Haws 5010.6427SS User Manual

INSTALLATION, OPERATION

&

MAINTENANCE INSTRUCTIONS

1455 Kleppe Lane Sparks, NV 89431-6467 [phone] Fax [phone]

E-mail: [e-mail]

NOTE TO INSTALLER: Please leave this information with the Maintenance Department.

HAWS® warrants that all of its products are guaranteed against defective material
or poor workmanship for a period of one year from date of shipment. HAWS
liability under this warranty shall be discharged by furnishing without charge F.O.B.
HAWS Factory any goods, or part thereof, which shall appear to the Company
upon inspection to be of defective material or not of first class workmanship,
provided that claim is made in writing to company within a reasonable period after
receipt of the product. Where claims for defects are made, the defective part or
parts shall be delivered to the Company, prepaid, for inspection. HAWS will not be
liable for the cost of repairs, alterations or replacements, or for any expense
connected therewith made by the owner or his agents, except upon written
authority from HAWS, Sparks, Nevada. HAWS will not be liable for any damages
caused by defective materials or poor workmanship, except for replacements, as
provided above. Buyer agrees that Haws has made no other warranties either
expressed or implied in addition to those above stated, except that of title with
respect to any of the products or equipment sold hereunder and that HAWS shall
not be liable for general, special, or consequential damages claimed to arise under
the contract of sale. The drinking fountain manufactured by HAWS is warranted to
function if installation and maintenance instructions provided are adhered to. The
units also must be used for the purpose for which they were intended.

NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED,
PROVIDED OR GIVEN BY HAWS.

SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS
MODEL, PLEASE CALL:

FOR PARTS CALL:

Model 5010.6427SS

LIMITED WARRANTY

1-800-766-5612

 website: www.hawsco.com

No.2075000 (0)

1-800-758-9378

(U.S.A. AND CANADA ONLY) MONDAY-THURSDAY: 6:00 A.M. – 4:00 P.M. PST

FRIDAY: 6:00 A.M – 1:00 P.M. PST

01/09 Model 5010.6427SS Page 1 of 4

NOTE: To remove head when used with electric water cooler, keep the inlet nipple from turning
by holding it with locking pliers inside the fountain, beneath the basin.

Step 1: Gain access to flow adjustment screw by removing cover nut and button (see

Installation Drawing).

Step 2: Adjust flow with screwdriver: clockwise for more flow, counterclockwise for less.
Step 3: If desired flow is not obtained, clean screen located at base of valve body and make

sure screwdriver stop is fully opened.

Step 4: Replace button and cover nut.

Note: Replacement cartridge, screen, and gasket are available as P/N VRK5010.

© 2009 Haws
HAWS

®

®

Corporation – All Rights Reserved

and other trademarks used in these materials are the exclusive property of Haws Corporation.

01/09 Model 5010.6427SS Page 2 of 4