Hayward TriVac 500, TriVac 700 Owner's Manual
Hayward Pool Products
620 Division Street | Elizabeth, NJ 07201
www.Hayward-Pool.com
TriVac 500 and 700
Pressure Pool Cleaner
owners manual
2
SAFETY FACTS
DO NOT use to remove large debris in new pools.
REMOVE the cleaner before chemically shocking your pool
DO NOT swim with cleaner
Store the cleaner in a shaded safe area
Hoses must be stored straight. DO NOT coil the hose
Keep away from childrens and pets
REMOVE cleaner when performing backwash
REMEMBER safety rst
TOOLS
LEGEND
Tip
Warning Booster pump
Filtration pump Pool chemicals
3
CARTON CONTENTS
1x
1x
1x
1x
GENUINE PARTS
TriVac 500 and 700
1x
1x
TriVac 500 or TriVac 700
WALL CONNECTION CLEANER SIDE
Main hose section
Cleaner connector
hose and sweep tail
4
PREPARING THE POOL
Manually remove very large and
excessive debris from pool (ie.
post storm, spring cleaning / pool
opening situations).
DEDICATED RETURN LINE
Perform a backwash, clean your
lter, skimmer baskets and pump
basket.
pH : 7.2 - 7.6
Chlorine : 0.5 - 1.5 P.P.M
Total Alkalinity : 80 - 150 P.P.M
OR
POOL CHEMICALS
Universal wall tting
1 1/2 inch NPTF
x 3/4 inch NPTM
adapter
(NOT INCLUDED)
BACKWASH
1-1\2 inch
dedicated return
line 1-1/2 female
thread
+
3/4 inch
dedicated return
line 3/4 female
thread
Universal wall
tting
+
+
5
CONNECTING THE TRIVAC
INSTALLING WALL FITTING
Remove plug or existing universal
wall tting from previously installed
pool cleaner (if any).
When installing or reinstalling the universal
wall tting use Teon tape
on its plastic threads.
Screw the universal wall tting into
the dedicated line.
(see p.4)
DEDICATED LINE
Connect pressure hose with the wall
quick connect
Lay the hose straight for 3 hours
OR run on bottom mode for a full
cleaning cycle.
Loading...