Hawking Technology guarantees that every HWDN1 Hi-GainTM Wireless-300N USB Dish Adapter with
Upgradable Antennas is free from physical defects in material and workmanship under normal use for one (1)
year from the date of purchase. If the product proves defective during this one-year warranty period, call
Hawking Customer Service in order to obtain a Return Authorization number. Warranty is for repair or
replacement only. Hawking Technology does not issue any refunds. BE SURE TO HAVE YOUR PROOF OF
PURCHASE. RETURN REQUESTS CAN NOT BE PROCESSED WITHOUT PROOF OF PURCHASE. When
returning a product, mark the Return Authorization number clearly on the outside of the package and include
your original proof of purchase.
IN NO EVENT SHALL HAWKING TECHNOLOGY’S LIABILTY EXCEED THE PRICE PAID
FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THE PRODUCT, IT IS ACCOMPANYING SOFTWARE OR ITS
DOCUMENTATION. Hawking Technology makes no warranty or representation, expressed, implied or
statutory, with respect to its products or the contents or use of this documentation and all accompanying
software, and specifically disclaims its quality, performance, merchantability, or fitness for any particular
purpose. Hawking Technology reserves the right to revise or updates its products, software, or documentation
without obligation to notify any individual or entity. Please direct all inquiries to:
Trademarks & Copyright
All brands and product names are trademarks of their respective companies. No part of this publication may be
reproduced in any form or by any means or used to make any derivative (such as translation, transformation or
adaptation) without the express written consent of the manufacturer as stipulated by the United States
Copyright Act of 1976.
Warning Statement:
Federal Communication
Commission Interference Statement
Federal Communications
Commission (FCC) Requirements, Part 15
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the
FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operation.
FCC Caution:
FCC RF Exposure Statement:
This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This
equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator
and your body. Unauthorized antenna, modification, or attachments could damage the transmitter and may
violate FCC regulations.
Regulatory information/Disclaimers:
Any changes or modifications made to this device that are not expressly approved by the manufacturer may
void the user's authority to operate the equipment.
APPENDIX A – SPECIFICATIONS......................................................................................................... 33
PRODUCT SUPPORT INFORMATION................................................................................................. 38
3
1. INTRODUCTION
Thank you for purchasing the Hawking HWDN1 Hi-GainTM Wireless 300N USB Dish Adapter.
Now you can enjoy the latest Wireless-N technology with excellent speeds, of up to
300Mbps*. Designed with Hi-Gain Dish Technology, the Wireless 300N USB Adapter extends
your wireless network coverage by up to 6 times and boosts transmission throughput 12
times more than a standard Wireless-G Network. It allows you to connect a notebook or
desktop to any wireless network** using the USB port. Now, you can stream HD video, play
games online, download music, images and data while maintaining your freedom of mobility.
The HWDN1 is also packed with security applications. For more security-sensitive
applications, the HWDN1 supports Hardware-based IEEE 802.11i encryption/decryption
engine, including 64-bit/128-bit WEP, TKIP, and AES. Also, it supports Wi-Fi alliance WPA and
WPA2 encryption. Cisco CCX V1.0, V2.0 and V3.0.
2. FEATURES
Features Advantages
High Speed Data Rate Up to 300Mbps*
IEEE 802.11b/g Compliant
Supports WPA/WPA2 (IEEE 802.11i),
WEP 64/128 bits
Dual Radios (2Tx * 2Rx)
WMM (IEEE 802.11e) standard support
* Theoretical wireless signal rate based on IEEE standard of 802.11a, b, g chipset used. Actual
throughput may vary. Network conditions and environmental factors lower actual throughput rate.
**Preferably Wireless-N network for maximum through pts.
** *All specifications are subject to change without notice.
Capable of handling heavy data payloads
such as MPEG video streaming
Fully Interoperable with IEEE 802.11b /
IEEE802.11g compliant devices with legacy
protection
Powerful & Robust data security.
Enables Smart Antenna for more range and
speed
Wireless Multimedia Enhancements Quality of
Service support (QoS) / enhanced power
saving for Dynamic Networking.
4
USB port
Dish Technology
3. PACKAGE CONTENTS
Before you begin the installation, please check the items of your package. The package
should include the following items.
•
One HWDN1 Hi-Gain Wireless 300N USB Dish Adapter
•
One USB cable (1.0m)
•
One CD-ROM with User’s Manual & Drivers
•
Quick Installation Guide
Dual Antenna –
LED
indicator
LED Description
LINK
PWR
Blinks when active connection is available else remains switched OFF
Blinks rapidly when data communication in progress else remains
switched OFF
5
4. SYSTEM REQUIREMENTS
To begin using the HWDN1 Dish Adapter, your PC/Notebook must meet the following
minimum requirements:
•
Operating System – Microsoft Windows 2000/XP/Vista
•
An Available USB Port on your Laptop or Desktop
•
256MB system memory or larger
•
750MHz CPU or higher configuration
5. Driver Installation for Windows Vista
a.
Insert the included CD an auto load page will appear instantly on you screen.
b.
Select Driver & Utility Setup
6
c.
Select Install to begin the Installation
d.
Please wait a while as the installation process take place.
e. After installation is complete, exit the wizard by clicking on the Finish
button.
f. Now, plug in your HWDN1 adapter.
7
5.1.
USING WINDOWS CONFIGURATION (VISTA)
It is recommended that you use the Windows Configuration for the Wireless-N
Adapter.
a. To open up the Windows Configuration, go to Start Connect To
b. Select the Network you wish to connect to. If you are connecting to an unsecure
network, go to step c. If you are connecting to a secured network, go to step d.
8
c. If you are connecting to an open network (unsecured network), a warning may
appear indicating that the network is an unsecured network. Select Connect
Anyway and skip step d.
d. If your selected network is a secured (encryption) network, then a window will
prompt you to enter security key or passphrase. If you are connecting to a
network that is security enabled, but do not have the security key or passphrase,
please obtain the passphrase from your Network Administrator.
9
e. Please wait while your HWDN1 is connecting.
f. The HWDN1 Wireless Dish Adapter is now connected, you may save this
network as your preferred network.
10
6. INSTALLATION (WINDOWS 2000/XP)
Important! Please Install the HWDN1 Driver & Utility before connecting the
HWDN1 into the USB port on your computer. The HWDN1 Driver & Utility is located
on the CD.
Insert the support CD into your CD Drive.
The CD drive should auto-load the following.
Open the file and you can briefly see the following…
11
Choose HWDN1 Configuration Utility & click next and then click install.
Await instructions as you see the setup progress as shown below...
12
Loading...
+ 27 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.