Page 1
Operating instructions
Measurement Range:
Operating Range:
Storage Range:
Resolution:
Response Time (90%):
1sec
Emissivity Range:
0.95 fixed
Auto switching
-
off: 15sec
Operating instructions
Measurement Range:
Operating Range:
Storage Rang
e:
Resolution:
Response Time (90%):
1sec
Emissivity Range:
0.95 fixed
Auto switching
-
off: 15sec.
Operating instructions
Measurement Range:
o
Operating Range:
Storage Range:
Resolution:
Response Time (90%):
1sec
Emissivity Range:
0.95 fixed
Auto switching
-
off: 15sec.
Operating
Measurement Range:
o
Operating Range:
o
o
Storage Range:
Resolution:
Response Time (90%):
1sec
Emissivity Range:
0.95 fixed
Auto switching
-
off: 15sec.
This is a non-contact infrared thermometer used to measure surface temperatures of objects.
USE:
Simply aim the thermometer at the target
with the probe and press the meas. Button
to display the surface temperature.
The distance to target diameter ratio
(Distance:Spot) is 1:1 therefore the device
should be positioned as close to the target
as possible. For example: at one inch, you
will measure a 1 inch diameter area, from
2 inches = a 2 inch area…. and so forth.
o
C/ oF:
The temperature unit can be changed
from oC to oF by pressing the pick hole
under the back cover with a pape rclip.
Battery Replacement:
When the above icon flash in the LCD, that indicates the battery is low and should be replaced.
Confirm the unit is power OFF, loosen the cover in an anti-clockwi se direction and replace the
LR44 1.5v cell battery*2pcs.
** Dispose of used battery prope rly and keep away from children.
Accuracy (Tamb=23±3 oC):
RoHS Complaint
1 year Warranty
-33~220 oC (-27.4~430 oF)
0~50 oC (32~122 oF)
-20~65 oC (-4~149 oF)
+/-2% of reading or 2.5 oC (4.5 oF) whichever is greater
o
0.1
C /0.1 oF
This is a non-contact infrared thermometer
used to measure surface tempe ratures of
objects.
USE:
Simply aim the thermometer at the target
with the probe and press the meas. Button
to display the surface temperature.
The distance to target diameter ratio
(Distance : Spot) is 1:1 therefore the device
should be positioned as close to the target
as possible. For example: at one inch, you
will measure a 1 inch diameter area, from 2
inches = a 2 inch area and so forth.
o
C/ oF:
The temperature unit can be changed from
o
C to oF by pressing the pick hole unde r the back cover with a paperclip.
Battery Replacement:
When the above icon flash in the LCD, that indicates the battery is low and should be replaced.
Confirm the unit is power OFF, loosen the cover in an anti-clockwi se direction and replace the
LR44 1.5v cell battery*2pcs.
** Dispose of used battery prope rly and keep away from children.
Accuracy (Tamb=23±3 oC):
RoHS Complaint
1 year Warranty
-33~220 oC (-27.4~430 oF)
0~50 oC (32~122 oF)
-20~65 oC (-4~149 oF)
+/-2% of reading or 2.5 oC (4.5 oF) whichever is greater
o
0.1
C /0.1 oF
This is a non-contact infrared thermometer used to measure surface temperatures of objects.
USE:
Simply aim the thermometer at the target with
the probe and press the meas. Button to
display the surface temperature.
The distance to target diameter ratio
(Distance:Spot) is 1:1 therefore the device
should be positioned as close to the target as
possible. . For example: at one inch, you will
measure a 1 inch diameter area, from 2
inches = a 2 inch area…. and so forth
o
C/ oF:
The temperature unit can be changed from oC
to oF by pressing the pick hole under the back
cover with a paperclip.
Battery Replacement:
When the above icon flash in the LCD, that indicates the battery is low and should be replaced.
Confirm the unit is power OFF, loosen the cover in an anti-clockwi se direction and replace the
LR44 1.5v cell battery*2pcs.
** Dispose of used battery prope rly and keep away from children.
Accuracy (Tamb=23±3 oC):
-33~220 oC (-27.4~430
0~50 oC (32~122 oF)
-20~65 oC (-4~149 oF)
+/-2% of reading or 2.5 oC (4.5 oF) whichever is greater
o
0.1
C /0.1 oF
F)
instructions
This is a non-contact infrared thermometer
used to measure surface tempe ratures of
objects.
USE:
Simply aim the thermometer at the target
with the probe and press the meas. Button
to display the surface temperature.
The distance to target diameter ratio
(Distance:Spot) is 1:1 therefore the device
should be positioned as close to the target
as possible. . For example: at one inch, you will measure a 1 inch diameter area, from 2 inches = a
2 inch area…. and so forth
o
C/ oF:
The temperature unit can be changed from oC to oF by pressing the pick hole under the back cover
with a paperclip.
Battery Replacement:
When the above icon flash in the LCD, that indicates the battery is low and should be replaced.
Confirm the unit is power OFF, loosen the cover in an anti-clockwi se direction and replace the
LR44 1.5v cell battery*2pcs.
** Dispose of used battery prope rly and keep away from children.
Accuracy (Tamb=23±3 oC):
-33~220 oC (-27.4~430
0~50
C (32~122
-20~65 oC (-4~149 oF)
+/-2% of reading or 2.5 oC (4.5 oF) whichever is greater
o
0.1
C /0.1 oF
F)
F)
RoHS Complaint
1 year Warranty
RoHS Complaint
1 year Warranty
Loading...