H&b HL-3200V, HL-3700V, HL-4000V, HL-4200V User Manual

LCD TV

HL-3200V / HL-3700V
HL-4000V / HL-4200V

1

OWNER'S MANUAL

PAL

Contents

Foreword

■ Caution 3

■ Important Safety Instructions 4

■ Precaution 5

Overviewing your the Monitor

■ Viewing the Control Panel 10

■ Viewing the Connecting Panel 11

■ Viewing the Remote Control

- Key Description 13

- PIP(Picture In Picture) 15

- Loading the Batteries

16

Installation

■ Table Stand Installation 17

■ Speaker Installation 18

Connection the Cable/Devices

■ Connection the TV Cable 19

■ Connection the VCR 20

■ Connection the DVD 21

■ Connection the Set Top Box 22

■ Connection the PC (D-Sub & DVI) 23

■ Displayable Monitor Specification 24

Setting the Channel

■ Basic Operation 25

■ OSD Menu Structure 26

■ Storing Channels Automatically 27

■ Storing Channels Manually 29

■ Fine Tunning the Channel Reception 29

■ Editing the Channels 30

■ Digest Function 31

■ Teletext 32

Setting the Picturel

■ Changing the Picture Mode 33

-Adjusting the User Mode 33

■ Changing the Colour Temperature 35

2

OWNER'S MANUAL

Contents

Setting the Picture

■ Color Enhancer 35

■ Video NR(Noise Reduction) 36

■ Changing the Screen Form 36

■ Selecting the Black Enhancer 37

■ Adjusting the PC Screen(Geometry) 38

Setting the Sound

■ Adjusting the Sound Balance 40

■ Changing the Sound Mode 40

■ Adjusting User Sound Mode 41

■ Spatial Effect 41

■ AVC (Auto Volume Control) 41

■ MTS (Multichannel Television Sound) 42

Setting the Others

■ Aujusting the Transparency of the OSD Window 43

■ PIP(Picture In Picture) 43

- Changing the Size in PIP 44

- Choosing the Source in PIP 44

- Picture Swap in PIP 45

- Changing the Position in PIP 46

■ Other Advanced Function

- Set ID in Advanced 46

- Setting the Blue Screen Mode 46

- Changing the OSD Language 47

- Front Key Lock in Advance 47

Setting the Time

■ Setting the Current Time 48

■ Setting the On Time 48

■ Setting the Off Time 50

■ Setting the Sleep Timer 50

Troubleshooting

57

Spec.

Warranty Card

58

63

3

OWNER'S MANUAL

Caution

CAUTION

- TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD.

- DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

- SHOCK HAZARD DO NOT OPEN.

CAUTION

These servicing instructions are for use by qualified service
personnel only. To reduce the risk of electric shock, do not
perform any servicing other than that contained in the operating
instructions unless you are qualified to do so.

CAUTION

The stand intended for use only with This TV. Use with other
apparatus is capable of resulting in Instability causing possible
injury .

WARNING

- Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be
placed on the apparatus.

- This is Class B product. In a domestic environment this product may cause radio interference in wh ich case the
user may be required to take adequate measures.

- To reduce the risk of fire and electric shock, do not expose this product to rain or moisture.

FCC NOTICE

This device has been tested and found to comply with the limits for a Class B device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in ho me environment
as well as in a commercial, industrial or business environment. This equipment can generate, use and radiate radio
frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures :

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Changes or modification not expressly approved by the party responsible for compliance could void th e user's
authority to operate the equipment.

Connecting of peripherals requires the use of grounded shielded signal cables.

Always be careful when using your Monitor. To reduce the risk of fire, electrical shock, and other
injuries, keep these safety precautions in mind when installing, using, and maintaining your machine.

Read all safety and
operating instructions before
operating your Monitor.

Keep the safety and operating
instructions for future
reference.

4

Heed all warnings on the
Monitor and in the operating
instructions.

OWNER'S MANUAL

Precaution

Always be careful when using your TV. To reduce the risk of fire, electrical shock, and other injuries,
keep these safety precautions in mind when installing, using, and maintaining your machine.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with a dry cloth.

7) Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.

11) Only use the attachments/accessories specified by the manufacturer.

12) Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.

15) When installing the LCD TV, do not block the appliance coupler with any structure.
User can easily have access to the coupler to disconnect it from AC main power.

5

OWNER'S MANUAL

Precaution

In case of the following cases, unplug the unit from the wall outlet
and contact qualified service center.

* When power supply code or plug is damaged
* If liquid has been spilled on the unit or if alien objects have fallen into the unit.
* If the monitor has been exposed to rain or water.
* If the monitor does not operate normally by following the operating instructions.
* If the monitor dropped or the cabinet has been damaged
* When the monitor exhibits a distinct change in performance.

Setting

Avoid overhead power lines. An outside
antenna system should not be placed in the
vicinity of overhead power lines or other

Do not use the Monitor where

Follow all operating and use
instructions.

Ground outdoor antennas. If an outside antenna or cable system is connected to the Monitor, be sure the
antenna or cable system is grounded so as to provide some protection against voltage surges and built-up
static charges. Section 810 of the National Electrical Code, ANSI/NFPA No.70-1984, provides information
about proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.

contact with or immersion in
water is a possibility, such as
near bath tubs, sinks, washing
machines, swimming pools, etc.

electric light or power circuits or where it can
fall into such power lines or circuits. When
installing an outside antenna system, be
extremely careful to keep from touching the
power lines or circuits. Contact with such
lines can be fatal.

CAUTION

Bend antenna cable between
inside and outside building to
prevent rain from flowing in.

-This may cause water damaged
inside the Monitor and could give
an electric shock.

Do not place an outside antenna
in the vicinity of overhead power
lines, other electric light or power
circuits.

- This may cause an electric
shock.

6

There should be enough distance
between an outside antenna and
power lines to keep the former
from touching the latter even when
the antenna falls.

- This may cause an electric shock.

OWNER'S MANUAL

Precaution

Setting

When installing the Monitor on a table,
be careful not to place the edge of its
stand.

- This may cause the Monitor to fall,
causing serious injury to a child or
adult, and serious damage to the
Monitor.

WARNING

Provide ventilation for the Monitor. The unit
is designed with slots in the cabinet for
ventilation to protect it from overheating.
Do not block these openings with any
object, and do not place the Monitor on a
bed, sofa, rug or other similar surface. Do
not place it near a radiator or heat register.
If you place the Monitor on a rack or
bookcase, ensure that there is adequate
ventilation and that you've followed the
manufacturer's instructions for mounting.

This plasma display is designed to be
mounted horizontally (wide viewing).
Any inquiry regarding its vertical position
should be forwarded to the manufacture
directly

7

OWNER'S MANUAL

Precaution

POWER

Use only the accessory cord designed for this product to
prevent shock. The power supply voltage rating of this
product is AC100-240V, the power cord attached conforms
to the following power supply voltage. Use only the power
cord designated by our dealer to ensure Safety and EMC.
When it is used by other power supply voltage, power cable
must be changed. Consult your product dealer.

CAUTION

Unplug the Monitor from the wall outlet
before cleaning. Use a damp cloth; do not
use liquid or aerosol cleaners.

Unplug the Monitor from the wall outlet and
disconnect the antenna or cable system during a
lightning storm or when left unattended and unused
for long periods of time. This will prevent damage to
the unit due to lightning and power-line surges.

Use only a grounded or polarized

Do not touch the plug with wet
hand.

- It can make an electric
shock.

outlet. For your safety, this Monitor is
equipped with a polarized alternating
current line plug having one blade
wider than the other. This plug will fit
into the power outlet only one way. If
you are unable to insert the plug fully
into the outlet, try reversing the plug.
If the plug still does not fit, contact
your electrician to replace your outlet.

Protect the power cord. Power supply cords should be
routed so that they won't be walked on or pinched by
objects placed on or against them. Pay particular
attention to cords at plugs, convenience receptacles,
and the point where they exit from the unit.

Protect the power cord. Power
supply cords should be routed
so that they won't be walked on
or pinched by objects placed on
or against them. Pay particular
attention to cords at plugs,
convenience receptacles, and
the point where they exit from
the unit.

8

OWNER'S MANUAL

Precaution

Operation

Upon completion of any service or
repairs to this Monitor, ask the
service technician to perform safety
checks to determine that the Monitor
is in a safe operating condition.

Do not place anything containing
liquid on top of the Monitor.

-This may cause a fire or could
give an electric shock.

CAUTION

Never add any attachments and/or
equipment without approval of the
manufacturer. Such additions can
increase the risk of fire, electric
shock, or other personal injury.

In case of smoke or strange smell from the
Monitor, switch it off, unplug it from the wall outlet
and contact your dealer or service center.

- This may cause a fire or could give an electric
shock.

Operation

When replacement parts are required,
be sure the service technician uses
replacement parts specified by the
manufacturer or those that have the
same characteristics as the original
part. Unauthorized substitutions may
result in additional damage to the unit.

If you make adjustments yourself, adjust
only those controls that are covered by
the operating instructions.
Adjusting other controls may result in
damage and will often require extensive
work by a qualified technician to restore
the Monitor to normal.

Do not insert anything through the openings in
the unit, where they can touch dangerous
voltage points or damage parts. Never spill
liquid of any kind on the Monitor.

WARNING

Do not let children hang on or
ride on the TV.

9

OWNER'S MANUAL

Precaution

Operation

DO not use new battery with
old one.
– This can lead a fire or
electric shock caused by
leakage liquid from abused
batteries .

Put the batteries in right
direction (+/-).

- Otherwise, it can make a fire,
injury and pollution caused by
bursting of batteries.

WARNING

Only use the specified
batteries.

-This make cause
damaged the Monitor or
could give an electric
shock.

More than two people are necessary
to move or take off the package due
to the product’s weightiness.

- Otherwise, it can cause personal
injury.

The distance between eyes and
the screen should be about 5~7
times as long as diagonal length
of the screen.

- If not, eyes will strain.

Keep the batteries out of reach of
children when exchanged.

- Seek urgent medical advice if
child swallows a battery.

When moving the Monitor assembled with
speakers do not carry holding the
speakers.

-This may cause the Monitor to fall,
causing serious injury to a child or adult,
and serious damage to the Monitor.

10

OWNER'S MANUAL

OSD Key Position

Viewing the Control Panel

OSD Key Function

INPUT SELECT

Select the signal source from multiple input sources such as TV, SCART 1, SCART 2, S-Video / AV,
COMPONENT1, COMPONENT2, PC , DVI and HDMI.

VOL/CH

To change the CHANNEL ,press ▼button first and change the channel with ▲,▼buttons.
To change the VOLUME ,press ▲button first and change the volume with ▲,▼buttons.

Stand By ON/OFF

Turn the TV on and off.

Accessories

Remote Control Handset Power Cord RF Cable Alkaline Batteries Owner’s Manual

11

OWNER'S MANUAL

Viewing the Connecting Panel

Back Panels and Jacks

1. DVI & D-Sub(PC) Audio in 2. DVI (HDCP) 3. HDMI

4. RS-232C 5. D-Sub(PC) 6. Component1,2

7. Component Sound1,2 8. SCART 1 9. SCART 2

10. Phone Jack 11. S-Video Input 12. AV Input

13. AV / S-Video Sound 14. TV Antenna in 15. AC Power

16. Speakers output

12

OWNER'S MANUAL

Viewing the Connection Panel

-DVI, D-Sub(PC) Sound
Cable
Connect (1) port.

-RS-232C Cable
Connect (4) port.

-Component & S-Video
& AV Sound Cable

Connect (7) and (13) port.

-S-Video Cable
Connect (11) port.

-DVI Cable
Connect (2) port.

-D-Sub(PC) Cable

Connect (5) port.

-SCART Cable

Connect (8), (9) port.

-AV Cable
Connect (12) port.

-HDMI Cable
Connect (3) port.

-Component Cable
Connect (6) port.

-Phone Jack Cable
Connect (10) port.

-RF Cable
Connect (14) port.

-AC Power Cable
Connect (15) port.

Connectors

RCA Pin JackAUDIO INPUT
21 Pin Euro AV (SCART)VIDEO INPUT
21 Pin Euro AV (SCART)VIDEO OUTPUT
Mini Din 4 Pin S-VIDEO INPUT

RCA Pin JackCOMPONENT VIDEO INPUT
Mini D-Sub 15pinANALOG RGB INPUT

HDMI CableHDMI INPUT

DVI-D 24 pinDIGITAL VIDEO INPUT

• Cables connecting the PC vary according to the
type of machine, so consult your product dealer

RS-232C Configurations

3-Wire (Non-standard)

TVPC

TXD32RXD
RXD23TXD
GND55GND
DTR44DTR
DSR66DSR
RTS77RTS
CTS88CTS

.

13

OWNER'S MANUAL

Viewing the Remote Control

Button Description

1. Stand By

Turn the TV on and off.

12

2. Mute

Temporarily cut the sound and restore it.

3

6

8

13

14

5

4

7

10

9

12

11

15

3. Pre PG

Turn to the previous programme or exit OSD.

4. V.Size

Choose the screen form.
16:9 > 4:3 > Panorama > Zoom1 > Zoom2

5. FAVORITE (FAVOURITE)

Tune to your next favorite programme.

6. TEXT

Teletext on / off.
TEXT > MIX > Twin >Normal (TTX off)

7. INPUT

Display the input source list.

8. Menu / Set

Display the main OSD menu.
Activate your choice in the OSD menu.

9. Exit

Return to the previous OSD menu.

10. PG+

Move to the upper programme.

11. Sub PG

12. Sub Title

13. Sub Page

14. PG+/ PG-

Move to the upper programme.

15. VOL+/ VOL-

Increase the volume level

14

OWNER'S MANUAL

1. MTS

Choose the MTS (Stereo) mode. Each time it is pressed,
different mode is selected.
Mono > Stereo > Language A > Language B > Language AB
* You can select only available modes depending on
the source.

2. PG INFO

Display the current information about time,
screen form, source and MTS mode.

3. PICTURE

There are 4 picture modes.
STANDARD > Vivid > Mild > USER

4. STILL

Remote Control

2
1
6
5

9
10
13

3
4
7

8
12
11
16

14 15

TTX / programme Edit keys

9. ERASE

Erase the current programme.

10. SKIP

Temporarily freeze the screen and restore it.

5. SOUND

Choose the sound equalizer settings.
STANDARD > Movie > Music > News > USER

6. SLEEP

Set the preset time interval for automatic turn-off.
OFF( Not work ) > 10min. > 20 > 30 > 60 > 90 > 120 >

150 > 180

7. TIME

Display the current time on the screen.

8. DIGEST

Display the 16 TV programmes at the same time.

PIP (Picture In Picture) Keys

13. MODE ( On / Off)

Activate PIP function and change the PIP
window size and PIP mode.

Make the programme skipped.

11. INSERT

Add the current programme.

12. REPLACE

Replace the selected programme with
the current programme.

* See 31 page.
** These keys are the colour keys in TTX also.

Small > Large > Twin (Half) > OFF

14. SOURCE

Change the PIP window source.

15. SWAP

Swap the main screen and the PIP window.

16. MOVE

Move the position of the PIP window.

15

OWNER'S MANUAL

Viewing the Picture-in-Picture

MOVE KEY : Move the position of PIP

Left Up

Left down

Right Up

Right Down (Start)

SWAP KEY : Swap the sources of the main

screen and PIP Window.

MODE KEY : Change the PIP window mode.

OFF→SMALL→LARGE→TWIN

SMALL LARGE TWIN

Source Key : Change the source of the PIP window. The available sources are shown as below

Main

SCART 2SCART 1TV

PIP

SCART 1

Component2

PC

DVI

HDMI

S-Video /

AV

DVI

O
O
O

O
O

O
X
X
X

HDMIPCComponent2Component1

OOOOOOOOTV
OOOOOOXO
OOOOOXOOSCART 2

OOOOXOOOS-Video
OOOXOOOOComponent1

OOXOOOOO
XXOOOXXO
XXOOOXXO
XXOOOXXO

16

OWNER'S MANUAL

Controls Of The Remote Control

Loading The Batteries

Press on the cover and slide
in the direction of the arrow.

Load two AAA batteries,
taking care that the + and ­ends face the correct
direction.

Reception range of remote control

Close the cover until it clicks.

17

OWNER'S MANUAL

Installation

Stand Installation

18

OWNER'S MANUAL

Be sure TV power is turned off before making any connections.

Place the speakers in the position you want. Install the speaker wires on the TV and
speaker. Be sure to connect the positive "+" wire to the "+" input and the negative "-" wire
to the "-" input. Connect left TV input to left speaker and right TV input to right speaker.
Any extra speaker wire length remaining can be bunched into the wire holders provided.
(Caution: Once installed, the speaker wire holders lock into position and can't be
removed.)

• Always lift the TV itself (not the speakers) when handling or moving the TV after

speakers have been installed.

19

OWNER'S MANUAL

Watching TV

Connection the TV Cable

Connect the TV antenna cable to the TV input jack. Press INPUT button on the
remote control and select TV on OSD.

Use PG+, PG- button or numeric key to change TV programme for your
programme selection.

Press Pre PG key on the remote control to tune the previous programme.

Also, you can tune to cable service provided programmes using the cable box.
For further information regarding cable TV service, contact cable TV service
provider(s).

The Function of SCART2 Port

This signal of SCART2 port takes first priority over other input signals.

When an outer device which is connected to SCART2 port is "Power On", the monitor will automatically

display the signal of SCART2 port.

The display mode (4:3, 16:9) will be automatically recognized until users purposely change the display

mode. When users operate up/down button or numeric button on the remote control, input source is

changed to TV mode automatically.

The SCART2 recognizes automatically both composite signal and RGB signal.

20

OWNER'S MANUAL

Watching VCR

Connecting the VCR
With SCART (Eurocable)

Connect a SCART cable to the SCART jacks of the VCR and the TV.

With S-Video

Connect a S-Video cable to the S-Video jacks of the VCR and the TV.
Connect L (White), R (Red) sound cable (composite) to the sound jacks of
the VCR and the TV.

With AV input

Connect a composite cable to the AV video jacks of the VCR and the TV.
Connect L (White), R (Red) sound cable (composite) to the sound jacks of
the VCR and the TV.

Watching VCR

Press INPUT button on the remote control and select Video Sources.
Insert a video tape into the VCR and press the PLAY key on the VCR.

• To avoid picture noise (interference), leave an adequate distance(over 3m) between the VCR
and monitor.

• When connecting the TV with external equipments, match the colour of connecting ports
( e.g. Video -yellow, Audio(L) - white, Audio(R) - red).

• If you have a mono VCR, connect the audio cable from the VCR tothe AUDIO(L/MONO) input of
the TV.

• If you connect an S-VHS VCR to the S-VIDEO input socket, you can get a better picture quality
than normal video input (AV).

21

OWNER'S MANUAL

Watching DVD

Connecting the DVD

• Connect the three separate component video cables to the DVD player’s Y, Pb and Pr jacks and
to the Component jacks on the TV.

• Connect the audio cable to the DVD player’s audio L (White) and R (Red) jacks and to the L and R audio
jacks beside the Component jacks on the TV.

• Connect the HDMI cables to the DVD player’s

and to the HDMI cables on the TV.

How to use

Turn on the DVD player.

Press INPUT button on the remote
control of the TV and select HDMI,
Component1 or Component2.

Component Input ports

You can get better picture quality
if you connect DVD player with
component input sockets as
below.

480i/60Hz
480p/60Hz
576i/50Hz

576p/50Hz
720p/50Hz
720p/60Hz
1080i/50Hz
1080i/60Hz

Component ports of the

Monitor

Video output ports

of DVD player

Supported Signals

Y P

Y Pb Pr
Y B-Y R-Y
Y Cb Cr
Y P

HDMIDVIPCComponent2Component1

XXXOO
OOOOO
XXXOO

OOOOO
OOOOO
OOOOO
OOOOO
OOOOO

B PR

B PR

• Normal DVD source is based on 480i, which should be through normal YPbPr of Component signal.

22

OWNER'S MANUAL

Watching Set Top Box

How to connect

Connect Set Top Box video inputs to SCART, COMPONENT, HDMI,PC or DVI jacks on the TV.
Audio inputs to Audio sockets beside theL (White) and R (Red) audio jacks which you connect video inputs..

How to use

Turn on the Set Top Box.

Press INPUT button on the
remote control of the TV and
select Component1,
Component2, HDMI, PC or DVI.

How to connect

480i/60Hz
480p/60Hz
576i/50Hz

576p/50Hz
720p/50Hz
720p/60Hz
1080i/50Hz
1080i/60Hz

Supported Signals

HDMIDVIPCComponent2Component1

XXXOO
OOOOO
XXXOO

OOOOO
OOOOO
OOOOO
OOOOO
OOOOO

With SCART (Eurocable)

Connect a SCART cable to the SCART jacks of the STB and the TV.

With Component

Connect a three separate component cables to the component jacks of the STB and the TV.
Connect L (White) and R (Red) sound cables (composite) to the sound jacks of the STB and

the TV.

With HDMI

Connect a HDMI cable to the HDMI jacks of the STB and the TV

With RGB or DVI

Connect a D-Sub or DVI cable to the AV video jacks of the STB and the TV.
Connect L (White)and R (Red) sound cables (composite) to the sound jacks of the STB and the

TV.

23

OWNER'S MANUAL

Connecting The PC (D-Sub and DVI)

Connecting a PC to the TV

• Connect a PC (15pin) video cable between the Video Output port on the PC and the PC port on the TV.

Pin Configuration

• 15Pin Signal Cable

(based on protruded pin)

To watch the PC screen

1. Turn on the TV and press INPUT
button to select the PC MODE.

2. Turn on the PC and check for the PC
requirements.

3. Adjust the PC screen in Position menu.
( See 39 page. )

Description

Red (R)

Green (G)

Blue (B)

Grounding

Grounding (DDC)

Red (R) Grounding

Green (G) Grounding

Blue (B) Grounding

Reserved

Sync Grounding

Grounding

Data (DDC)

Horizontal sync.

Vertical sync.

Clock (DDC)

DescriptionPin NO.

Red(R)1

Green(G)2

Blue(B)3

Grounding4

Grounding(DDC)5

Red(R) Grounding6

Green(G) Grounding7

Blue(B) Grounding8

Resered9

Sync Grounding10

Grounding11

Data(DDC)12

Horizontal sync.13

Vertical sync.14

Clock(DDC)15

24

OWNER'S MANUAL

Displayable TV Specification

Vertical Frequency (Hz)Horizontal Frequency (KHz)Resolution

720 X 400

640 X 480

800 X 600

70.0831.469

85.0337.927

59.9431.469

66.6635.000

72.8037.861

75.0037.500

85.0043.269

90.0345.913

100.0453.011

56.2535.156

60.3137.879

72.1848.077

75.0046.875

85.0653.674

90.0056.000

100.0064.016

1024 X 768

•

Synchronization input form : separate

• The TV recognizes 640x480@60Hz signal
as 480p DTV signal. So the signal is expanded,
please try other signals like 640x480@75HZ

• The TV operates abnormally if a

non-standard video format is selected.

74.5549.725832 X 624

60.0048.363

70.0656.476

75.02960.023

84.99768.677

75.0067.501152 X 864

60.0064.001280 X 1024

• Depending on the manufacturer, your PC screen might

appear differently (and depending on your particular
version of Windows).
Check your PC instruction book for information about
connecting your PC to a the TV

• The TV may operate abnormally if a non-standard
video signal

• “Out of Range” message box will appear when an

over-spec video signal is input. Change th video settings
of PC when the message is displayed

25

OWNER'S MANUAL

Basic Operation

Turning the Monitor On And Off

Press the Power key on the remote control. The TV will turn on and you will be ready to use its features.
You can also use the Power key on the front panel.

Select Source

Press INPUT key on the remote control. Then you can see the source list menu shown as below.

Select the source to watch with / key on the remote
control and press the Menu / Set button.

Source list menu

TV program Selection

Connect the signal source (TV antenna) to TV input. Press INPUT button on the remote control
and select TV on the source list.

Use PG+, PG- key or numeric key to change TV programme you want.

Press Pre PG key on the remote control to watch the previous programme.

Also, you can tune the cable service, provided programmes while using the cable box. For
further information regarding cable TV service, contact your TV service provider(s).

Volume Control

Use VOL+ / VOL- key on the remote control to adjust the volume level.
Press MUTE key on the remote control when you need to cut the sound temporarily.

26

OWNER'S MANUAL

OSD Menu Structure

• OSD (On Screen Display) allows users to control or adjust various features and settings in
accordance with his/her preferences.

• Press the Menu/Set button on the remote control to see the main OSD menu.

EXAMPLE of OSD Menu

1

2

B

A

1. Main Menu

Press Menu / Set key on the remote control to enter the main OSD menu.
First, select Main menu item you need with & key.
To select a main menu items, just press or Menu/Set button on
the Remote Control.

2. Sub Menu

Each menu item has its own sub menu items to set.

3. Sub Menu items

A : If there is no ◄►part, the item has an sub menu.

◄►part

You can enter the under menu and adjust an item you need.
Select sub-menu item with / keys on the remote control and press or

Menu/Set button
to enter the submenu.
B : If there is a ◄►part, you can set the item by selecting ◄►. Ex) ◄ ON ► or ◄ OFF ►
Press or Menu/Set key to set a ◄►part, and adjust it with / keys.

27

OWNER'S MANUAL

CHANNEL (TV)

AUTO SCAN

You can now search for and store the TV channels in two different ways : using Auto Scan or
Manual Scan.

Auto Scan

1. Press Menu/set button to display the
main OSD menu.

2. Select the TV Main menu.

3. Press Menu/Set to enter the sub
menu.

4. Select Auto Scan with / keys and
press Menu/Set key on the remote
control. Then there will appear the
Auto Scan sub menu.

5. Select your country. Then the tuning
bar will appear. The scanning will
start.

The supported countries are shown as below.

Belgium
Czech Rep.
Denmark
Germany
England
Spain
Finland
France
Great Britain
Greece
Hungary
Ireland
Italy
Netherlands
Norway
Poland

Sweden
Turkey
Switzerland
East Europe
Others

Auto Scan for other countries, please refer to the next page

You can enter the TV menu in TV mode only. (When you watch a TV programme.)

28

OWNER'S MANUAL

Auto Scan (Other Countries)

• ASIA

OthersSaudi Arabia

CHANNEL (TV)

SelectionNationSelectionNation

OthersIsraelOthersMalaysia

OthersKuwaitOthersPakistan

OthersAnrab EmiratesOthersSingapore

Czech RepublicChinaOthersIran

• Europe

SelectionNationSelectionNation

HungaryEstonianOthersAlbania

HungaryGeorgiaOthersAndorra

HungaryLatviaOthersCroatia

HungaryLithuaniaOthersIceland

HungaryRussia FedOthersMacedonia

HungaryUkraineSpainPortugal

PolandRomaniaHungaryArmenia

GreeceSlovakiaHungaryAzerbaijan

NetherlandsLuxembourgHungaryBelarus

FranceMonacoHungaryBulgaria

29

OWNER'S MANUAL

CHANNEL (TV)

Manual Scan

1. Press Menu/set button on the remote
control to display the main OSD
menu.

2. Select the TV main menu with /
key on the remote control.

3. Press Menu/Set button to enter the
sub menu.

4. Select Manual Scan with /
button and press Menu/Set button.

5. Then you can see the tuning bar. TV
will scan from channels to the
current channel.

Only scanned programmes can be stored as Favorite programmes.

Fine Tune

The Fine Tuning function lets you manually adjust the TV’s tuner if you have difficulty
tuning analog Channels.

1. Press Menu/set button to display
the main OSD menu.

2. Select the TV main menu.

3. Press Menu/Set to enter the
Fine tune sub menu.

4. Select Fine tune with /
button and press Menu/Set
button. Then you can see the
adjust bar.

5. Adjust the fine tune with or
button.

30

OWNER'S MANUAL

CHANNEL (TV)

Edit Favorite programme List

You can store of your favorite channels for each available input source (such as TV or CATV). Then,
when you press the FAVORITE button on the remote control, the TV display only the favorite
channels you previously stored, allowing you to quickly and easily find frequently wanted channels.

1. Press Menu/set button to display the
main OSD menu.

2. Select the TV main menu.

3. Press Menu/Set to enter the TV sub
menu.

4. Select Edit and press the Menu/Set
button. Then you can see the Favorite
programme List.

5. You can select a programme with /
button on the remote control.

To edit the list

You can INSERT, ERASE, SKIP and
REPLACE the programmes in the list.
Refer to the picture of the remote control
below.

To edit the programme in the list

If you want to edit a programme, pr ess
Menu/Set button. Then you can select a field
with / button. Press Menu/Set button
on the field to edit. Adjust the field with /
button. To return, press Exit button.

1. ERASE
Erase the selected programme from the list.

2. SKIP
Make the selected programme will be skipped.

3. INSERT
Insert new list item.

4. REPLACE
Replace the selected programme with the
Current programmes that you’re watching.

Only scanned channels can be set as Favorite Channels.

31

OWNER'S MANUAL

CHANNEL (TV)

Digest

With the Digest function, you can select a TV prgoramme watching 16 programme at
once. This function works in TV mode only.

1. Press the DIGEST button on the remote control. .

2. By Pressing the channel number. The selected
channel becomes main window.

3. You can make off the Digest Function by pressing
Digest button again.

1

16 side windows are renewed

2

3

4

clockwise. Next memorized
programme appear in the
renewed windows.

To choose the programme, press
the channel number with the
numeric buttons on the remote
control.

32

OWNER'S MANUAL

TELETEXT

Teletext On / Mix / Off

You can switch on and off teletext function by pressing TEXT key on remote control

TOP text

The user guide displays four fields - red, green, yellow and blue - at the bottom of the screen.
The yellow field denotes the next group and the blue field denotes next block.

• Block / Group / Page Selection

- With the blue key you can move block to block

- Use the yellow key to proceed to the next group with automatic overflow to the
next group.

- With the green key, you can go to the next exiting page. (Use PG+ key as alternate).

- With the red key, you can go to the previous page.(Use PG- key as alternate)

You can go to the page by pressing the NUMBER button on the remote control

FASTEXT

The teletext pages are color coded along the bottom of the screen and are selecte d
by pressing the corresponding colored key. Press index key to select the index page.
You can go to a page by pressing the NUMBER button on remote control. You can
move a page by pressing PG+ or PG- key to select the page you want to see.

33

OWNER'S MANUAL

PICTURE

Mode

- Your TV has 3 automatic factory preset picture settings (“Standard”, “Vivid”and “Mild”).
You can choose Standard, Vivid or Mild by pressing “Picture” key on the remote control (or
by making a selection from the menu). Or you can select USER which automatically recalls
your personalized picture settings.

1. Press Menu/set button to display
the main OSD menu.

2. Select the picture main menu.

3. Press Menu/Set to enter the sub
menu.

4. Select Mode and press
Menu/Set to enter the sub menu.
Then the picture sub mode
appear.

5. Select the picture mode and
press Menu/Set button.

6. You will see the picture setting
bars. Just Press Exit button on
the remote control. You can
adjust each values of the picture
setting, but the changed values
are stored as in USER mode.

* USER mode require more settings. It

has an under menu: See next
page.

Tint feature is enabled while Input

Signal is NTSC mode.

Alternative method : Just press the
“Picture” button on the remote
control. Each time it is pressed,
different mode is selected.

Adjust USER Mode

You can change the Contrast, Brightness, Color, and Sharpness according to personal
preference in USER mode.

1. Select the item to adjust
with , button.

2. Press Menu/Set button.

3. Adjust the item with ,
button.

4. To cancel all adjust, select
Recall and press Menu/Set
button.

Select USER mode (Previous page)

For a more detailed description of
these settings, see the next page.

34

OWNER'S MANUAL

PICTURE

Contrast

Adjust brightness difference between
bright part of the screen and dark part.

Brightness

Adjust brightness of the screen.

Distinct ◀▶Vague

Dark ◀▶Bright

Color

Adjust deep and light color of the screen.

Sharpness

Adjust vividness of the screen.

Tint

Adjusts the balance between green
and yellow

Decrease ◀▶Increase

Less sharp ◀▶Sharp

35

OWNER'S MANUAL

Temperature

- Your TV has 5 screen temperatures (color settings):

1. Press Menu/set key to display the main
OSD menu.

2. Select the picture main menu.

3. Press Menu/Set to enter the picture men u.

4. Select Temperature and press Menu/Set
to enter the under menu. Then the
Picture-Temperature under menu appear.

5. Select the Temperature mode with /
button and press Menu/Set key.

6. Press Exit button to return.

• Cool 1,2
Screen seems cool : Strong Blue

•NORMAL
Normal: Factory default.

PICTURE

• Warm 1,2

Screen seems warm : Strong Red

Color Enhancer

-This function will enhance the color level. Green, Blue and Skin color on the picture will
enhance, while others areas remain unchanged.

1. Press Menu/Set button to display the
main OSD menu.

2. Select the picture main menu item.

3. Press Menu/Set to enter the sub
menu.

4. Select Color Enhancer. Then the
cursor moves into the ◄► parts.

5. Turn on or off Film mode function
with / button and press Exit
button.

36

OWNER'S MANUAL

PICTURE

Video NR(Noise Reduction)

- This function automatically filters out and reduces the image noise and improves picture quality
where receiving weak signals.

1. Press Menu/Set button to display the
main OSD menu.

2. Select the picture main menu item.

3. Press Menu/Set to enter the sub
menu.

4. Select Video NR. Then the cursor
moves into the ◄► parts.

5. Turn on or off Video NR function
with / button and press Exit
button.

Screen Format

- Your TV has four Screen Formats: 16:9, 4:3 , PANORAMA, ZOOM1, ZOOM2.
( For more detail description for these modes, refer to the next page. )

1. Press Menu/Set button to
display the main OSD menu.

2. Select the picture main menu.

3. Press Menu/Set to enter the
picture menu.

4. Select Screen Format and
press Menu/Set to enter the
under menu. Then the Screen
Format under menu appear.

5. Select the screen format you
want and press Menu/Set button.

37

OWNER'S MANUAL

Screen Format Description

16 : 9

16:9 video: No change.
4:3 video: Expands 4:3 video signal

horizontally to fit the 16 : 9 screen.

Panorama

16:9 video: No change.
4:3 video: Expands 4:3 video horizontally to fit

the 16 : 9 screen and to minimize distortion,
sides are expanded more than center.

Zoom 1

Expands 16 : 9 mode screen vertically.

PICTURE

Zoom 2

Expands zoom 1 mode screen vertically.

4:3

16:9 video: The image is suppressed.
4:3 video: No expansion. There are gray areas

besides the image

Black Enhancer

- This will enhance the black level/ the contrast
of the picture. The dark regions of the picture
are made Darker, while bright areas remain
unchanged. The advantage of this black-level
expansion is that the black expansion is
performed only if it is noticeable to the viewer.

.

38

OWNER'S MANUAL

PICTURE ( PC )

In PC mode, you can adjust the H,V-Position, H-Size and Phase. Also you can adjust them
automatically.

Position

You can change H, V-Position, H-Size and Phase in PC mode like usual PC monitors. You can
also adjust them automatically. (Auto adjust function.)

1. Press Menu/set button to display
the main OSD menu.

2. Select the picture main menu
with , button.

3. Press Menu/Set to enter the sub
menu.

4. Select Position and press
Menu/Set to enter the under
menu. Then the picture
Geometry under menu will
appear.

1. Select the item to adjust
with , button.

2. Press Menu/Set button.

3. Then the cursor moves on the
bar and you can adjust the
value with , button.

4. To adjust these items,
automatically, select Auto
Adjust and press Menu/Set
button.

* For more detail description refer to the next page .

39

OWNER'S MANUAL

H-POSITION

PICTURE ( PC )

V-POSITION

PHASE

◀

◀

Mismatch Match

▶

▶

40

OWNER'S MANUAL

SOUND

In SOUND Menu, you can adjust balance, MTS ( Multi-Track Sound), AVC (Auto Volume Control) and
select the equalizer settings.

Balance

This control allows you to adjust the balance of the lef t and right speaker output.

1. Press Menu/set button to display the
main OSD menu.

2. Select the SOUND main menu.

3. Press Menu/Set to enter the sub menu.

4. Select Balance and press Menu/Set key.

5. Adjust the balance with , keys
and press Exit button.

Sound Mode

Your TV has four automatic sound settings (“Standard”, “Movie”, “Music” and “News”) that
are preset at the factory. You can activate either Standard, Movie, Music or News by pressing

“SOUND” on the remote control (or by making a selection from the menu) or you can select
“Custom” which automatically recalls your personalized sound settings.

1. Press Menu/set button to display the main
OSD menu.

2. Select the SOUND main menu.

3. Press Menu/Set to enter the sub menu.

4. Select Sound Mode and press Menu/Set
to enter the sub menu. Then the Mode
sub menu appear.

5. Select the equalizer setting and press
Menu/Set button.

6. You will see the equalizer bars. Just
press Exit button on the remote control.
You can adjust each values of equalizer,
but the changed values are stored as in
USER mode.

* USER mode require more settings.

It has sub menu: See next page.

41

OWNER'S MANUAL

SOUND

User

You can use the OSD menu to change the Treble, Bass, Balance and DRC according to
your preference.

Select USER mode (Previous page)

1. equalizer menu appear when you
select USER mode.

2. Select a gain bar with , button
on the remote control and adjust it
with / button.

3. Press Exit button on the remote
control to exit equalizer. The result
will be saved automatically.

Spatial Effect

This function can create surround effect such as the sound seems to come from all directions.

1. Press Menu/set key to display the main
OSD menu.

2. Select the SOUND main menu item
with / button.

3. Press Menu/Set to enter the sub menu.

4. Select Spatial effect. Then the cursor
moves into the ◄► parts.

5. Turn on or off Spatial effect function
with / button and press Exit
button.

AVC ( Auto Volume Control )

This function adjust sound volume level automatically depending on the source.

1. Press Menu/set button to display the
main OSD menu.

2. Select the SOUND main menu.

3. Press Menu/Set to enter the sub menu.

4. Select AVC. Then the cursor moves
into the ◄► parts.

5. Turn on or off AVC function with /
button and press Exit button.

42

OWNER'S MANUAL

SOUND

MTS

- Select sound signal format from the input source. There are Mono, Stereo and Bilingual
sound formats.

1. Press Menu/set button to display
the main OSD menu.

2. Select the SOUND main menu
with / button on the
remote control.

3. Press Menu/Set to enter the sub
menu.

4. Select MTS and press Menu/Set
to enter the sub menu. Then the
MTS sub menu appear.

5. Select the MTS format with /
and press Menu/Set button .

** The available sound formats are
displayed. Usually, you can see Mono
and Stereo.

NICAM: A Digital stereo sound format for analog TV from BBC. If a programme transmit NICAM
sound signal, you can hear high quality digital stereo sound.

43

OWNER'S MANUAL

SET UP

In SET UP menu, you can adjust the transparency of the OSD menu and set PIP and others.

Translucent

- Adjust the transparency of the OSD menu. There are 8 step from OFF to 7.

1. Press Menu/set button to display the
main OSD menu.

2. Select the SET UP main menu
with / keys on the remote control.

3. Press Menu/Set to enter the sub
menu.

4. Select Translucent. Then the cursor
moves into the ◄► parts.

5. Adjust with & button and press
EXIT button.

PIP ( Picture In Picture)

- You can watch two programmes or sources at the same time. And set up PIP size and position

1. Press Menu/set button to display the
main OSD menu.

2. Select the SET UP main menu
with / keys on the remote
control.

3. Press Menu/Set to enter the sub
menu.

4. Select PIP and press Menu/Set to
enter the sub menu. Then the PIP
sub menu appear.

PIP Window

44

OWNER'S MANUAL

SET UP

Size in PIP ( Picture In Picture )

- Change the size of the PIP window. There are 3 sizes: Small, Large, Twin

1. Select Size and press Menu/Set button.

2. Adjust size function with / button and press Menu/Set button.

SMALL LARGE TWIN

Source in PIP

- Change the source of the PIP window.

1. Select Source and press Menu/Set
to enter the sub menu. Then the PIP
sub menu appear.

2. The available sources will be
displayed. Select the source and
press Menu/Set button.

Main

PIP

HDMI

DVI

O
O
O
O
O
O
X
X
X

HDMIPCComponent2Component1S-Video / AVSCART 2SCART 1TV

OOOOOOOOTV
OOOOOOXOSCART 1
OOOOOXOOSCART 2
OOOOXOOOS-Video
OOOXOOOOComponent1
OOXOOOOOComponent2

XXOOOXXOPC
XXOOOXXODVI
XXOOOXXO

45

OWNER'S MANUAL

Picture Swap in PIP ( Picture In Picture )

- Swap the sources of the main screen and the PIP window.

* Select Picture Swap and press Menu/Set button.

Position in PIP

- Change the position of the PIP window.

1. Select Position with / button
on the remote control and press
Menu/Set to enter the sub menu.
Then the PIP sub menu appear.

2. In Sub Menu, there are four positions.
Select the position with /
button on the remote control and
press Exit button.

SET UP

46

OWNER'S MANUAL

SET UP

SET UP

Advanced

- You can se up ID, Burn Protect, Blue Back, Language and Front Key Lock in Advanced Menu.

1. Press Menu/set button to display
the main OSD menu.

2. Select the SET UP main menu
with / button on the
remote control.

3. Press Menu/Set to enter the sub
menu.

4. Select Advanced and press
Menu/Set button to enter the
Advanced menu. Then the
advanced sub menu appear.

Set ID in Advanced

- Set the ID of TV for mass-controlling through the serial port.

1. Select Set ID. Then the cursor
moves into the ◄► part.

2. Adjust with / button and
press Exit button.

Blue Back in Advanced

You can set to display blue-color screen instead of noise screen.

1. Select Blue Back. Then the cursor
moves into the ◄► parts.

2. Turn the function on or off with /
button and press Exit button.

47

OWNER'S MANUAL

SET UP

Language in Advanced

Set the language to use in OSD.
Supported languages are English, French, German, Spanish, Italian.

1. Select language and press
Menu/Set button.

2. Choose the Language with /
button and press Exit button.

Front Key Lock in Advanced

Lock the OSD panel of the TV monitor. It can protect the TV monitor from children’s power
on/off or other operation by miss.

1. Select Front key Lock. Then the
cursor moves into the ◄► parts.

2. Turn the function on or off with /
button and press Exit button.

48

OWNER'S MANUAL

TIME

In the TIME menu, you can set the current time and auto power on / off.

Time Set

Set the current time.

1. Press Menu/set button to display
the main OSD menu.

2. Select the TIME main menu.

3. Press Menu/Set to enter the sub
menu.

4. Select Time Set by pressing
Menu/Set button.

5. Move the cursor by pressing ,
button and adjust time by ,
button.

On Time

This TV can be set to turn on automatically at specific time that you choose.
Before using the timer, you must set the TV’s Time as described previously.

1. Press Menu/set button to display

the main OSD menu.

2. Select the TIME main menu

with / button on the
remote control.

3. Press Menu/Set to enter the sub

menu.

4. Select On Time with /

button and press Menu/Set
button.

5. Move the cursor by ,

button and adjust time by ,
button.

O n T i m e AM 05:11 ON

Activated

Item Name

Auto power-on time

49

OWNER'S MANUAL

On Channel

Set the channel when TV power turn on automatically.

** Available only when the Time is set and On Time is ON.

1. Press Menu/set button to display
the main OSD menu.

2. Select the TIME main menu
with / button on the
remote control.

3. Press Menu/Set to enter the sub
menu.

4. Select On Channel.

5. Enter to the ◄► part. Then t he
cursor moves into the ◄► parts.

6. Adjust the channel with /
button. Press Exit button to
return.

TIME

On Volume

Set the sound volume level when TV power on automatically.

** Available only when the Time is set and On Time is ON.

1. Press Menu/set button to display
the main OSD menu.

2. Select the TIME main menu
with / button on the
remote control.

3. Press Menu/Set to enter the sub
menu.

4. Select On Volume.

5. Enter to the ◄► part. Then t he
cursor moves into the ◄► parts.

6. Adjust the sound volume level
with / button.

50

OWNER'S MANUAL

TIME

Off Time

This TV can be set to turn off automatically at specific times that you choose.
Before using the timer, you must set the TV’s clock as described previously.

1. Press Menu/set button to display
the main OSD menu.

2. Select the TIME main menu
with / button on the
remote control.

3. Press Menu/Set to enter the sub
menu.

4. Select Off Time with /
button on the remote control and
press Menu/Set button.

5. Move the cursor with /
button and adjust time with /
button.

Off T i m e AM 05:11 ON

Item Name

Auto power-on time

Activated

Sleep

You can set your TV to automatically turn off after a preset interval.
If you turn off the TV in the state of setting up sleep time and turn on again, sleep time
erased therefore set up again. The time period runs from OFF(0min) to 180min. (OFF, 10min,
20, 30, 60, 90, 120, 150, 180)

1. Press Menu/set button to display

the main OSD menu.

2. Select the TIME main menu.

with / button on the
remote control.

3. Press Menu/Set to enter the sub

menu.

4. Select Sleep with / button

on the remote control.

5. Enter to the ◄► part. Then t he

cursor moves into the ◄► parts.

6. Set the time period with /

button.

7. Press Exit button to return.

51

OWNER'S MANUAL

PICTURE

MODE

Standard

Vivid

Mild

User

TEMPERATURE

VIDEO NR

VIDEO NR ON/OFF

COLOR ENHANCER

SCREEN FORM

Contrast

Brightness

Color

Sharpness

Tint (Only For NTSC)

Recall

WARM2, WARM1, NORMAL, COOL1, COOL2

COLOR ENHANCER ON/OFF

16:9, PANORAMA, ZOOM1, ZOOM2, 4:3

BLACK ENHANCER

SOUND

BALANCE

SOUND MODE

BLACK ENHANCER ON/OFF

STANDARD

MOVIE

MUSIC

NEWS

USER

EQUALIZER (PRESS SET)

100Hz, 500Hz, 1.5KHz, 5KHz, 10KHz

SPATIAL EFFECT

AVC

MTS

SPATIAL EFFECT ON/OFF

AVC ON/OFF

MONO, STEREO, SAP

52

OWNER'S MANUAL

SET UP

TRANSLUCENT

PIP

SIZE

SOURCE

PICTURE SWAP

POSITION

ADVANCED

SET ID

BLUE BACK

LANGUAGE

Front Key Lock

OFF, SMALL, LARGE, TWIN

RIGHT DOWN, RIGHT UP, LEFT UP, LEFT DOWN

0~99

BLUE BACK ON/OFF

NATIONAL SELECTIONS

FRONT KEY LOCK ON/OFF

53

OWNER'S MANUAL

TIME

TIME SET

TV

ON TIME

ON TIME ON/OFF

ON CHANNEL

ON VOLUME

OFF TIME

SLEEP TIME

SELECTION

1~100

OFF, 10, 20, 30, 60, 90, 120, 150, 180 Min

AUTO SCAN

Fine Tune

FINE TUNE

EDIT

54

OWNER'S MANUAL

PICTURE

MODE

Standard

Vivid

Mild

User

TEMPERATURE

GEOMETRY

H-POSITION

V-POSITION

DIVIDE

PHASE

SCREEN FORM

Contrast, Bright, Color, Tint, Sharpness, Recall

WARM2, WARM1, NORMAL, COOL1, COOL2

16:9, 4:3

55

OWNER'S MANUAL

SOUND

BALANCE

SOUND MODE

STANDARD

MOVIE

MUSIC

NEWS

USER

SPATIAL EFFECT

SET UP

TRANSLUCENT

EQUALIZER (PRESS SET)

AVC

AVC ON/OFF

PIP

SIZE

OFF, SMALL, LARGE, TWIN

SOURCE

PICTURE SWAP

POSITION

RIGHT DOWN, RIGHT UP, LEFT UP, LEFT DOWN

100Hz, 500Hz, 1.5KHz, 5KHz, 10KHz

SPATIAL EFFECT ON/OFF

ADVANCED

SET ID

BLUE BACK

LANGUAGE

FRONT KEY LOCK

0~99

BLUE BACK ON/OFF

NATIONAL SELECTIONS

FIRONT KEY LOCK ON/OFF

56

OWNER'S MANUAL

TIME

TIME SET

ON TIME

ON TIME ON/OFF

ON CHANNEL

ON VOLUME

OFF TIME

SLEEP TIME

SELECTION

1~100

OFF, 10, 20, 30, 60, 90, 120, 150, 180 Min

57

OWNER'S MANUAL

Troubleshooting

Before you call a service technician, please scan this list of problems and possible solutions. It
may save you time and money.

Quick Action for Possible SolutionProblem

No picture & No sound

Picture OK & No sound

The remote control doesn't work

Digital broadcasting screen
problem

No or Poor color or Poor picture

Strange sound form the Monitor

Check whether the Monitor is turned on.

Power cord inserted into wall outlet?
Plug another product’s power cord into the wall outlet where the

Monitor’s power cord was plugged in.
Press the VOLUME( X ) key.

Check the audio input signal.
Check to see if there is any object between the Plasma

Display and the remote control causing obstruction.
Check to see if the batteries are installed with the correct
polarities.

Check the digital signal strength and input antenna.

Select Color in the Picture and press key.
Keep a certain distance between the Monitor and the VCR.
Activate any function to restore the brightness of the picture.
Check to see that both the monitor and the source are plugged

in and turned on.
Adjust the Brightness or Contrast settings.The image is too light or too dark
Adjust the Size settings.The image is too large or too small
Adjust Balance in the Sound Menu.No output from one of the speakers
Typical sound due to normal Monitor operation, Monitor is not

faulty.

58

OWNER'S MANUAL

Specification – 32 Inch LCD – HL-3200V

32” LCD TV

Function and Display Specification

32-Inch 16 : 9 Diagonal ScreenDisplay Size
Variable 4 Modes (4:3 Mode/ 16:9 X 3 Modes)Display Mode
1366x768 Physical Pixel Pixel Format
500:1Contrast Ratio

Brightness

PIP

Video

Dimension / Weight

500 cd/

㎡

1280 X 1024 / 60Hz Max Input Resolution
Advanced multi-windows viewing PIP(picture in picture) with four selectable window positions on

Video mode
Multiple input compatibleInput compatible

Advanced motion digital / Motion-Adaptive De-interlace process,
Digital progressive line scaling.

TV/CATV (PAL/SECAM)Tuner Module
Favorite channel programming, Time Set, Set the Sleep timer, TTXprogramming
480i/p(60Hz) , 576i/p(50Hz), 720p(50/60Hz) , 1080i(50,60Hz) HDTV Input
Selectable 5 Mode (Warm1,2, Normal, Cool1,2)Color temperature

792mm(W) X 486.6mm(H) X 101mm(D) / 18 kgMain Only

Miscellaneous

Audio

Power Consumption

Connectivity

792mm(W) X 554.6mm(H) X 270mm(D) / 20 kgWith Stand
992mm(W) X 554.6mm(H) X 270mm(D) / 24 kgWith Stand and Speaker

Built-in amplifier and two speaker(7Watt/Typ.) systems (optional),
Selectable fixed/variable audio output(optional)

Front OSD Key Control, Remote control, RS232C ControlExternal Control

AC 100 ~ 240V 50/60HzInput Power
150 WattPower consumption

RF/CATV (PAL/SECAM)TV1,2 Input
SCART X 2Port [SCART1(Full) , SCART2(Full)]Scat1,2 Input
RCA X 1Port (AV INPUT)Composite Input

RCA X 2Port (Y, Pb/Cb, Pr/Cr : 480i, 480p, 576i, 576p, 720p, 1080i)Component1,2 Input
Mini Din 4Pin X 1PortS-Video Input

Mini D-Sub 15Pin X 1Port / HDTV Input(480p, 576p, 720P(50/60Hz), 1080i(50/60Hz))PC Input
Mini D-Sub 29Pin X 1Port / HDTV Input(480p, 576p, 720P(50/60Hz), 1080i(50/60Hz))DVI Input
RCA X 3PortAudio Input
Cinch Type X 4Port(Stereo L/R), Head Phone Jack X 1PortSpeaker Output
Mini D-Sub 9Pin X 1PortExternal Control Port

HDMI X 1 PortHDMI Input

59

OWNER'S MANUAL

Specification – 37 Inch LCD – HL-3700V

37” LCD TV

Function and Display Specification

37-Inch 16 : 9 Diagonal ScreenDisplay Size
Variable 4 Modes (4:3 Mode/ 16:9 X 3 Modes)Display Mode
1366x768 Physical Pixel Pixel Format
500:1Contrast Ratio

Brightness

PIP

Video

Dimension / Weight

500 cd/

㎡

1280 X 1024 / 60Hz Max Input Resolution
Advanced multi-windows viewing PIP(picture in picture) with four selectable window positions on

Video mode
Multiple input compatibleInput compatible

Advanced motion digital / Motion-Adaptive De-interlace process,
Digital progressive line scaling.

TV/CATV (PAL/SECAM)Tuner Module
Favorite channel programming, Time Set, Set the Sleep timer, TTXprogramming
480i/p(60Hz) , 576i/p(50Hz), 720p(50/60Hz) , 1080i(50,60Hz) HDTV Input
Selectable 5 Mode (Warm1,2, Normal, Cool1,2)Color temperature

915mm(W) X 557mm(H) X 102mm(D) / 24 kgMain Only

Miscellaneous

Audio

Power Consumption

Connectivity

915mm(W) X 625mm(H) X 270mm(D) / 26 kgWith Stand
1108mm(W) X 625mm(H) X 270mm(D) / 30 kgWith Stand and Speaker

Built-in amplifier and two speaker(7Watt/Typ.) systems (optional),
Selectable fixed/variable audio output(optional)

Front OSD Key Control, Remote control, RS232C ControlExternal Control

AC 100 ~ 240V 50/60HzInput Power
180 WattPower consumption

RF/CATV (PAL/SECAM)TV1,2 Input
SCART X 2Port [SCART1(Full) , SCART2(Full)]Scat1,2 Input
RCA X 1Port (AV INPUT)Composite Input

RCA X 2Port (Y, Pb/Cb, Pr/Cr : 480i, 480p, 576i, 576p, 720p, 1080i)Component1,2 Input
Mini Din 4Pin X 1PortS-Video Input

Mini D-Sub 15Pin X 1Port / HDTV Input(480p, 576p, 720P(50/60Hz), 1080i(50/60Hz))PC Input
Mini D-Sub 29Pin X 1Port / HDTV Input(480p, 576p, 720P(50/60Hz), 1080i(50/60Hz))DVI Input
RCA X 3PortAudio Input
Cinch Type X 4Port(Stereo L/R), Head Phone Jack X 1PortSpeaker Output
Mini D-Sub 9Pin X 1PortExternal Control Port

HDMI X 1 PortHDMI Input

60

OWNER'S MANUAL

WARRANTY & INFORMATION

Please check out regularly our web site for further updates and assistance about this product: www.hbdirect.com

Important safety information

Read these instructions carefully and pay attention to all warnings and guidelines.
Do not overload electrical sockets or extension cables. Overloading can result in fire or electric shock. Never insert
objects into the unit. They might come into contact with dangerous voltag e points or short-circuit components, which
can cause fire or electric shock. Do not spill liquids on the unit. If the unit does not function normally, or if it emits
unusual sounds or odors, pull out the plug immediately and contact an authorized technician. Do not attempt to
service the unit yourself. If you open or dismantle the shielding, you expose yourself to dangerous voltage and other
hazards. All maintenance must be carried out by qualified service technicians.

Environmental information

The system is made of recyclable materials which can be reused if disassembled by authorized personnel. Please
follow local regulations for the disposal of packaging materials, used batteries and discarded units.
Warranty certificate
H&B provides a twelve (12) month warranty from the date of purchase against material and manufacturing defects.
In the event of defects covered by the warranty, the product must be returned to the dealer that sold the product. If
any problems arise, information on our authorized service centers is available the dealer who sold the product.

Recycling information

Your new product and its packaging contain materials that can berecycled and reused. Specialized companies can
recycle your product. Your product uses batteries that should not be thrown away when depleted but should be disp
osed of as small chemical waste. Please find out about the localregulations on disposal of your old product, batterie
s, and packaging whenever you replace your existing equipment.
Please contact your local dealer for more information on how to recycle your product

Terms of Warranty

1. The warranty is only valid on presentation of a correctly completed warranty certificate and sales ticket, and if the
serial number on the product is fully legible.

2. The obligations of H&B are limited either to repair or replacement of defective components. The repair or
replacement of defective components is based on an assessment byH&B.
Exchange is only possible if the repair cannot be performed.

3. Warranty repairs must be performed by an authorized H&B dealer, or an authorized service centre. No
remuneration is provided for repairs performed by unauthorized workshops.
Any repairs or damage to the product caused by unauthorized intervention are not covered by this warranty.

4. This product will not be viewed as defective, either in materials or in manufacture, if adaptation to nation al, local,
technical or safety-related requirements is required in countries other than the specific country for which the product
was originally designed and manufactured.

5. This warranty does not cover these types of adaptations, and no remuneration will be offered for these types of
adaptations or for any consequential damages. The warranty does not cover the following:

- Periodic inspection, maintenance and repair or replacement of parts resulting from normal wear.

- Costs connected to transport, disassembly or installation of the product.

- Misuse, including use for other purposes than was intended or faulty installation.

- Damage caused by lightning, water, fire, natural catastrophes, war, insurrection, incorrect line voltage, insufficient
ventilation or other causes beyond the control of H&B.

6. This warranty applies to every legal owner of the product during the warranty period.

Distributor

H&B products are distributed by:
JPF Entertainment
ZAC Barbusse Chandon
201, avenue Laurent Cély
92230 Gennevilliers
FRANCE
[e-mail]
www.hb-direct.com
Tel + 33 1 58.81.05.20 - Fax + 33 1 58.81.05.30

OWNER'S MANUAL