Hayter M10 134E Instruction Book
)
M10/30
HERITAGE TRACTOR
CODE 134E
INSTRUCTION BOOK
ode Serial No.
34E 290000001
Issue 12/2009
C
AUTION: Read and
f
ollow all instructions.
Part No. 111-3047 (Rev D
1742440
Revision D
1
12 3
7
8
12
1
2
3
4
4
+
MAX 90N
9
10 11
5
+
MAX 150N
6
13
2
5
67
8
9
10 11 12
25x3
1001054
13
17x146
17x47
14
15
3
327349
2x82
14x79
3
2
4 (17x47)
3
4
8
1
7(25x3)
6(17x146)
1
5
1
5
4
5 (1001054)
6 (2x82)
6
6 (2x82)
1
4
4
5
9
6
8
7 (14x79)
3
2
7
2
3
1
6
3
7
45
2
8
1
9
8
9
7
10
1
"
!
4
11
6
2
7
12
13
1
5
15
1
1
14
16
3
2
3
2
5
LIMITED WARRANTY
Hayter Limited warrants to the original user / purchaser that this unit shall be free from defects in material and
workmanship under normal use and service for a period ofthree years from the date of purchase. The manufacturer of the engine furnish their own warranty and services are provided through their authorised network (Refer
to “Engine Warranty Statement”). Toqualify for the full benefit ofthe warranty, the warranty registration cardmust
be returned within 60 days of purchase. Subject to theconditions and exclusions notedin this limited warranty, we
shall at our option, repair or replace any warranted part during the applicable period. If you are in doubt or experience any difficulty, please consult a Hayter Authorised Service Dealer for clarification.
To qualify for the extended warranty (second and third year) of the three year limited warranty, the machine must
have annual services carried out by an Authorised Hayter Service Dealer. These chargeable services should be
carried out within 12 and 24 months of the date of purchase.
Excluded from the extended warranty period are those items which are subject to normal wear andtear e.g. tyres,
wheels, cutterblades, cables, batteries and other consumable wearing parts.
All consumer machines which are fitted with a genuineHayter friction disc as original equipment, before use, are
covered by a Lifetime Warranty against the engine crankshaft bending. Note: friction washers, blade brake
units and other such devices are not applicable. Only machines fitted with a genuine Hayter friction disc, which
are used in accordance with the recommended operating and maintenance procedures, are covered.
This warranty does not apply to any unit that has been tampered with, altered, misused, abused or used for hire,
and will become invalid if non genuine Hayter parts are fitted. This warranty does not cover minor mechanical
adjustments unless they are due to defective materials or workmanship. Consult the Owner’s Handbook or a
Hayter Authorised Service Dealer for assistance when making these adjustments.
A warranty period of 90 days applies to machines used for commercial purposes.
To make a warranty claim, return the unit to a Hayter authorised dealer along with proof of purchase stating the
machine serial number and date of purchase. The service receipt(s) or this Owner’s Handbook with the 1st/2nd
year service boxes fully completed, must be produced as proof of entitlement to the extended warranty period.
Subject to the conditionsand exclusionsin thislimited warranty, the authorised dealer will, at our option, repair or
replace any warranted part within the duration of the warranty period.
This limited warranty gives you specific legal rights and is in addition to any statutory rights to which you may be
entitled and your statutory rights are not affected by this warranty. If you need additional information concerning
this written warranty, or assistance in obtaining services, please write to:
HAYTER LIMITED, Service Department, Spellbrook, Bishop’s Stortford, Hertfordshire CM23 4BU.
1st
Year
Service
Record
Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Signed . . . . . . . . . . . .............................
2nd
Year
Service
Record
Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Signed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
Loading...