Hawking HWDN3 Quick Installation Manual

HWDN3

START HERE 

QUICK INSTALLATION GUIDE

Hi-GainTM USB Wireless-300N Dish Adapter

Mac OS X Windows XP Windows 7 & Vista

OVERVIEW

Check Package Contents

- Hi-Gain USB Wireless-300N Dish Adapter

- USB Cable

- CD: User Manual and Drivers (Mac & PC))

Contents

- Windows 7 & Vista Installation page 2

- Windows XP Installation page 9

- Mac OS X Installation page 15

This document only contains quick setup instructions. For more
settings, please refer to the User’s Manual located on the CD.

Support is available via website, email, and telephone:

Website: www.hawkingtech.com/support
E-mail: [e-mail]
Tel (Toll Free US & Canada): 888-202-3344
Tel (International): 949-206-6900

Windows 7 & Vista

IMPORTANT! Do not connect the HWDN3 until you install the driver
from the CD and are instructed to do so. Otherwise, the adapter
may not operate properly.

1. Insert the Setup CD and a menu page will automatically appear

on your screen. To begin installation click “Driver & Utility
Setup”.

2. Wait for the setup to complete.

Installation Instructions for Windows 7 & Vista

Windows 7 & Vista

3. Click “Next” to begin installation.

4. When the installation is complete you may be prompted to

restart your computer.

Windows 7 & Vista

6. For Windows 7 it is recommended to use the default Windows

network utility. To connect, click on the network icon in the
lower right corner of your desktop. Choose a network and
click “Connect”. If your network is password protected you will
be prompted to enter your password. Contact your network
administrator if you do not know your password.

5. After the restart, plug in your HWDN3, with the USB cable.