H-B Instrument B60205-0500, B60205-0800 User Manual
Page 1/12
Safety Data Sheet
according to 1907/2006/EC (REACH), 1272/2008/EC (CLP), and
GHS
Printing date 15.04.2014 Revision: 15.04.2014
1 Identification of the substance/mixture and of the company/undertaking
·
1.1 Product identifier
·
Trade name: DURAC Plus Liquid Fill for Thermometers
·
1.2 Relevant identified uses of the substance or mixture and uses advised against
No further relevant information available.
·
Application of the substance / the mixture
·
1.3 Details of the supplier of the Safety Data Sheet
·
Manufacturer/Supplier:
H-B Instrument – A Division of Bel-Art Products
102 West Seventh Avenue
Trappe, PA 19426 USA
Phone: (610) 489-5500
·
1.4 Emergency telephone number:
ChemTel Inc.
(800)255-3924, +1 (813)248-0585
Product Component
2 Hazards identification
·
2.1 Classification of the substance or mixture
·
Classification according to Regulation (EC) No 1272/2008
flame
Flam. Liq. 2 H225 Highly flammable liquid and vapour.
Eye Irrit. 2 H319 Causes serious eye irritation.
STOT SE 3 H336 May cause drowsiness or dizziness.
·
Classification according to Directive 67/548/EEC or Directive 1999/45/EC
Xi; Irritant
R36: Irritating to eyes.
F; Highly flammable
R11: Highly flammable.
R66-67: Repeated exposure may cause skin dryness or cracking. Vapours may cause drowsiness and
dizziness.
·
Information concerning particular hazards for human and environment:
The product has to be labelled due to the calculation procedure of the "General Classification guideline for
preparations of the EU" in the latest valid version.
At long or repeated contact with skin it may cause dermatitis due to the degreasing effect of the solvent.
·
Classification system:
The classification is according to the latest editions of the EU-lists, and extended by company and
literature data.
(Contd. on page 2)
38.0.33
Page 2/12
Safety Data Sheet
according to 1907/2006/EC (REACH), 1272/2008/EC (CLP), and
GHS
Printing date 15.04.2014 Revision: 15.04.2014
Trade name: DURAC Plus Liquid Fill for Thermometers
(Contd. of page 1)
The classification is in accordance with the latest editions of international substances lists, and is
supplemented by information from technical literature and by information provided by the company.
·
2.2 Label elements
·
Labelling according to Regulation (EC) No 1272/2008
The product is classified and labelled according to the CLP regulation.
·
Hazard pictograms
GHS02 GHS07
·
Signal word
·
Hazard-determining components of labelling:
acetone
·
Hazard statements
H225 Highly flammable liquid and vapour.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
·
Precautionary statements
P210 Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
P280 Wear protective gloves / eye protection.
P261 Avoid breathing mist/vapours/spray.
P303+P361+P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse
P370+P378 In case of fire: Use for extinction: CO2, powder or water spray.
P403+P235 Store in a well-ventilated place. Keep cool.
·
Additional information:
EUH066 Repeated exposure may cause skin dryness or cracking.
·
Hazard description:
·
WHMIS-symbols:
B2 - Flammable liquid
D2B - Toxic material causing other toxic effects
Danger
skin with water/shower.
·
NFPA ratings (scale 0 - 4)
Health = 2
230
·
HMIS-ratings (scale 0 - 4)
HEALTH
FIRE
REACTIVITY
38.0.33
Fire = 3
Reactivity = 0
*2
Health = *2
3
Fire = 3
0
Reactivity = 0
(Contd. on page 3)
Page 3/12
Safety Data Sheet
according to 1907/2006/EC (REACH), 1272/2008/EC (CLP), and
GHS
Printing date 15.04.2014 Revision: 15.04.2014
Trade name: DURAC Plus Liquid Fill for Thermometers
(Contd. of page 2)
·
HMIS Long Term Health Hazard Substances
None of the ingredients is listed.
·
2.3 Other hazards
·
Results of PBT and vPvB assessment
·
PBT:
Not applicable.
·
vPvB:
3 Composition/information on ingredients
·
3.2 Mixtures
·
Description:
·
Dangerous components:
CAS: 67-64-1
EINECS: 200-662-2
Index number: 606-001-00-8
·
Additional information:
Not applicable.
Mixture of substances listed below with nonhazardous additions.
acetone
Xi R36; F R11
R66-67
Flam. Liq. 2, H225
Eye Irrit. 2, H319; STOT SE 3, H336
For the wording of the listed risk phrases refer to section 16.
50-100%
4 First aid measures
·
4.1 Description of first aid measures
·
General information:
Immediately remove any clothing soiled by the product.
Take affected persons out into the fresh air.
·
After inhalation:
·
After skin contact:
Immediately wash with water and soap and rinse thoroughly.
If skin irritation continues, consult a doctor.
·
After eye contact:
Remove contact lenses if worn.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
·
After swallowing:
Rinse out mouth and then drink plenty of water.
Do not induce vomiting; call for medical help immediately.
·
4.2 Most important symptoms and effects, both acute and delayed
Irritant to eyes.
Slight irritant effect on skin and mucous membranes.
Dizziness
Nausea
Gastric or intestinal disorders when ingested.
Coughing
Acidosis
Disorientation
Unconsciousness
Supply fresh air; consult doctor in case of complaints.
(Contd. on page 4)
38.0.33
Page 4/12
Safety Data Sheet
according to 1907/2006/EC (REACH), 1272/2008/EC (CLP), and
GHS
Printing date 15.04.2014 Revision: 15.04.2014
Trade name: DURAC Plus Liquid Fill for Thermometers
(Contd. of page 3)
·
Hazards
·
4.3 Indication of any immediate medical attention and special treatment needed
If necessary oxygen respiration treatment.
Medical supervision for at least 48 hours.
5 Firefighting measures
·
5.1 Extinguishing media
·
Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
·
For safety reasons unsuitable extinguishing agents:
·
5.2 Special hazards arising from the substance or mixture
Formation of toxic gases is possible during heating or in case of fire.
·
5.3 Advice for firefighters
·
Protective equipment:
Wear self-contained respiratory protective device.
Wear fully protective suit.
·
Additional information
Eliminate all ignition sources if safe to do so.
Cool endangered receptacles with water spray.
Use large quantities of foam as it is partially destroyed by the product.
No further relevant information available.
None.
6 Accidental release measures
·
6.1 Personal precautions, protective equipment and emergency procedures
Use respiratory protective device against the effects of fumes/dust/aerosol.
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Keep away from ignition sources.
Protect from heat.
·
6.2 Environmental precautions:
·
6.3 Methods and material for containment and cleaning up:
Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Pick up mechanically.
Send for recovery or disposal in suitable receptacles.
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
·
6.4 Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
7 Handling and storage
·
7.1 Precautions for safe handling
Prevent formation of aerosols.
(Contd. on page 5)
38.0.33
Loading...