft: The use of any portable electronic transmission devices aboard
aircraft is usually prohibited. Make sure the module(s) are OFF if you are using the Tablet PC aboard aircraft.
Use millennium control panel software to enable/ disable Wireless LAN module
Connecting to a Wireless Network
Make sure the Wireless LAN module is turned on.
1. Click the taskbar wireless icon , and then click Connect to a network (or right click the icon , and then
click Connect to a network).
2. In the Show list, click to choose Wireless from the drop-down menu.
Wireless LAN
User's Guide
Using the Tablet PC
4-7
User's Guide
Using the Tablet PC
4-8
3. A list of currently available networks will appear.
Note:
Network and Sharing Center: You can also use the Network and Sharing Center control panel in Windows
(Network and Internet) to connect to any available wireless networks.
4. Click a network, and then click Connect.
5. If you do not see a network you want to connect to, click Set up a connection or network (a list of options
will appear allowing manual searching, and creating a new network).
User's Guide
4-9
6. Move the finger over the taskbar icon to see the connection status (see below).
7. To disconnect from the wireless network you can
click the taskbar wireless icon , and then select
Connect or disconnect to access the network
menu, and click Disconnect (or right-click the icon ,
and then click Disconnect from).
Using the Tablet PC
Warning:
Security Enabled Networks: You should try to make sure that any network you are connecting to is a secure
network. Connecting to unsecure networks may allow unauthorized access to your Tablet PC, documents,
websites and files etc.
Bluetooth Module (on selected models)
By using the Millennium software, enable the Bluetooth
Warning:
Wireless Device Operation Aboard Aircraft: The use of any portable electronic transmission devices aboard
aircraft is usually prohibited. Make sure the module(s) are OFF if you are using the Tablet PC aboard aircraft.
Use millennium control panel software to enable/ disable Bluetooth module
Bluetooth Wireless Connection
Tablet PCs with Bluetooth technology eliminates the need for cables for connecting Bluetooth enabled
devices. Examples of Bluetooth- enabled devices may be Tablet PCs, Desktop PCs, mobile phones, and
PDAs.
User's Guide
4-10
Using the Tablet PC
To send a Data/File
1. Power on the Bluetooth by using millennium control panel software
2. Right click on Bluetooth tray icon and select send a file option.
3. Bluetooth file transfer wizard will be opened, browse & select the device the file need to be sent.
4. During file sending the machine will ask for passkey & use passkey to connect the other machine if
required.
5. Then select the sending and give send file.
To Receive a Data/File
1. Power on the Bluetooth by using millennium control panel software.
2. Right click on the Bluetooth tray icon is select Receive a file.
3. Waiting for a connection form another Tablet PC or device dialog box will appear.
4. Then send the file from other machine to this machine.
5. Accept the sent file.
Note:
While receiving file, select receive a file from tray icon, before selecting this you shouldn't send file from other
machine.
User's Guide
4-11
Using the Tablet PC
3G Module (on selected models)
Connecting to the Internet using 3G
HCL ME Tablet PC can connects to the Internet through cellular data network using its internal 3G module.
Make sure 3G module is enabled using millennium control panel software as shown below
Joining a Cellular Data Network
Before you can join a cellular data network on HCL ME Tablet PC using 3G, you need to sign up for a cellular
data plan. And install the SIM card on to the SIM slot as explained earlier in the chapter “knowing the parts”
and you can use the mobile partner software to sign-in on to your cellular network.
The technical information such as APN, Access number,which needs to be fed in to the mobile partner
software(Under options one may create a new profile to enter these data) may vary widely depending upon
your cellular operator. Please refer to your cellular operator for these details.
User's Guide
4-12
Using the Tablet PC
GPS Module (on selected models)
Using GPS(Global Positioning system)
HCL ME Tablet PC has inbuilt GPS receiver. With this user can
avail location services such as Google Maps etc..
Make sure GPS module is enabled using millennium control
panel software as shown.
Use GPS applet software as shown below to start the
GPS service (GPS Applet may be available as a icon on
the desktop or you can start this service by invoking
StartupGPS application from Program Files\GPS Applet
directory
User's Guide
4-13
Using the Tablet PC
User's Guide
4-14
Using the Tablet PC
Note:
If you are using the GPS application, please note the following :
For your safety, do not operate the device while driving.
GPS is operated by the United States government, which is solely responsible for the performance of GPS. Any
change to the GPS system can affect the accuracy of all GPS equipments.
GPS satellite signals cannot pass through solid materials (except glass).
When you are inside a tunnel or building, GPS positioning may not be available.
A minimum of 4 GPS satellite signals are required to determine current GPS position. Signal reception can be
affected by situations such as bad weather or dense overhead obstacles (e.g. trees and tall buildings).
Other wireless devices in the vehicle might interfere with the reception of satellite signals and might result in
unstable reception
GPS receiption is at its best when the equipment is in outdoor - with direct line of sight with the sky.
Assisted GPS, generally abbreviated as A-GPS, is a system which can, under certain conditions, improve the
startup performance, or TTFF (Time To First Fix) of a GPS satellite-based positioning system.However this
technology depends upon Cellular network, please check with your cellular operator.
.
User's Guide
4-15
Using the Tablet PC
Screen rotation (on selected models)
Screen rotation using G-Sensor
HCL ME Tablet PC has inbuilt G-sensor . Screen automatically rotates and
resizes when user tilts the Tablet PC either in Portrait or Landscape mode.
For this function to work, make sure G-sensor module is enabled using
millennium control panel software as shown
Also make sure under windows 7 Operating system this G sensor is in
enabled condition. Goto Control panel > Hardware and sound > Location
and other sensor > enable the G sensor (tick the checkbox and apply)
LANDSCAPE PORTRAIT
Note:
When the orientation change happens, the screen automatically blanks for few seconds before the correct
content appears back on the screen. This is a normal behavior.
User's Guide
4-16
Using the Tablet PC
Automatic Brightness control (on selected models)
Screen Automatic Brightness control
HCL ME Tablet PC has inbuilt Light sensor . With this screen brightness will be automatically controlled with
respect to the ambient lighting
Make sure Automatic brightness control is enabled using millennium control panel software as shown below)
Millennium software helps to set the base brightness level for a comfortable viewing.
Note:
This automatic screen brightness control will be disabled when the Tablet PC runs in AC mode (with AC
adapter plugged in)
5-1
User's Guide
Troubleshooting
Troubleshooting
Chapter - 5
Overview
When you have any problems with your Tablet PC, before consulting your service representative, you may
want to try to solve the problem yourself. This chapter lists some common problems and their possible
solutions. This can’t anticipate every problem, but you should check here before you panic. If you don’t find
the answer in these pages, make sure you have followed the instructions carefully and observed the safety
precautions in the preface. If all else fails, talk to your service representative. You should also make a record
of what happened and what remedies you tried.
Of course, if something goes wrong, it will happen at the most inconvenient time possible, so you should
preview this section just in case. If, after you’ve tried everything, and the system still won’t cooperate, try
turning it off for a few minutes and then reboot. You will lose any unsaved data, but it may start working again.
Else approach for your service representative.
Basic Hints and Tips
Many of the following may seem obvious but they are often the solution to a problem when your Tablet PC
appears not to be working.
— Power - Is the Tablet PC actually plugged into a working electrical outlet? If plugged into a power strip, make
sure it is actually working. Check the LED Power & Communication Indicators to see the Tablet PC’s power
status.
— Connections - Check all the cables to make sure that there are no loose connections , adapter anywhere.
5-2
User's Guide
Troubleshooting
— Power Savings - Make sure that the system is not in Hibernate or Sleep mode use power button to wake-up
the system.
— Brightness - Check the brightness of the screen by adjusting screen brightness using Millennium control
panel software or Windows 7 inbuilt screen brightness control settings to adjust the brightness.
— Boot Drive - Make sure there are no disc and/or USB storage devices in any connected drive (this is a
common cause of the message “Invalid system disk - Replace the disk, and then press any key”/ “Remove
disks or other media. Press any key to restart”).
— Check to see if the problem persists when all the external devices are removed.
— Use a external USB Keyboard to check if your Tablet PC is operational by pressing and holding any key.
— Be sure you have not performed an incorrect setting on the hardware devices in the BIOS Setup utility. A
faulty setting may cause the system to misbehave. If you are not sure of the changes you made, try to
restore all the settings to factory defaults.
— Be sure all the device drivers are installed properly. For example, without the audio driver properly installed,
the speakers and microphone will not work.
— If external devices such as USB camera, scanner, printer do not function correctly when connected to the
system, it is usually the device's own problem. Consult the device's manufacturer first.
— Some software programs, which have not gone through rigorous coding and testing, may cause problems
during your routine use. Consult the software vendor for problem solving.
5-3
User's Guide
Troubleshooting
Backup and General Maintenance
— Always backup your important data, and keep copies of your OS and programs safe, but close to hand. Don’t
forget to note the serial numbers if you are storing them out of their original cases, e.g. in a CD/DVD wallet.
— Run maintenance programs on your hard disk and OS as often as you can. You may schedule these
programs to run at times when you are not using your Tablet PC. You can use those that are provided free
with your OS, or buy the more powerful dedicated programs to do so.
— Write down your passwords and keep them safe (away from your Tablet PC). This is especially important if
you choose to use a Supervisor password for the BIOS password.
— Keep copies of vital settings files such as network, mail settings etc.(even if just brief notes).
Viruses
— Install an Anti-Virus program and keep the definitions file (the file which tells your program which viruses to
look for) up to date. New Tablet PC viruses are discovered daily, and some of them may seriously harm your
Tablet PC and cause you to lose data. Anti-Virus programs are commercially available and the definitions file
updates are usually downloadable directly from the internet. Be aware when e-mail, downloading file from
internet, ensure those are virus free.
5-4
User's Guide
Troubleshooting
Upgrading and Adding New Hardware/Software
— Do not be tempted to make changes to your Windows Registry unless you are very sure of what you are
doing, otherwise you will risk severely damaging your system.
— Don’t open your Tablet PC or undertake any repair or upgrade work if you are not comfortable with what you
are doing. This will void your warranty.
— Read the documentation. We can assume, since you are reading this that you are looking at the Tablet PC’s
manual, but what about any new peripheral devices you have just purchased? Many problems are caused
by the installation of new hardware and/or software. Always refer to the documentation of any new hardware
and/or software, and pay particular attention to files entitled “READ ME” or “READ ME FIRST”.
— When installing a new device always make sure the device is powered on, and in many cases you will need
to restart the Tablet PC. Always check that all the cables are correctly connected.
— Make sure you have installed the drivers for any new hardware you have installed.
— Thoroughly check any recent changes you made to your system as these changes may affect one or more
system components, or software programs. If possible, go back and undo the change you just made and see
if the problem still occurs.
— Don’t over complicate things. The less you have to deal with then the easier the source of the problem may
be found; Example - if your Tablet PC has many devices plugged into its ports, and a number of programs
running, then it will be difficult to determine the cause of a problem. Try disconnecting all of the devices and
restarting the Tablet PC with all the peripheral devices unplugged. A process of elimination (adding and
removing devices and restarting where necessary) will often find the source of a problem, although this may
be time consuming.
5-5
User's Guide
Troubleshooting
Low Battery. Plug in the AC power source. If the Tablet PC doesn’t start up
immediately, turn it off then on again.
The system is using too much power. If your OS has a Power Options
scheme check its settings. You may also be using an Card/USB
device/external device that is drawing a lot of power.
The battery has not been fully discharged before being recharged. Make
sure the battery is fully discharged and recharge it completely before
reusing. Refer battery tips which care with the machine.
Power Options have been disabled. Go to the Control Panel in Windows
and re-enable the options.
Problem
Possible Cause - Solution
The battery LED power
indicator, is blinking .
You are losing battery
power too quickly.
Actual battery operating
time is shorter than
expected.
Make sure the Tablet PC is properly ventilated and the Vent/Fan intakes are
not blocked. If this doesn’t cool it down, put the system into Hibernate mode
or turn it off for an hour. Make sure the Tablet PC isn’t sitting on a thermal
surface . Make sure you’re using the correct adapter.
Make sure that your Tablet PC is completely powered off before putting it
into a travel bag (or any such container). Putting a Tablet PC which is
powered on in a travel bag may cause the Vent/Fan intakes to be blocked.
The Tablet PC feels
too hot.
5-6
User's Guide
Troubleshooting
If you forget the password, you may have to discharge the battery of the
CMOS. Contact your service representative for help.
Warning:
If you choose to set a boot password, (If supported) NEVER forget your password. The consequences of this
could be serious.
You forget the boot
password.
The volume might be set too low. Check the volume control in the Volume
Control Panel in the Windows taskbar.
The sound cannot be heard
or the volume is very low.
The system never goes into
a power saving mode.
Power Options features are not enabled. Go to the Windows Power Options
menu and enable the features you prefer. Make sure you have enabled
Hibernate mode from the control panel.
The modules are off. Check the common function LED indicator is on or off.
If the LED indicator is off, then check using millennium control panel
software WLAN is enabled .
The Wireless LAN modules
cannot be detected.
Loading...