H&b PL-4250V, PL-5000V, PL-5500V, PL-6300 User Manual

PLASMA TV

PL-4250V / PL-5000V
PL-5500V / PL-6300

1

OWNER'S MANUAL

PAL

Contents

Foreword

■ Caution 3

■ Important Safety Instructions 4

■ Precaution 5

Overviewing your the Monitor

■ Viewing the Control Panel 10

■ Viewing the Connecting Pan el 11

■ Viewing the Remote Control

- Button Description 13

- PIP(Picture In Picture) 15

- Loading the B a tt eri es

16

Installation

■ Table Stand Installation 17

■ Speaker Installation 19

Connection the Cable/Devices

■ Connection the TV Cable 20

■ Connection the VCR 21

■ Connection the DVD 22

■ Connection the Set Top Box 23

■ Connection the PC (D-Sub & DVI) 24

■ Displayable Monitor Specification 25

Setting the Channel

■ Basic Operation 26

■ OSD Menu Structure 27

■ Storing Channels Automatically 28

■ Storing Channels Manually 30

■ Fine Tuning the Channel Reception 30

■ Editing the Channels 31

■ Digest Function 32

■ Teletext 33

Setting the Picturel

■ Changing the Picture Mode 34

-Adjusting the User Mode 34

■ Changing the Color Temperature 36

2

OWNER'S MANUAL

Contents

Setting the Picture

■ Changing Color Enhancer 36

■ Video NR(Noise Reduction) 37

■ Changing the Screen Form 37

■ Selecting the Black Enhancer 38

■ Position 39

Auto Adjust 39

Setting the Sound

■ Adjusting the Sound Balance 41

■ Changing the Sound Mode 41

■ User Adjust 42

■ Spatial Effect 42

■ AVC (Auto Volume Control) 42

■ MTS (Multichannel Television Sound) 43

Setting the Others

■ Adjusting the Transparency of the OSD Window 44

■ PIP (Picture In Picture) 44

- Changing the Size in PIP 45

- Choosing the Source in PIP 45

- Picture Swap in PIP (Picture in Picture) 46

- Position in PIP 46

■ Advanced

- Set ID in Advanced 47

- Blue Back in Advanced 47

- Language in Advanced 48

- Front Key Lock in Advance 48

- Burn Protection in Advance 48

- Burn Clear in Advance

48

Setting the Time

■ Setting the Current Time 49

■ Setting the On Time 49

■ Setting the Off Time 51

■ Setting the Sleep Timer 51

58

Troubleshooting

Spec.

Warranty Card

3

59

66

OWNER'S MANUAL

Caution

CAUTION

- TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD.

- DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

- SHOCK HAZARD DO NOT OPEN.

CAUTION

These servicing instructions are for use by qualified service
personnel only. To reduce the risk of electric shock, do not
perform any servicing other than that contained in the operating
instructions unless you are qualified to do so.

CAUTION

The stand intended for use only with This TV. Use with other
apparatus is capable of resulting in Instability causing possible
injury .

WARNING

- Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be
placed on the apparatus.

- This is Class B product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.

- To reduce the risk of fire and electric shock, do not expose this product to rain or moisture.

FCC NOTICE

This device has been tested and found to comply with the limits for a Class B device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in home environment
as well as in a commercial, industrial or business environment. This equipment can generate, use and radiate radio
frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to
radio communications. However, there is no guarantee t hat interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures :

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Changes or modification not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.

Connecting of peripherals requires the use of grounded shielded signal cables.

Always be careful when using your Monitor. To reduce the risk of fire, electrical shock, and other
injuries, keep these safety precautions in mind when installing, using, and maintaining your machine.

Read all safety and
operating instructions before
operating your Monitor.

Keep the safety and operating
instructions for future
reference.

4

Heed all warnings on the
Monitor and in the operating
instructions.

OWNER'S MANUAL

Precaution

Always be careful when using your TV. To reduce the risk of fire, electrical shock, and other injuries,
keep these safety precautions in mind when installing, using, and maintaining your machine.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus n ear water.

6) Clean only with a dry cloth.

7) Do not block any of the ventilatio n openings. Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the pol arized or grounding type plug. A polarized plug h as two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.

11) Only use the attachments/accessories specified by the manufacturer.

12) Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use ca ution when movi ng the cart/ app ar atus c ombin ation to avoi d injury
from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spill ed or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.

15) When installing the PDP TV, do not block the a ppliance coupler with any structure.
User can easily have access to the coupler to disconnect it from AC main power.

5

OWNER'S MANUAL

Precaution

In case of the following cases, unplug the unit from the wall outlet
and contact qualified service center.

* When power supply code or plug is damaged
* If liquid has been spilled on the unit or if alien objects have fallen into the unit.
* If the monitor has been exposed to rain or water.
* If the monitor does not operate normally by following the operating instructions.
* If the monitor dropped or the cabinet has been damaged
* When the monitor exhibits a distinct change in performance.

Setting

Avoid overhead power lines. An outside
antenna system should not be placed in the
vicinity of overhead power lines or other

Do not use the Monitor where

Follow all operating and use
instructions.

Ground outdoor antennas. If an outside antenna or cable system is connected to the Monitor, be sure the
antenna or cable system is grounded so as to provide some protection against voltage surges and built-up
static charges. Section 810 of the National Electrical Code, ANSI/NFPA No.70-1984, provides information
about proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.

contact with or immersion in
water is a possibility, such as
near bath tubs, sinks, washing
machines, swimming pools, etc.

electric light or power circuits or where it can
fall into such power lines or circuits. When
installing an outside antenna system, be
extremely careful to keep from touching the
power lines or circuits. Contact with such
lines can be fatal.

CAUTION

Bend antenna cable between
inside and outside building to
prevent rain from flowing in.

-This may cause water damaged
inside the Monitor and could give
an electric shock.

Do not place an outside antenna
in the vicinity of overhead power
lines, other electric light or power
circuits.

- This may cause an electric
shock.

6

There should be enough distance
between an outside antenna and
power lines to keep the former
from touching the latter even when
the antenna falls.

- This may cause an electric shock.

OWNER'S MANUAL

Precaution

Setting

When installing the Monitor on a table,
be careful not to place the edge of its
stand.

- This may cause the Monitor to fall,
causing serious injury to a child or
adult, and serious damage to the
Monitor.

WARNING

Provide ventilation for the Monitor. The unit
is designed with slots in the cabinet for
ventilation to protect it from overheating.
Do not block these openings with any
object, and do not place the Monitor on a
bed, sofa, rug or other similar surface. Do
not place it near a radiator or heat register.
If you place the Monitor on a rack or
bookcase, ensure that there is adequate
ventilation and that you've followed the
manufacturer's instructions for mounting.

This plasma display is designed to be
mounted horizontally (wide viewing).
Any inquiry regarding its vertical position
should be forwarded to the manufacture
directly

7

OWNER'S MANUAL

Precaution

POWER

Use only the accessory cord designed for this product to
prevent shock. The power supply voltage rating of this
product is AC100-240V, the power cord attached conforms
to the following power supply voltage. Use only the power
cord designated by our dealer to ensure Safety and EMC.
When it is used by other power supply voltage, power cable
must be changed. Consult your product dealer.

CAUTION

Unplug the Monitor from the wall outlet
before cleaning. Use a damp cloth; do not
use liquid or aerosol cleaners.

Unplug the Monitor from the wall outlet and
disconnect the antenna or cable system during a
lightning storm or when left unattended and unused
for long periods of time. This will prevent damage to
the unit due to lightning and power-line surges.

Use only a grounded or polarized

Do not touch the plug with wet
hand.

- It can make an electric
shock.

outlet. For your safety, this Monitor is
equipped with a polarized alternating
current line plug having one blade
wider than the other. This plug will fit
into the power outlet only one way. If
you are unable to insert the plug fully
into the outlet, try reversing the plug.
If the plug still does not fit, contact
your electrician to replace your outlet.

Protect the power cord. Power supply cords should be
routed so that they won't be walked on or pinched by
objects placed on or against them. Pay particular
attention to cords at plugs, convenience receptacles,
and the point where they exit from the unit.

Protect the power cord. Power
supply cords should be routed
so that they won't be walked on
or pinched by objects placed on
or against them. Pay particular
attention to cords at plugs,
convenience receptacles, and
the point where they exit from
the unit.

8

OWNER'S MANUAL

Precaution

Operation

Upon completion of any service or
repairs to this Monitor, ask the
service technician to perform safety
checks to determine that the Monitor
is in a safe operating condition.

Do not place anything containing
liquid on top of the Monitor.

-This may cause a fire or could
give an electric shock.

CAUTION

Never add any attachments and/or
equipment without approval of the
manufacturer. Such additions can
increase the risk of fire, electric
shock, or other personal injury.

In case of smoke or strange smell from the
Monitor, switch it off, unplug it from the wall outlet
and contact your dealer or service center.

- This may cause a fire or could give an electric
shock.

Operation

When replacement parts are required,
be sure the service technician uses
replacement parts specified by the
manufacturer or those that have the
same characteristics as the original
part. Unauthorized substitutions may
result in additional damage to the unit.

If you make adjustments yourself, adjust
only those controls that are covered by
the operating instructions.
Adjusting other controls may result in
damage and will often require extensive
work by a qualified technician to restore
the Monitor to normal.

Do not insert anything through the openings in
the unit, where they can touch dangerous
voltage points or damage parts. Never spill
liquid of any kind on the Monitor.

WARNING

Do not let children hang on or
ride on the TV.

9

OWNER'S MANUAL

Precaution

Operation

DO not use new battery with
old one.
– This can lead a fire or
electric shock caused by
leakage liquid from abused
batteries .

Put the batteries in right
direction (+/-).

- Otherwise, it can make a fire,
injury and pollution caused by
bursting of batteries.

WARNING

Only use the specified
batteries.

-This make cause
damaged the Monitor or
could give an electric
shock.

More than two people are necessary
to move or take off the package due
to the product’s weightiness.

- Otherwise, it can cause personal
injury.

The distance between eyes and
the screen should be about 5~7
times as long as diagonal length
of the screen.

- If not, eyes will strain.

Keep the batteries out of reach of
children when exchanged.

- Seek urgent medical advice if
child swallows a battery.

Avoid having a fixed image remain
on the screen for a long period of
time. Typically a frozen still picture
from a VCR, 4:3 picture format or if
a CH label is present; the fixed
image may remain visible on the
screen.

When moving the Monitor assembled with
speakers do not carry holding the
speakers.

-This may cause the Monitor to fall,
causing serious injury to a child or adult,
and serious damage to the Monitor.

10

OWNER'S MANUAL

OSD Key Position

Viewing the Control Panel

OSD Key Function

INPUT SELECT

Select the signal source from multiple input sources such as TV, SCART 1, SCART 2, S-Video / AV,
COMPONENT1, COMPONENT2,PC , DVI and HDMI.

VOL/CH ▲/▼(HP-XXXXV) OR VOL/CH -/+(HP-XXXXVP)

To change the CHANNEL ,press ▼button first and change the channel with ▲,▼buttons.
To change the VOLUME ,press ▲button first and change the volume with ▲,▼buttons. (HP-XXXXV Only)
To change the CHANNEL and VOLUME. (HP-XXXXVP Only)

Stand By ON/OFF

Turn the TV on and off.

Menu (HP-XXXXVP Only)

Call the OSD Menu

Accessories

Remote Control Handset Power Cord RF Cable Alkaline Batteries Owner’s Manual

11

OWNER'S MANUAL

Viewing the Connecting Panel

Back Panels and Jacks

1. DVI & D-Sub(PC) Sound 2. DVI(HDCP) 3. HDMI

4. RS-232C 5. D-Sub(PC) 6. Component1,2

7. Component Sound1,2 8. SCART 1 9. SCART 2

10. Phone Jack 11. S-Video Input 12. AV Input

13. AV / S-Video Sound 14. TV Antenna 15. AC Power

16. Speakers(HP-XXXXV Only)

12

OWNER'S MANUAL

Viewing the Connection Panel

-DVI, D-Sub(PC) Sound
Cable
Connect (1) port.

-RS-232C Cable
Connect (4) port.

-Component & S-Video
& AV Sound Cable

Connect (7) and (13) port.

-DVI Cable
Connect (2) port.

-D-Sub(PC) Cable

Connect (5) port.

-SCART Cable

Connect (8), (9) port.

-HDMI Cable
Connect (3) port.

-Component Cable
Connect (6) port.

-Phone Jack Cable
Connect (10) port.

-S-Video Cable
Connect (11) port.

-AC Power Cable
Connect (15) port.

Connectors

RCA Pin JackAUDIO INPUT
21 Pin Euro AV (SCART)VIDEO INPUT
21 Pin Euro AV (SCART)VIDEO OUTPUT
Mini Din 4 Pin S-VIDEO INPUT

RCA Pin JackCOMPONENT VIDEO INPUT
Mini D-Sub 15pinANALOG RGB INPUT

HDMI CableHDMI INPUT

DVI-D 24 pinDIGITAL VIDEO INPUT

-AV Cable
Connect (12) port.

-RF Cable
Connect (14) port.

RS-232C Configurations

3-Wire (Non-standard)

TVPC

TXD32RXD
RXD23TXD
GND55GND
DTR44DTR
DSR66DSR
RTS77RTS

• Cables connecting the PC vary according to the
type of machine, so consult your product dealer

CTS88CTS

.

13

OWNER'S MANUAL

Viewing the Remote Control

Button Description

1. Stand By

Turn the TV on and off.

12

2. Mute

Temporarily cut the sound and restore it.

3

6

8

13

14

5

4

7

10

9

12

11

15

3. Pre PG

Turn to the previous programme or exit OSD.

4. V.Size

Choose the screen form.
16:9 > 4:3 > Panorama > Zoom1 > Zoom2

5. FAVORITE (FAVOURITE)

Tune to your next favorite programme.

6. TEXT

Teletext on / off.
TEXT > MIX > Twin > Normal (TTX off)

7. INPUT

Display the input source list.

8. Menu / Set

Display the main OSD menu.
Activate your choice in the OSD menu.

9. Exit

Return to the previous OSD menu.

10. PG+

Move to the upper programme.

11. Sub PG

12. Sub Title

13. Sub Page

14. PG+/ PG-

Move to the upper programme.

15. VOL+/ VOL-

Increase the volume level

14

OWNER'S MANUAL

1. MTS

Choose the MTS (Stereo) mode. Each time it is pressed,
different mode is selected.
Mono > Stereo > Language A > Language B > Language AB
* You can select only available modes depending on
the source.

2. INFO

Display the current information.

3. PICTURE

There are 4 picture modes.
STANDARD > Vivid > Mild > USER

4. STILL

Temporarily freeze the screen and restore it.

Remote Control

2
1
6
5

9
10
13

3
4
7

8
12
11
16

14 15

TTX / programme Edit keys

9. ERASE

5. SOUND

Choose the sound equalizer settings.
STANDARD > Movie > Music > News > USER

6. SLEEP

Set the preset time interval for automatic turn-off.
OFF( Not work ) > 10min. > 20 > 30 > 60 > 90 > 120 >

150 > 180

7. TIME

Display the current time on the screen.

8. DIGEST

Display the 16 TV programmes at the same time.

PIP (Picture In Picture) Keys

13. MODE ( On / Off)

Erase the current programme.

10. SKIP

Make the programme skipped.

11. INSERT

Add the current programme.

12. REPLACE

Replace the selected programme with
the current programme.

* See 32 page.
** These keys are the colour keys in TTX also.

Activate PIP function and change the PIP
window size and PIP mode.
Small > Large > Twin (Half) > OFF

14. SOURCE

Change the PIP window source.

15. SWAP

Swap the main screen and the PIP window.

16. MOVE

Move the position of the PIP window.

15

OWNER'S MANUAL

Viewing the Picture-in-Picture

MOVE KEY : Move the position of PIP

Left Up

Left down

Right Up

Right Down (Start)

SWAP KEY : Swap the sources of the main

screen and PIP Window.

MODE KEY : Change the PIP window mode.

OFF→SMALL→LARGE→TWIN

SMALL LARGE TWIN

Source Key : Change the source of the PIP window. The available sources are shown as below

Main

SCART 2SCART 1TV

PIP

SCART 1

S-Video /

AV

DVI

O
O
O

O
O

HDMIPCComponent2Component1

OOOOOOOOTV
OOOOOOXO
OOOOOXOOSCART 2

OOOOXOOOS-Video
OOOXOOOOComponent1

Component2

PC

DVI

HDMI

16

O
X
X
X

OOXOOOOO
XXOOOXXO
XXOOOXXO
XXOOOXXO

OWNER'S MANUAL

Controls Of The Remote Control

Loading The Batteries

Press on the cover and slide
in the direction of the arrow.

Load two AAA batteries,
taking care that the + and ­ends face the correct
direction.

Reception range of remote control

Close the cover until it clicks.

17

OWNER'S MANUAL

Installation

18

OWNER'S MANUAL

Installation

19

OWNER'S MANUAL

Be sure TV power is turned off before making any connections.

Place the speakers in the position you want. Install the speaker wires on the TV and
speaker. Be sure to connect the positive "+" wire to the "+" input and the negative "-" wire
to the "-" input. Connect left TV input to left speaker and right TV input to right speaker.
Any extra speaker wire length remaining can be bunched into the wire holders provided.
(Caution: Once installed, the speaker wire holders lock into position and can't be
removed.)

• Always lift the TV itself (not the speakers) when handling or moving the TV after

speakers have been installed.

20

OWNER'S MANUAL