HB Optoelectronic HBP200 User Manual

HBP200

DLP Pico Projector

User Guide

Contents

Chapter 1 Important Safety Information 1 Chapter 2 Getting Started 4

Product Overview 4 Package Overview 5 Remote Control 6 Device Connectivity 7 Power on/off the Projector 9 Adjust Focus 12 Using the Tripod 12 Function Keys 13

Chapter 3 Playing Your Files 14

Using AV/HDMI/VGA Device 14 Using USB Drive/Micro SD Card 16 Watching Videos 18 Playing Music 21 Viewing Photos 24 Browsing Text Files 27

Chapter 4 Adjusting Setting 29

Picture 30 Sound 34 Option 38

HBP200 DLP Pico Projector User Guide

Chapter 1 Important Safety Information

FCC Notice

1. Caution: Modification not expressly approved by the company could void the user’s authority to operate the equipment.

2. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the radio or television off and on, the user is encouraged to try to correct interference by one or more of the following measures:

A. . Reorient or relocate the receiving antenna. B. . Increase the separation between the equipment and receiver. C. . Connect the equipment into an outlet on another circuit. D. . Consult the dealer or an experienced radio/TV technician for help.

Important Safety Information

1. To ensure reliable operation of the projector and prevent overheating, make sure the projector is properly ventilated during use

1

HBP200 DLP Pico Projector User Guide

and that all ventilation openings on the projector remain unobstructed and kept free from obstacles. For example, do not place the projector on a sofa, carpet or bed during operation and do not use the projector is an enclosed place, such as a book cabinet or steel cabinet.

2. Do not expose the projector to moisture or rain. (i.e. using the projector near a bathroom sink, kitchen, laundry room, damp corners of a wall or a swimming pool can be very dangerous)

3. Do not operate the projector near sources of heat or equipment that will generate high temperatures. (i.e. heater, cooler, furnace and so forth)

4. Before cleaning the projector, be sure to unplug the power cord from the wall outlet. Do not spray cleaning solvent directly onto the projector, but apply the cleaning solvent on a piece of soft fabric to clean the projector.

5. Be sure to read all instructions printed on the labels on the projectors.

6. In order to prevent short circuit caused by lightning, be sure to turn off the projector’s power and unplug the power supply when it will not be attended or used for a long time.

7. Do not attempt to force any objects into the openings of the projector case. It will cause a fire hazard or electric shock caused by direct contact with the high voltage. Do not connect the projector with any cables or connectors that are not compatible with its connectors. Do not spill any liquid onto the projector.

8. If the projector emits strange noise or odors, usually caused by inappropriate operation, turn off the projector immediately and

2

HBP200 DLP Pico Projector User Guide

seek assistance from your dealer. Do not attempt to open the case or repair the projector by yourself as you may get an electrical shock.

9. Should any of the following situations occur, unplug the power supply immediately and contact your dealer to solve the problem:

10. The power cord is damaged or frayed.

11. Liquid has been spilled onto the projector and it seeps through the projector case or when the projector has been exposed to rain or water.

A. The projector has been dropped from a high location.

B. Display from the projector shows a noticeable difference.

C. The product fails to function normally when you operate it as instructed in this user’s guide.

12. To ensure the projector functions normally, do not attempt to use the power adapter or battery other than the power adapter and battery in the accessory package. We will not be responsible for the damages caused by using the power supply from other manufacturers.

3

HBP200 DLP Pico Projector User Guide

① Power SW ② Focus Ring ③ AV ④ Earphone ⑤ IR Sensor ⑥ Micro SD ⑦ VGA ⑧ HDMI ⑨ USB ⑩ DC in

①

②

③

④

⑤

⑥

⑦ ⑧ ⑨

⑩

Chapter 2 Getting Started

Product Overview

4

HBP200 DLP Pico Projector User Guide







  





Package Overview

The following items are the standard accessories of the projector. Please check if you have received all items before you start using the projector. If there is any item missing, please contact your dealer immediately.

 Power Adapter with AC plug

 Hybrid VGA cable

 Remote control

 Quick Start Guide

 Battery Pack (Optional Accessory)

 Warranty Card

 Tripod

 Android 4.0 Mini PC with 2.4G

Wireless Mouse (Optional Accessory)

5

HBP200 DLP Pico Projector User Guide

IR Sensor

Source

Right

Enter

Mute

Stop

Left

Fast Backward

Menu

Volume Down

Volume Up

Pause

Fast Forward

Exit

Up

Power On/Off

Remote Control

1. Remove the plastic tab from the battery compartment before using the remote control.

2. Point the remote control toward the IR sensor at the back of the projector to make the remote control function normally.

3. Remote Control Key Function

6

HBP200 DLP Pico Projector User Guide

Device Connectivity

The projector can be connected to various multimedia devices through the connectors on the back and right side of the projector.

Connect 1. DVD Player and Other AV Interface Multimedia Device

2. Earphone

3. Micro SD Card

1. DVD player 2. 3.5ψ stereo Earphone 3. Mirco SD Card*

Note: Insert your Micro SD card while the side with flash contacts is faced upward.

7

HBP200 DLP Pico Projector User Guide

Connect 4. Personal Computer

5. Blu-ray Player and Other HDMI Interface Multimedia Device

6. USB Drive

4. Personal Computer 5. Blu-ray Player 6. USB Drive

8

HBP200 DLP Pico Projector User Guide

Power on/off the Projector

To Power on the Projector

1. Connect the power adapter to the DC connector on the projector and connect the power cord to the wall socket. Power Adapter

2. Press the power key on the projector and all the LED indicators will turn blue.

9

HBP200 DLP Pico Projector User Guide

Description

Normal Usage

 Blinking— The LED blinking will last for about 5-6 seconds while the

projector has been switched on.

 On—The projector is ready to use after boot up sequences are completed.  Off—The projector has been switched off.

Abnormal Status

 Blinking—Circuit Protection: The LED indicator will be blinking when the temperature

of the projector is too high. You will see a warning message as below. The indicator will be blinking for 10 seconds and then the projector will be off.

Circuit Protection Warning Message

Note: LED Indicator will tell you the operating status of the projector.

10

HBP200 DLP Pico Projector User Guide

Main Menu

3. A screen with a logo will be displayed and then the system will display the main menu as below.

To Power off the Projector

Press the power key on the projector and all the LED indicators will turn off. Then you

can pull off the power cord from the wall socket.

Note: When the projector is connected to devices with a VGA/HDMI/AV interface, the projector will automatically turn off in 12 minutes if no signal is sensed coming from the devices.

11