Haws 2000S, 2000SN User Manual

FEATURES & BENEFITS

SenSor operated

Electric sensor allows for touch-free hygienic operation,
eliminating the need for manual activation.

Quality Control

The Haws bottle lling station is pre-built and fully water and

pressure tested to ensure no leaks and proper function for
reduced installation time and added peace of mind.

duraBle FiniSh

#4 satin stainless steel back panel can be easily cleaned

and maintained while also resisting corrosion.

ServiCing & SeCurity

Durable ABS plastic front panel allows simple access

to internal components. 30-second time-out prevents
unwanted use. Hidden lock and hinges discourage
vandals.

advanCed Filtration

2,500-gallon (9464 L) capacity, electronic lifecycle control

lter cartridge will shut off water ow when capacity
is reached to ensure fresh, ltered water with every
activation. Filter replacement indicator light will ash
yellow when lter life is at 10% and will ash red when
replacement is necessary. Preparing to replace lter is
important when the lter light ashes yellow.

eXtended Warranty

Superior engineering incorporated into this product carries an
extended 3 year warranty.

OPTIONS

o

Replacement Filter: Model 6423 is the 2,500-gallon

(9464 L) replacement lter with electronic lifecycle

control for the Hydration By Haws™ Model 2000S

o

Remote Drinking Fountain Water Chiller: Model
HCR8, 8 GPH (30.3 L) remote chiller provides for
instantaneous cooling to meet a continuous demand
for chilled water.

2000 Series Mounting Frame: Model MTGFR.HSC,

o

galvanized steel mounting frame with grille for the

2000 series bottle lling stations.

model 2000S

Recessed-Mount Hydration By Haws™ Bottle Filler

SPECIFICATIONS

Model 2000S Hydration By Haws™ water dispenser is a semi-

recessed, wheelchair accessible bottle or cup lling station
constructed of durable ABS plastic and 16-gauge, Type 304
Stainless Steel with a satin nish. It features an electric sensor

for touch-free hygienic operation, a 30-second timeout

preventing unwanted use, laminar ow to prevent splashing,
and a .5 gpm (1.9 L) ow rate for quick ll-up. 2,500-gallon
(9464 L) carbon block lter reduces chlorine (taste and odor)
and lead, and removes 99.99% of cysts. The mounting frame is

of heavy-gauge, galvanized steel. 110 volt, 60Hz, and .1 amp
draw when in use. Tailpiece is 1-1/4” (32 mm) O.D. Provision for

trap (not included) must be made in or behind wall.

APPLICATIONS

Perfect for either public or private indoor settings, the
Hydration By Haws™ water dispenser is a great t in areas

where aesthetics are important to the overall appeal of the

architecture. Specically, this type of semi-recessed, wall­mounted bottle lling station is ideal for ofce buildings,

airports, schools, manufacturing facilities and municipalities.

Model 2000S meets the Americans with Disabilities Act when

mounted at the correct height. Haws manufactures drinking

fountains and electric water coolers to be lead-free by all
known denitions including NSF/ANSI Standard 61, Section 9,

NSF/ANSI Standards 42 & 53, NSF/ANSI 372 and CSA Standard
B483.1. Product is compliant to California Health and Safety
Code 116875 (AB 1953), California Proposition 65 and the

Federal Safe Drinking Water Act. Model 2000S is certied to

the Standard for Water Treatment Appliances (UL979).

1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [e-mail] :: www.hawsco.com :: August, 2017

DISCLAIMER: Continued product improvements make specications subject to change without notice. Check www.hawsco.com for the latest product information and updates.

C

12

Haws Corporation - All Rights Reserved.

2017

MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS

(SENSOR)

47 15/16"

1217mm

(FRONT EDGE)

3 15/16"

100mm

HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.

R

FROM THE FRONT FACE OF THE WALL.

1-1/4" O.D. WASTE BEND; LOCATED

APPROX.1-13/16" [46mm] BACK

ON CENTERLINE OF PART

SOLENOID VALVE/

REGULATOR

819mm

32 1/4"

(ROUGH-IN)

[657mm]

25 7/8"

QUICK-CONNECT)

(3/8" O.D. TUBING

SUPPLY INLET

APPROVED:

JL

FV

06/13/17

DATE:

06/15/17

GC

SCALE:

N/A

DRAWING TYPE:

HAWS BOTTLE FILLER

INSTALLATION

SIZE: A

DRAWN:

5152

ECN:

DATE:

5152

CHK'D.:

JL

2000S

REVISED PER

BY:ECN NO.

MODEL(S)

E-MAIL: [e-mail]

WEBSITE: WWW.HAWSCO.COM

[phone] FAX [phone]

SPARKS, NEVADA 89431

1455 KLEPPE LANE

CONSTRUCTION

2 X 4 WALL

669mm

WASTE

26 5/16"

FRAME

EDGE)

(TO MTG

38mm

1 1/2"

FRONT FACE OF THE WALL

PORT; APPROX. 2-1/2"

[63mm] BACK FROM THE

7/8" [22mm] ELECTRICAL

JUNCTION BOX

POWER

-IN)

FILTER CARTRIDGE

DRAIN BASIN

[362 mm]

(ROUGH

14 1/4"

14-1/4" [362] WIDTH

FITS IN 2 X 4 WALL

3-15/16" [100] DEPTH

ROUGH-IN DIMENSIONS:

25-7/8" [657] HEIGHT

15" [381] WIDTH

DIMENSIONS OUTSIDE OF WALL:

30-1/4" [768] HEIGHT

0510000663.D

PART NUMBER

REVISION

SHEET OF

1