Hayward ISSC100AU Owner's Manual

P/N: ISSC100AU

Owners manual

2 Wheel & 4 Wheel

Suction-Side Poolcleaners

Hayward Pool Products (Australia) Pty Ltd.

Melbourne-Sydney-Brisbane-Perth

Email: [e-mail] Website: www.hayward-pool.com.au

P.O Box 4384, Dandenong South, VIC, 3164

ABN 66 083 413 414

Sales Ph 1300POOLS1 Fx 1300POOLS2

FEATURES

SELF ADJUSTING TURBINE VANES

All the cleaners have the patented self-adjusting turbines, which maximize the power from the water flow. This turbine is
similar to a paddle wheel with blades that are adjustable. This feature allows the cleaner to still move at low suction and low
pressure. In addition the folding vanes of the turbine allow for the easy passage of larger debris through the cleaner.

STEERING SYSTEM

ranging from 90 to 540 degrees. This feature allows the cleaner to cover not only the deep end, but also the shallow end.

This steering system allows for the 2x Suction cleaner to travel 2.4 to 3 metres before it turns, and the 4x Suction cleaner will travel

3.3 to 4.2 metres before it turns. The cleaner cleans more in the shallow end than any other cleaner. The cleaner has no problem
with uneven surfaces or strange shapes. It won’t stick in a corner, or get hung up by a main drain.

ROBUST TIRE TREADS

One look and you will see that the patented tire treads give the cleaner better climbing ability and obstacle maneuverability.
The tires come with tread wear markers that show you when to replace your tires. The front tires of the cleaner have humps
(raised treads) that allow the cleaner to overcome any reasonable obstacles such as the main drain and uneven surfaces. This
makes the Cleaner ideal for all pool surfaces and shapes.

SELF-CLEANING SWIVEL

This is a feature that allows the cleaner to turn freely without interference from the hose due to debris buildup in the swivel
hose cone. By self-cleaning, the swivel prevents the hose from coiling. (Note: Sometimes with severe debris one needs to
hold it under a water faucet for cleaning).

WALL CLIMBING

The cleaner has patented adjustable skirts that allow the cleaner to maintain optimal suction under the machine even when

-

stacle while maintaining suction under the cleaner.

SAFETY FACTS

• DO NOT use to remove large debris in new pools.

• REMOVE the cleaner before chemically shocking your pool.

• DO NOT swim with cleaner

• Store the cleaner in a shaded safe area.

• Hoses must be stored straight. DO NOT coil the hoses.

• Keep away from children and pets.

• REMOVE cleaner when performing backwash.

• REMEMBER SAFETY FIRST

1

PARTS

2 wheel model 4 wheel model

1x 1x2x 2x1x 1x

1x 1x1x 1x1x 1x

9x 11x

1x 1x

Installing the Cleaner

STEP 1

1. Manually remove very large and excessive debris from pool
( ie. post storm, spring cleaning/pool opening situations).

2. Perform a backwash, clean your lter, skimmer baskets and
pump basket.

; preparing your pool.

3. Make sure your chemical balance is correct. If not, now is
the time to correct it. If you chemically shock the pool, wait a
day or two before continuing.

4. Point all your return ttings downward.

2

™

2. Connect all the hoses (except the Leader Hose).
Connect male to female. If need be wet the hoses
for easier assembly. Now connect Leader Hose to
the end.

3. The connected hoses should be one to two
lengths longer than the furthest point from the

STEP 2; connecting the hoses.

1.

2.

0.5m - 0.63m

3.

STEP 3; attaching the cleaner.

0.5m - 0.63m

+1

+1

3