Hayter Envoy 36 Electric 100J Instruction Manual
Envoy 36 Electric
Codes 100J
Original Version (EN)
Issued: 12.11.13
From Serial Number: 314000001 and up
Part number: 3374-351 Rev B
CONTENTS
2
Introduction 3
Main Features / Specications 4
Safety Precautions 5 - 6
Training 5
Preparation 5
Safety Symbols 5 - 6
Operation 5 - 6
Maintenance & Storage 6
Control Symbols 6
Assembling the Mower Before First Use 7
Delivery Checklist 7
Handlebar 7
Grassbag Assembly 7
Grassbag Attachment 7
Supply Cable 7
Electrical Connection 7
Operating the Mower 8 - 10
Starting 8
Forward Travel 8
Turning 8
Stopping 8
Height of Cut 8
Before Mowing 8
Grassbag 8
Without Grassbag Collection 8
Heavy Growth 9
Non Grassed Areas 9
Safe Mower Practice 9
Overloading Protection 9
Maintenance Schedule 10
Mower Maintenance 10 - 11
Grassbag 10
Deck Housing 10
Securing Nuts and Bolts 10
Lubrication 10
Cutterblade Removal 10
Cutterblade Sharpening 11
Supply Cable 11
Storage 11
Lawn Care Calendar 12
Trouble Shooting 13
Warranty 14
EU Privacy Statement 15
Notes 15
Customer Information 16
INTRODUCTION
3
Thank you for purchasing a Hayter mower. The following pages are designed to help you gain
safe and efcient service from your machine.
IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it gives
essential information regarding mower safety, operation, maintenance and specications. Read
and understand this handbook prior to operating your mower for the rst time. Make sure you
are familiar with all the controls and points of regular maintenance. If you have any doubts,
consult your local Hayter authorised dealer who will be pleased to give you assistance.
IMPORTANT: This mower is designed solely for use in a domestic grass cutting environment.
Use in any other way is considered as contrary to the intended use. Compliance with and strict
adherence to the conditions of operation, service and repair as specied in this handbook also
constitute essential elements of the intended use.
This mower should be operated, serviced and repaired only by persons who are familiar with its
particular characteristics and who are acquainted with the relevant safety procedures.
The safety precautions listed in this handbook and all other generally recognised regulations on
safety must be observed at all times.
Use of non standard parts or any arbitrary modications carried out on this machine may relieve
Hayter Limited of liability for any resulting damage or injury.
Hayter mowers are robustly constructed and designed for efcient economical performance
under normal mowing conditions. Correct operation and maintenance will ensure a long and
satisfactory service life. Prior to despatch from our factory every effort is made to ensure that
your mower is delivered in perfect condition.
Throughout this handbook all references to left and right are as viewed from behind the
handlebar, in the direction of forward travel.
This handbook is based on information available at the time of publication.
HAYTER LIMITED reserve the right to amend product specications without prior notication.
Please be advised that the illustrations in this Handbook are generic and not specic to your
product.
For a full range of products and to locate your nearest authorised sales stockist, service or parts dealer please visit our website at www.hayter.co.uk
4
MAIN FEATURES SPECIFICATIONS
2
6
4
3
1
1
11
8
1
7
9
10
5
1. Handlebar Securing Knob 7. Grassbag Assembly
2. Supply Cable 8. Rear Deector
3. Switch Control 9. Serial Number Label
4. Bail Arm 10. Height Of Cut Lever
5. Handlebar 11. Motor Housing
6. Cable Cleat
Code
100
Weight
22 kg
Length
1360 mm
Width
405 mm
Height
1050 mm
Width of Cut
360 mm
Height of Cut (7 positions)
13 - 60 mm
Volts and Frequency
230V / 50 Hz
Power
1.4 kW
Cutterblade Speed
2950 rpm
Fuse Rating
13 amp
SAFETY PRECAUTIONS
5
Safety Alert Symbol
This safety alert symbol indicates important safety messages.
When you see this symbol be alert to the possibility of injury.
Carefully read the following and inform others.
Your mower is perfectly safe if used correctly. Failure to
observe the following precautions may result in serious
injury.
Training
Before using the mower read the owners handbook carefully. Pay
particular attention to the safety precautions. Ensure that you are
familiar with the controls and the proper use of the equipment.
Learn how to stop the mower quickly in an emergency.
Never allow children or people unfamiliar with these instructions
to use the mower. Local regulations can restrict the age of the
operator.
Never mow while people, especially children, or pets are nearby.
Keep in mind that the user is responsible for accidents or hazards
occurring to other people or their property.
Preparation
It is recommended that a high sensitivity Residual Current
Operated Circuit Breaker (RCCB) with a trip current of not more
than 30mA is installed at the mains socket. This will provide the
user with additional protection against electric shock. The fuse
installed in the plug only provides protection for the electrical
equipment and will not safeguard against electrocution. Always
check the RCCB before using the mower.
WARNING: Regularly inspect the supply cable for signs of
damage or ageing. Replace immediately if defective.
While mowing, always wear substantial footwear and long
trousers. Do not operate the equipment when barefoot or wearing
sandals.
Thoroughly inspect the area where the mower is to be used and
remove all objects which may be thrown by the machine.
A damaged cutterblade or loose xing bolt are major hazards.
Before use, always visually inspect the cutting mechanism to
ensure that it is in good condition. A damaged cutterblade must
be replaced immediately with a genuine Hayter replacement
part.
Operation
SWITCH OFF AND REMOVE PLUG FROM MAINS:
• Before clearing blockages or unclogging the discharge
chute.
• Before cleaning/checking or working on the machine.
• Whenever you the leave the machine.
• After striking a foreign object. Inspect the machine for
damage and ensure necessary repairs are made before
restarting and operating.
• If the machine starts to vibrate abnormally (check
immediately).
• If the supply cable is entangled.
THE CUTTERBLADE CAN CONTINUE TO ROTATE
AFTER THE MACHINE IS SWITCHED OFF.
Keep the supply cable clear of the cutterblade at all times.
Do not mow across the supply cable. If this occurs, disconnect
the mains supply and check for damage. Do not use a defective
supply cable.
Mow only in daylight or good articial light.
Avoid using the machine on wet grass, where feasible.
Always be sure of your footing on slopes.
Walk, never run.
Do not mow excessively steep slopes of more than 20
O
and mow
across the face of slopes, never up and down.
Safety Symbols
Safety Alert Be Aware To
The Possibility Of Injury.
Carefully Read The Owners Handbook
Before Using The Machine
Danger Of Severing Toes Or
Fingers In Cutting Mechanism
Wait Until All Machine Components
Have Stopped Before Touching Them
Danger Of Being Hit By
Thrown Objects
Keep Bystanders At A Safe
Distance From The Mower
STOP
Loading...